LCR Meters - Page 6

Manufacturer: FLIR Systems Brand: Extech Model: LCR203

electronic-components

Brand: Neewer

NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. Specifications: *USB Data transmission *USB Port /PC Data recording: 60000 *Analog bar: 26pcs *LCD backlight *LCR Auto identification measurement *Voltage *L (H):20uH/200uH/20mH/200mH/2000mH/20H/200H2000H/20KH ,?(0.5%+5). *C (F):200pF/2nF/20nF/200nF/2000nF/20uF/200uF/2000uF/20mF, ?(0.5%+5). *R (ohm):20ohm/200ohm/2Kohm/20Kohm/200Kohm/2Mohm/20Mohm/200Mohm, ?(0.3%+5). *Frequency:100Hz/120Hz/1KHz/10KHz/100KHz+ *Voltage:0.6Vrms. NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. Package Contents *1x LCR Meter *1x SMD Test Clip *1x USB Cable *1x CD Software *1x Socket Adapter *1x Short-circuit Plate *1x Carrying Case

Manufacturer: NF Corporation Brand: NF

Manufacturer: AGILENT TECHNOLOGIES Brand: Agilent Technologies

AGILENT TECHNOLOGIES U1731P HANDHELD LCR METER COMBO KIT

Manufacturer: Instek Brand: GW Instek

The LCR-800 Series are high-end digital LCR meters for component/material measurements, applicable to various R&D activities and assembly lines. The large 240 x 128 dot matrix LCD display provides ample room for two measurement items and setup parameters, allowing you to grasp measurement results quickly. All test modes are able to measure supplementary factors, such as, R/Q, C/D, C/R, and L/Q. The LCR-821 also contains precise resistance measurements as a combination of absolute value and phase angle. 100 sets of measurement setup memory allow sharing a single unit among multiple testing conditions or sites. For a better viewing experience in a standard PC monitor, proprietary Windows based software is accessible via the RS-232C terminal. The handler interface is also a standard feature for LCR-826/827/829.

Manufacturer: Icstation Brand: Generic

LCR-T5 digital multi tester support resistor,diode,SCR,capacitor,inductance,MOS transistor testing. 128x64 backlight LCD screen display the meausuring result with fast meauring speed only 2 seconds in most measurement .Built-in rechargeable battery with white ABS case portable enable the user take it out for long time working perfect for sorting your salvaged components or PCB repair. Function: -Boot voltage detection function -Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components, -Automatic test out the components pins then display it on the screen -Test bipolar transistor current amplification factor and emitter junction threshold voltage -Test MOSFET gate threshold voltage and gate capacitance -Built-in rechargeable li-lion battery with USB powr port,ensure long time working -Compact size with ABS case, easy to carry Specification: Working Voltage: DC 9V Display:128X64 LCD Rasistor Testing Range:0.1 ohm - 50M ohm Capacitor Testing Range:25pf-100mF Package included: 1X LCR-T5 Transistor Tester Note:The display language is English.Due to this meter has battery included we will ship it out by Singaport post, it usually take 15-30 days to your home.

Manufacturer: NF Corporation Brand: NF

[Measurement terminals] 4 terminal direct connection type, BNC terminals LCR meter[Measurable sample sizes] Radial lead type devices : 3.5 to 73 mm (measurable conductor diameter is 0.5mm), Measurable conductor diameter: 0.3 to 3.0 mm

