Clamp Meters - Page 47

Manufacturer: Greenlee Brand: Greenlee Model: CM-1360

Includes Clamp Meter (2) 1.5V AA Batteries Test leads Carrying case Features Measures AC current AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance and frequency Tests continuity and diodes Flashlight inside clamp jaw for easier work in dark locations Backlight increases accuracy on small wires and low current Two voltage detection modes noncontact or using a single test lead Data hold Recording of Maximum, Minimum and Average readings Lifetime Limited Warranty

Manufacturer: Greenlee Brand: Greenlee Model: CMI-600

Includes Clamp Meter (2) 1.5V AAA Batteries Test leads and clips Carrying case Features Measures AC+DC current and DC microamps AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance, temperature and frequency Tests continuity and diodes Phase Sequence increases accuracy on small wires and low current Two voltage detection modes noncontact or using a single test lead Data hold Recording of Maximum, Minimum and Average readings Lifetime Limited Warranty

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-71X-TRAP

FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR

Manufacturer: Greenlee Brand: Greenlee Model: CM-860-C

Includes Clamp Meter (2) 1.5V AAA Batteries Test leads Certificate of Calibration Carrying case Features Measures AC current AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance and frequency Tests continuity and diodes Backlight increases accuracy on small wires and low current Two voltage detection modes non-contact or using a single test lead Data hold Recording of Maximum, Minimum and Average readings Lifetime Limited Warranty

Manufacturer: Fluke Corporation Brand: Fluke Model: 847793

Digital multimeter replacement fuse. 600V Voltage. 15A Current.

Manufacturer: FIXKIT Brand: FIXKIT

Specification Max. Display: 6000 DC Voltage: 600mV/6V/60V/600V±(0.7% +2) AC Voltage: 6V/60V/600V±(0.8% +3) DC Current: 60A/600A ±(3% +6) AC Current: 60A/600A ±(3% +6) Resistance: 600/6k/60k/600k/6M±(0.8% +3) 60M±(1.2% +3) Capacitance Accuracy: 40nF/400nF/4000nF/40µF/400µF/4000µF±(4.0% +5) Frequency Accuracy: 0~60MHz±(1.5% +5) Transistor Test: No Temperature Test: Yes Frequency Test: Yes Power Consumption Test: No Short-Circuit Protection: Yes Short Curcuit Buzz: Yes Features Auto measuring range LCD display Full range overload protection Measure AC DC Current,Voltage, Resistance, Frequency, Capacitance, Duty ratio, Diodes, circuit connections, non-contact voltages and temperatures. Reading Hold Frequency/Duty Ratio Switch Maximum/Minimum Measurement Choice Function Switch REL Measurement Clamp head frequency measurement Low battery indicator Back light and clamp head light Auto power-off Package Contents 1 × AC/DC Clamp Meter 1 × Probe (Level:1000V 10A) 1 × Battery (6F22 9VOLTS) 1 x User Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: 3511872

The Fluke TI-TRIPOD tripod mounting base is a one-piece mounting accessory that attaches to Fluke thermal imagers for mounting on a tripod or monopod. It provides stability for Fluke Ti32, Ti29, Ti27, Ti25, Ti10, Ti9, TiR32, TiR29, TiR27, and TiS thermal imagers (sold separately). It is constructed of plastic with a metal insert for durability.Thermal imagers, also known as thermal cameras, infrared imagers, or infrared cameras, capture images of heat patterns for examination and analysis. Objects emit infrared light, and this light radiates heat in varying temperatures. A sensor within a thermal imager detects radiant heat and transforms it into patterns on a thermal imaging system. Thermal imagers have LCD screens to display an image of the object in a range of color that corresponds with variations in temperature. Technicians can transfer images and video to a computer for process monitoring and analysis. Some thermal imagers can show visual images along with thermal images to make an object more identifiable. Thermal imagers are used in an array of industries, including construction and building maintenance, manufacturing, firefighting, medicine, law enforcement, and military among others. A wide range of applications include building diagnostics to identify hidden moisture or heat leaks, industrial and commercial maintenance to prevent or identify electrical or mechanical equipment failure, thermal cameras that restore visibility in fire control, medical and veterinary diagnostic imaging to identify health conditions, and surveillance cameras for law enforcement and facility security.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Extech Instruments Brand: Extech Model: EX820 Color: Multicolor

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer Compact and powerful, the EX820 1000-Amp True RMS AC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. The EX820 measures AC/DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also includes a built-in, non-contact infrared thermometer for detecting invisible hotspots, Type K bead wire temperature probe, and True RMS to ensure accurate measurements without distortion from electronic devices. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation.1000A True RMS AC Clamp Meter with IR ThermometerAt a Glance:Provides multiple, accurate electrical measurementsBuilt-in, non-contact infrared thermometer detects invisible hot spotsTrue RMS capability corrects for distortion from electronic devicesLarge LCD screen with backlit display for clear viewingDurable, ergonomic design for easy one-handed operationOne-year limited warranty on parts and laborEX820 clamp-on multimeter with built-in InfraRed Thermometer is ideal for industrial applications. View larger.Multipurpose Meter in One Convenient DeviceThe Extech EX820 offers multiple functions so service technicians can carry one meter into the field instead of several. The EX820 will measure AC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity. Its wide-opening, 1-7/10-inch circular jaw fits around conductors up to 750 MCM, or two 500 MCM. This Extech also features min/max, data, and peak hold of c...

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-400 Color: Multicolored

The Amprobe ACDC-400 TRMS digital clamp meter is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures alternating current (AC) and direct current (DC) to 400 amp. The meter comes with detachable test leads that measure AC voltage and DC voltage to 600 volts (V), and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.1" (27 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. It has a liquid crystal display (LCD) that shows readings both in digits and on a bar graph. The LCD is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and automatically selects select the correct operating range for the property being measured. It can be switched to manua...

Manufacturer: ETCR Brand: ETCR

Technical Specifications: Measurement Range:0mA-60.0A AC/DC Resolution:1mA AC/DC Accuracy:±2%rdg±5dgt (23℃±5℃, below 75%rh) Test Mode:Clip-on CT, integral mode Clamp Size:Φ7mm Display Mode:4 digits LCD display LCD Dimension:35mm×21.5mm; display domain: 32mm×15mm Sampling Rate:2 times/s Frequency:AC: 45Hz-400Hz Polarity Indication:DC current auto identified and display"-" Test Position:Tested wire in the jaw center Range Shift:Automatically Line Voltage:AC600V RS232 Interface:Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate:9600, data bit:8, stop bit:1 Data Memory:99units, FULL blinks when the memory is full Reading Hold:DH indicating the reading is hold Out of Range:OL indicating the current is out of range Auto Power-off:5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage:Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current:10mA Consumption:10mW Working Temperature and Humidity:-10℃-50℃,below 80%rh Limit Temperature Error:-10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity:-10℃-60℃,below 70%rh Insulating Strength:AC2kV/rms (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)