Capacitance Meters - Page 2

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KI5210

Capacitive Sensor, M30 X 1.5, Plastic Thread, Sensing Range: 15 Mm, Non-Flush Mountable, 3-Wire, Dc Npn, Operating Voltage: 10...36V Dc, Current Consumption: 15 Ma, Normally Open/Closed Programmable, Cable With Connector, 0.1 M, Pur Cable, Housing Material: Pbt.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KI0206

Capacitive Sensor, M30 X 1.5, Plastic Thread, Sensing Range: 15 Mm, Non-Flush Mountable, 2-Wire, Ac/Dc, Operating Voltage: 20...250V Ac/Dc, Normally Open, Cable With Connector, 0.1 M, Pvc Cable, 2 X 0.5 Mm², Increased Immunity To Conducted Radio Frequency Interference, Housing Material: Pbt.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KI0054

Capacitive Sensor, M30 X 1.5, Plastic Thread, Sensing Range: 20 Mm, Non-Flush Mountable, 2-Wire, Ac/Dc, Operating Voltage: 20...250V Dc/30...250V Ac (47...63 Hz), Normally Open/Closed Programmable, Quick Disconnect, 1/2'' Unf-Connector, Teach Function, Electronic Lock, Housing Material: Housing: Pbt Connector: Pc Buttons: Tpe-U.

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: KG0010

Capacitive Sensors, Capacitive Sensor, M18 X 1, Plastic Thread, Sensing Range: 8 Mm, Non-Flush Mountable, 2-Wire, Ac/Dc, Operating Voltage: 20...250 V Ac/Dc, Normally Closed, Cable, 2 M, Pvc Cable, 2 X 0,34 Mm², Housing Material: Pbt.

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: BAYM Electric Co., Ltd Brand: BAYM Model: BM35SA

5(80)A 120V 60Hz Single phase Two Wire Din rail KWH Watt hour din-rail energy meter LCD KWH 80A BM35SA Application Model BM35SA single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter,it adopt micro-electronics technique,and imported large scale integrate circuit, use advanced technique of digital and SMT techniques,etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21 It can accurate and directly measure 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD displays shows the active energy consumption. It has following features:good reliability,small volume,light weight,specious nice appearance, convenient installation,etc. Functions and features 35mm standard DIN- rail installation,complying with standard DIN EN50022. Bipolar width (Modulus 17.5mm),complying with standard DIN43880 Standard configuration 7+1 digits display (9999999.1kWh) by white backlight source LCD.May select 7+1 digits display (999999.1kWh) without backlight source general LCD Standard configuration pulse output passive (polarity),may select distant pulse output passive ( nonpolarity).And contact with all kind of AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864 Two LED instructions power supply state (green) and signal of energy impulse (red) Automatic detection the direction of the flow of load current. And instructions on LCD (when display HELP 1 on LCD,that is meaning the direction of the flow of load current reverse) Single direction measurement single phase two wire active energy consumption.It is nothing with direction of the flow of load current.Complying with standard IEC 62053-21. Directly type S connection

Manufacturer: CROMPTON Brand: Crompton

1 Nib Crompton 217-01-Vaxxx Tachometer Panel Meter 0-1800Rpm (Rr7-2)

Manufacturer: SODIAL(R) Brand: SODIAL(R) Color: Red + Black

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration. SODIAL(R)Cable Tester Cable Detectors Cable Tracker Network Tester Pipe Locator RJ45 Red+Black Color: Red + Black Packing dimension: approx. 23.5 x 23.5 x 8.5 cm Audio Test and Cable Test: open, short, connector, reverse wiring, cross wiring; Positioning incorrect wiring; Cable length measurement; The measure distance of open circuit and short-circuit. delivery: 1 x main tester 1 x receiver 1 x remote detection device 1 x RJ45 network cable 1 x alligator clips cable 1 x instruction manual 1 x headphones 1 x battery 1 x tool bag Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.

Manufacturer: WILBAC Brand: Wilbac

1 Nib Wilbac 18940 Panel Meter 0-250Vac (X6-1)