Manufacturer: Hioki Brand: Hioki

Hioki 3506 C Hi-Tester (1kHz and 1MHz) C HiTESTERs 3506, 3505, 3504 and 3504-10 measure the C value (electrostatic capacitance) of most types of non-electrolytic capacitors. Models 3506 and 3505 provide high accuracy even when measuring small-value capacitance, and are ideal for small-capacitance internationally-recognized standard measurements requiring 1 kHz, 100 kHz and 1 MHz measurement frequencies. Model 3504 can measure large-capacitance MLCC (multi-layer ceramic capacitors) at their rated voltage, so it is most suitable for 120 Hz and 1 kHz measurements of large-value, non-electrolytic capacitors. All of these C HiTESTERs provide measurements as fast as 2 ms, and comparator and Bin functions for easy integration into automated lines. As an economically priced dedicated tester for integration in automatic systems, Model 3504-10 is the same as the 3504 without the BIN function and GP-IB interface. Enhanced repeat-measurement accuracy The lowest capacitance range of Models 3506 and 3505 is 220 fF* (at 1 MHz), with greatly improved repeatability accuracy for very low-capacitance measurements. * 1 fF (femtofarad) = 10-15F Enhanced absolute accuracy A self-calibration function minimizes variations in measurement values due to changes in ambient temperature. In addition, the cable-length- Capacitance Measurement Repeatability Accuracy × Measuring 1 pF (at 1 MHz, 1 V) compensation function minimizes measurement errors when the measurement cable is extended from 1 to 2 meters (using 1.5D-2V cable) Enhanced contact-checking function Contact errors while measuring can be detected by the Chatter Detection function, Low-C Reject function, Current Detection Circuit Monitoring function and the Applied Voltage Value Monitoring function. Yield rates are improved by judging measurement-object contact errors as ERR instead of FAIL

Manufacturer: GW Instek Brand: GW Instek Model: LCR-8105G

The LCR meter provides accuracy and versatility for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. High resolution and accuracy provide precise measurement results which help reconstruct component characteristics. The Multi-Step function allows customized measurements with Pass/Fail tests all according to a user's requirements. Parameters and limitations are defined separately for each program step. GPIB and RS-232C interface are installed as standard features for controlling the instrument and reading the measurement results. The optional graph mode can display component characteristics in graphs over a wide frequency range or for different driver voltages. Test frequency: 20Hz to 5 MHz, 5 digits, +/-0.005 percent. 100 ohm input impedance. Basic accuracy: +/-0.1 percent (R, Z, X, G, Y, B, L, C). Short circuit current: maximum 20mA. Measurement parameters: Impedance (Z), Phase angle (theta), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality factor (Q), Dissipation factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc). Parallel equivalent circuit only: C + G, B + G, B + D, B + Q, B + R, L + G. Polar form: Z + phase angle, Y + phase angle. LCD Display resolution: 320 x 240 dot-matrix. Power Source, 100 MHz Bandwidth: AC 115V +/-10 percent / 230V +/- 10 (selectable), 50/60Hz. Measures 330mm width by 170mm height by 340mm depth.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 879B Color: Blue

40000 Count handheld LCR meters measures inductance, capacitance, and resistance quickly and precisely. The meters also includes handy functions such as data hold, Minimum/Maximum/Average recording, tolerance sorting, and relative mode. Measurement data can continuously transfer to a PC via the meter's mini USB interface, using either the provided data logging software or SCPI commands sent from a custom program. Fast auto range design for rapid, easy component measurements. USB (Virtual COM) interface. Software for datalogging and front panel emulation available as free download. Selectable auto-power-off options. Applications: Passive component trouble shooting. Electronic assembly. Quality control (component sorting). Measurement parameters: L/C/R/Z/D/Q/Theta/ESR. Test frequency accuracy is 0.02 percent of actual test frequency: 100 Hz, 120 Hz, 1 KHz, 10 kHz (test setting), 100 Hz, 120.048 Hz, 1 kHz, 10 kHz (actual frequency). Tolerance mode: 1 percent, 5 percent, 10 percent, 20 percent. Backlit display: yes Test signal level: almost equal to 0.6 Vrms. Measuring circuit mode: Series mode/Parallel mode. Basic accuracy: 0.5 percent. Ranging mode: Auto. Measuring terminals: 3 terminals with sockets. Measurement rate: 1.5 reading /second (range auto search not included). Response time: almost equal to 680 ms/DUT. Auto power-off: 5, 15, 30, 60 minutes, None. Operation temperature: 32 degree F to 104 degree F; 0-70 percent R.H. Storage temperature: -4 degree F to 122 degree F (-20 to +50 degree C); 0-80 percent R.H. Low battery indication: almost equal to 6.8 V. Battery life: almost equal to 16 hours using Alkaline Battery at 1 kHz with 100 ohm DUT, with backlight off. Power requirements: 1) DC 9V Battery, 2) Ext. DC Adaptor: DC 12 Vmin -15 V Maximum (Load 50 mA Minimum.). Measures 7-1/2" length by 3-1/2" width by 1-19/32" height. 1 year warranty.