Clamp Meters - Page 48

Manufacturer: Hioki Brand: Hioki Model: 3282

The Hioki 3282 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 46mm (1.81 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 600V, frequency to 1,000Hz (hertz), and resistance to 10kΩ (kilohms). The meter has a rotary switch to select the property to measure, and a 3,000-count LCD that shows the reading numerically and in a 35-segment bar graph. The crest factor function uses a 1.00 to 5.00 scale to measure the quality of an AC signal and its ability to generate a particular voltage or current. The record function displays the maximum, minimum, and average readings for a property after the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on a single 9V 6F22 battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets EN (European Standard) safety standard 61010, and is rated for CAT (category) IV installations up to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment. It has CE (Europea...

Manufacturer: Hioki Brand: Hioki Model: 9657-10

Measurable conductor diameter: 40mm. Primary current rating: AC 10A. Output voltage: AC 100mV/A. Amplitude accuracy (45 to 66 Hz): +/-1.0 percentrdg.+/-0.05 percent f.s. Phase accuracy (50/60Hz): within +/-3 degree . Residual current: 5mA (100A on forward and return). Frequency characteristic (accuracy deviation): within +/-3 percent at 40Hz to 5kHz. Maximum rated voltage to earth: 300Vrms (insulated conductor). Maximum allowable input: 30A continuous. Measures: 74mm width by 145mm height by 42mm depth.

Manufacturer: Extech Instruments Brand: Extech Instruments Model: EX830

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Peak hold captures inrush currents and transients, and models 26834-22, -24 include true RMS and a type K thermometer probe. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer Compact and powerful, the Extech EX830 1000-Amp True RMS AC/DC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. The EX830 measures AC/DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also includes a built-in infrared thermometer for detecting invisible hotspots, a DC Zero function, a Type K bead wire temperature probe, and True RMS to ensure accurate measurements without distortion from electronic devices. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation.1000A True RMS AC/DC Clamp Meter with IR ThermometerAt a Glance:Accurately reads electrical measurements, including DC currentBuilt-in, non-contact infrared thermometer detects invisible hot spotsType K bead wire probe for measuring temperatureLarge LCD screen with backlit display for clear viewingDurable, ergonomic design for easy one-handed operationThree-year limited warranty on parts and laborEX830 clamp-on multimeter with built-in InfraRed Thermometer is ideal for industrial applications. View larger.Multipurpose Meter in One Convenient DeviceThe Extech EX830 offers multiple functions so service technicians can carry only one meter into the field instead of several. The EX830 will measure both AC and DC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV200

' Infrared Window, Crystal Insert Size 50mm dia., Viewing Aperture Size 45mm dia., Window Thickness 2mm, NEMA Rating 4, 12, IP Rating 67, Gasket Maximum Temperature 232 Degrees C (450 Degrees F), Body Maximum Temperature 232 Degrees C (450 Degrees F), Optic Maximum Temperature 232 Degrees C (450 Degrees F), Voltage Range Any, Components CV200, ClirVu(R) Infrared Window, Body Material Zinc/Aluminum Alloy, Includes Hand Turn Door, Manufacturers Warranty Length Limited Lifetime '

Manufacturer: ETCR Brand: ETCR Model: ETCR2100+

The lead time is about 2-3 business days; FedEx/DHL delivery time is about 5-7 days. Specificaiton: •Function:Ground resistance test, Loop resistance test •Power Supply:6VDC 4 PCS of AA Alkaline batteries •Resistance Range:0.01-1200Ω •Resistance Resolution:0.001Ω •Highest Resistance Accuracy:±1%±0.01Ω •Data memory:99 Sets •Alarm Threshold Setting Range:Resistance: 1-199Ω •Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. •Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking •Working Temperature and Humidity:-20℃-55℃；20％RH-90％RH •LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm •Clamp Size:Φ32mm •Clamp Opening Extent:32mm •Tester Weight:1160g (With batteries) •Clamp Dimension:L×W×T: 285mm×85mm×56mm •Protection Level:Dual Insulation •Structural Feature:Clamp CT •Shifting:Automatic shifting •External magnetic field:＜40A/m •External electrical field:＜1V/m •Single measurement time:0.5 second •Resistance measurement frequency:＞1KHz •Measured current frequency:50/60Hz Automatic measurement •Low Battery Indication:Low battery symbol displays when battery is lower then 5.3V •Memory Full Indication:MEM symbol blinks when all 99 sets memory is full •Over Range Indication:Out of range indication "OLΩ", "L0.01" or "OL A" •Auto Power-off:Auto Power-off •Power Consumption:Max 50mA either in booting up or normally working, Continuously working for 30 hours

Manufacturer: Greenlee Textron Brand: Greenlee Model: CM-1560

Greenlee AC True rms clamp meter is designed to measure AC currents, DC voltages, resistance and frequency. It includes digital low pass filter for precise readings on variable frequency drives. Clamp meter easily tests continuity and diodes. It can record average, maximum/minimum readings. Clamp meter comes with two voltage detection modes that is non-contact or single test lead. It has a two 1.5V AAA batteries, test leads and case for comfortable carrying. Clamp meter has AmpTip that provides increased accuracy on small wires carrying low currents. It gives precise measurements of the current up to 60600 Amps. Clamp meter has a 6000 count LCD display. It has a 1.18-Inch jaw opening. Clamp meter offers accurate measurements of voltage rating up to 600 VAC/DC. It easily holds data and gives exact measurements on the resistance range of 600, 6/60k Ohm. It offers correct measurements of frequency rating for voltage/AmpTip currents at 50/60 Hz and higher currents at 50 - 400 Hz. Clamp meter is UL listed.

Manufacturer: Extech Brand: Extech Model: EX840 Color: Multicolor

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Peak hold captures inrush currents and transients, and models 26834-22, -24 include true RMS and a type K thermometer probe. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: EX850

The EX850 is a 1000A True RMS AC/DC Clamp Meter with Bluetooth, capable of transmitting key electrical readings to android mobile devices. The EX850 measures AC/DC current and voltage, resistance, capacitance, frequency, IR temperature and continuity. This clamp meter has a 1.7" jaw opening for conductors up to 750MCM or two 500MCM. The EX850 also has a 4000 count backlit LCD display, auto ranging and manual ranging button, as well as; data hold, minimum, maximum and auto power off functions. This product has a CAT IV 600V safety rating and comes with CAT IV test leads, 9V battery, general purpose Type K probe; user's manual and pouch case.

Manufacturer: Fluke Brand: Fluke Model: 4636971

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Fluke Corporation Brand: Fluke Model: BE9005 120

7.5V DC battery eliminator for operation of calibrator from 120 volt ac line. UL/CSA recognized. Application: for use in North America; 120V AC 60 Hz lines. Measures 3-51/64" width by 2-1/2" height by 2-25/128" depth. One year warranty.