|
|
-
4.0 of 5.0 with 16 Reviews
SALE PRICE: $69.95
Manufacturer: Anytime Tools
Brand: Anytime Tools
Manufacturer: Anytime Tools
Brand: Anytime Tools
The professional choice! Quality Precision Measuring ToolMeasure up to 12 inches and 300mm with super high precision using this Dial caliper with dual reading faces showing inch readings in black and metric readings in redFeatures:Dial face reads in both INCH (black hand) and METRIC (red hand).Super high precision gears.Shock Proof Design.Ultra Smooth operation. Zero Parallel Tolerance. All Hardened Stainless Steel. Covered Stainless Steel Rack.Inside, outside, step and depth measurement.Raised sliding surface prevents wear and defacement of graduations.Thumb roll for rapid settingRange: 0-12"/0-300mm. Accuracy: 0.001"/0.02mmGraduation: 0.001"/0.02mmPadded case included
-
4.0 of 5.0 with 42 Reviews
SALE PRICE: $70.22 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4100-3008
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4100-3008
HHIP 4-digital electronic caliper features four-key Type: hold-key, on/off key, inch/mm key and zero key. Enter high/low dimensional limits-out of limits will Flash on display. Body is hardened stainless steel. 4-Way measurement for outside, inside, depth and step. Thumb roller for moving the slider in small and smooth increments. Hold-key can be used for data hold at any position. Standard SR 44, 1.55V battery included. With fitted case. Meets DIN 862 product specifications: range: 0-8" 0-200mm accuracy: +/-.001"/.02mm.
-
4.0 of 5.0 with 42 Reviews
SALE PRICE: $70.22 1% OFF
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4100-3008
Manufacturer: ABS Import Tools, Inc.
Brand: HHIP
Model: 4100-3008
HHIP 4-digital electronic caliper features four-key Type: hold-key, on/off key, inch/mm key and zero key. Enter high/low dimensional limits-out of limits will Flash on display. Body is hardened stainless steel. 4-Way measurement for outside, inside, depth and step. Thumb roller for moving the slider in small and smooth increments. Hold-key can be used for data hold at any position. Standard SR 44, 1.55V battery included. With fitted case. Meets DIN 862 product specifications: range: 0-8" 0-200mm accuracy: +/-.001"/.02mm.
-
4.0 of 5.0 with 13 Reviews
SALE PRICE: $70.24
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-205-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-205-0
|
Fowler 52-229 series outside Vernier-scale micrometers have a choice of measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop-thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.0001" Thimble style Friction with ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromet...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $71.31 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-439-031-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-439-031-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $72.37
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-235-101-1
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-235-101-1
|
Fowler 52-235 series Vernier-scale micrometers have a choice of measuring range and a 0.256" diameter flat anvil/spindle pair for general purpose measuring operations. The Vernier scale has 0.0001" graduation intervals and 0.0001" accuracy for precise readings. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers for accurate measurements. Metric equivalents inscribed on the frame in black provide quick reference. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The steel frame is tapered for hard-to-reach locations. The micrometer includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeVernier scaleAnvil/spindle styleFlatMeasuring rangeVariesGraduation interval0.0001"Accuracy0.0001"Thimble styleRatchetAnvil/spindle diameter0.256"Flatness0.00003"Parallelism0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called m...
-
4.0 of 5.0 with 47 Reviews
SALE PRICE: $73.98 1% OFF
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Product Features. Accuracy: .001"/.02Mm. Range 6"/150Mm. Stainless Steel Frame. Direct Inch/Metric Measurement. 4-Way Measuring.Accuracy: ¡À0.001, ¡À0.02" mm. Battery Type: 3V CR2032 Lithium. Measuring Range: 0-150, 0-6" mm.
-
4.0 of 5.0 with 9 Reviews
SALE PRICE: $74.32 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-240-004-1
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-240-004-1
|
Range:Â 0-1"Â |Â Resolution:Â 0.0001"Â |Â Part Number:Â 52-240-001-1 Fowler 52-240 series Vernier-scale micrometers have a choice of measuring range and a 0.256" diameter flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" graduation intervals and 0.0001" accuracy for precise and accurate readings. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing long life, and microfine graduations help ensure accurate readings. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. This product has 1 year full warranty offered by Fowler High Precision, an American company. If you experience any problem contact Fowler directly for warranty claims. Â Specifications Display type Vernier scale Anvil/spindle style Flat Measuring range 3-4" Graduation interval 0.0001" Accuracy 0.0001" Thimble style Ratchet Anvil/spindle diameter 0.256" Flatness 0.0003" Â Â Â Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large ro...
-
4.0 of 5.0 with 13 Reviews
SALE PRICE: $74.36
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-203-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-203-0
|
Fowler 52-229 series outside Vernier-scale micrometers have a choice of measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop-thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.0001" Thimble style Friction with ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromet...
-
4.0 of 5.0 with 13 Reviews
SALE PRICE: $74.36
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-203-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-229-203-0
|
Fowler 52-229 series outside Vernier-scale micrometers have a choice of measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop-thimble can be used independent of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.0001" Thimble style Friction with ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00005" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromet...
|
|