|
|
-
3.8 of 5.0 with 48 Reviews
SALE PRICE: $129.95 1% OFF
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 270
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 270
|
The TPI 270 digital clamp meter is an average-sensing, manual- and auto-ranging multimeter for measuring current, voltage, resistance, capacitance, and frequency in electrical testing applications. It has a clamp that measures AC current to 400 amperes). The clamp has two jaws that can close around an electrical conductor up to 35mm (1.37") in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring DC current to 400 microamperes, AC and DC voltage to 600V, resistance to 40 megohms, voltage frequency to 400mHz (megahertz), and capacitance to 40,000 microfarads. The meter comes with a K-type thermocouple probe for measuring temperature to 1,000 degrees F. Its relative function allows a measurement to be set as a reference value, and it displays the subsequent measurements as positive or negative deviations from that value. The peak hold function records the maximum measurement of a current surge. The maximum/minimum function records the highest and lowest readings in a session to track a sudden increase or decrease in readings. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. An audible continuity sensor confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The meter's inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements. A non-contact voltage detector senses voltage without making contact with the circuit. The meter has a rotary switch to select the property to measure, and a 4,000-count LCD that shows readings numerically and in a 41-segment bar graph. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters ...
-
3.8 of 5.0 with 39 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 2040
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 2040
|
The Kyoritsu 2040 digital clamp-meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 600A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC (direct current) voltage to 600V, frequency to 10kHz (kilohertz), and resistance to 60MΩ (megohms). Frequency can also be measured with the clamp. The meter has a rotary switch to select the property to measure, and a 6,039-count LCD that shows the reading numerically and in a 60-segment bar graph.The meter's relative function allows a measurement to be set as a reference value and displays subsequent measurements as a negative or positive deviation from that value. The minimum/maximum function tracks the lowest and highest readings for a property for as long as the function is engaged. To capture readings in tight spaces and aid documentation of readings, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A noncontact voltage (NCV) detector in the jaws senses voltage without making contact with the circuit and triggers a red LED when voltage exceeds 100V. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. The unit operates on two 1.5V AAA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This average-sensing, also called average responding or mean value, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically...
-
3.8 of 5.0 with 8 Reviews
SALE PRICE: $177.00 1% OFF
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: U1193A
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: U1193A
U1190 Series clamp meter fit comfortably in the palm of your hand and allow you to select measurement functions with thumb press. The unique wire separator allows you to effortlessly isolate and perform measurements on individual wires in a bundle. For improved visibility when making measurements, these clamp meters come with integrated LED flashlight that illuminates the test area. These features ensure that you are better equipped when making measurements. METCAL procedures for the product is available at Cal Lab Solutions, a third-party independent vendor.
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $180.79
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TRM50
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TRM50
Price for: Each 1 . Accessory Type:BNC Feedthrough Terminator.For Use With:Fluke 190 Series Scope Meters.SVHC:No SVHC (16-Dec-2013)
-
3.8 of 5.0 with 21 Reviews
SALE PRICE: $197.55 1% OFF
Manufacturer: CIRCUIT-TEST
Brand: CIRCUIT-TEST
Model: DCL-320
Manufacturer: CIRCUIT-TEST
Brand: CIRCUIT-TEST
Model: DCL-320
Digital Clamp Ons for the electrical industry. A maximum wire size of 46mm (1.8") diameter can be measured within the clamp jaws. Same as the DCL-310 with True RMS and Backlit.
-
3.8 of 5.0 with 36 Reviews
SALE PRICE: $197.92
Manufacturer: Extech Instruments
Brand: Extech
Model: EX720-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: EX720-NIST
AC Current Clamp Meter that features measurement of AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Type K Temperature, Diode and Continuity. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $197.99 1% OFF
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $199.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-B
Color: Blue
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS410-B
Color: Blue
10:1 attenuation value. 300 MHz bandwidth. CAT III 1000V, CAT IV 600V voltage. Lead free / RoHS Compliant. 1M Input resistance. Includes ground leads with clips, hook clips, test probes. For 190 Series II ScopeMeter test tool. Blue color.
-
3.8 of 5.0 with 18 Reviews
SALE PRICE: $244.99 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: EX730-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: EX730-NIST
True RMS AC/DC Current Clamp Meter that features measurement of AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Type K Temperature, Diode and Continuity. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
3.8 of 5.0 with 22 Reviews
SALE PRICE: $259.99 1% OFF
Manufacturer: MESTEK
Brand: Pretek
Manufacturer: MESTEK
Brand: Pretek
Features: * 6000 counts Display. * Data Hold. * Display Backlight. * Work light. * Auto power off. Specifications: * DC Voltage: 6V/ 60V/ 600V±(1.0%+3). * AC Voltage: 6V/ 60V/ 600V±(1.2%+3).* AC Current: 30A/300A/3000A±(3.0%+5). * Resistance: 6kΩ/60kΩ/600kΩ/6MΩ±(1.0%+3). * Frequency: 20Hz - 1000Hz±(1.0%+2).
|
|