Clamp Meters - Page 45

Manufacturer: ETCR Brand: ETCR

Technical Specification: Measurement Range:0mA~60.0A AC/DC Resolution:1mA AC/DC Accuracy:±2%rdg±5dgt (23℃±5℃, below 75%rh) Test Mode:Clip-on CT, noncontact measurement Clamp Size:25mmX35mm Display Mode:4 digits LCD display LCD Dimension:35mm×21.5mm; display domain: 32mm×15mm Sampling Rate:2 times/s Frequency:AC: 45Hz-400Hz Polarity Indication:DC current auto identified and display"-" Test Position:Tested wire in the jaw center Range Shift:Automatically Line Voltage:Do not exceed AC 600V RS232 Interface:Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate:9600, data bit:8, stop bit:1, check bit: NONE Data Memory:99 units, FULL blinks when the memory is full Reading Hold:DH indicating the reading is hold Out of Range:OL indicating the current is out of range Auto Power-off:5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage:Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed. Working Current:10mA Humiture:-10℃-50℃,below 80%rh Limit Temperature Error:-10℃-0℃ and 40℃-50℃, within 2%rdg Humiture Storage:-10℃-60℃,below 70%rh Insulating Strength:AC 3700V/rms. (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, pollution:2, CAT Ⅲ(600V)

Manufacturer: Fluke Corporation Brand: Fluke Model: 2648411

Fluke vehicle battery adapter/charger for IR FlexCam thermal imager.

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-CM271 2000A AC/DC Digital Clamp Meter Designed to Provide Many Functions for AC/DC Measurements Including Resistance, Capacitance, and Diode Test, etc. with Mid-Size and Tear-Drop Shaped Jaw, It is Easy to Use in Crowded Cable Areas and Other Tight Places. Safety Standard: IEC/EN 61010-1 CAT III 600V. /IEC/EN61010-2-032 / EN 61326-1

Manufacturer: Klein Tools Brand: Klein

600A AC/DC True RMS Clamp Meter Product Features True RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle Tests non-contact voltage, diodes, and continuity Backlit display and worklight Magnetic mount and lead storage Non-Contact Voltage Tester Analog bar graph.Specifications Height: 7.65" (194mm)Width: 2.56" (65mm)Weight (oz.): 11.9oz (337.36g)Batteries: 2 x AAAJaw Size: 1.25" (32mm)Included Accessories: test leads, batteries, case Ingress Protection: IP42Safety Rating: CAT III 600V

Manufacturer: AKTAKOM Brand: AKTAKOM Color: Blue

AKTAKOM ACM-2353 Professional True RMS 1000A AC Watt Clamp Meter provides accurate Watt, AC Current and Voltage readings regardless of waveforms. .

Manufacturer: AEMC Brand: AEMC Model: 401

The AEMC 401 digital clamp-meter with temperature probe is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 48mm (1.89 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads, which are silicone-insulated for flexibility and resistance to heat and cold, is included for measuring AC and DC voltage to 1,000V, frequency to 20kHz (kilohertz), and resistance to 100kΩ (kilohms). Frequency can also be measured with the clamp. The meter comes with a K-type thermocouple probe that measures temperatures from -60 to +1,000 degrees C (-76 to +1,832 degrees F).The meter has a rotary switch to select the property to measure, and a 10,000-count LCD with a backlight for visibility in low light that turns off automatically after two minutes. The inrush current function, with a selectable sampling time of 1ms (millisecond) or 100ms, analyzes surge current at startup and due to load increases in installations that are up and running. The maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on four AA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatica...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-63TCAL

The Fluke 63 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -32 to +535 degrees C (-25 to +999 degrees F) with accuracy that varies from + or - 1 degree C to + or - 3 degrees C depending on the temperature range. It has a 12:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It can display the current temperature and the maximum temperature for comparison during process monitoring. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The CE mark indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-32 to +535 degrees C (-25 to +999 degrees F)Infrared sensor accuracy-32 to -26 degrees C (-25 to -15 degrees F): + or - 3 degrees C (+ or - 5 degrees F); -26 to -18 degrees C (-15 to 0 degrees F): + or - 2.5 degrees C (+ or - 4 degrees F); -18 to +23 degrees C (-0 to 73 degrees F): + or - 2 degrees C (+ or - 3 degrees F); For targets above 23 degrees C (73 degrees F): + or - 1% of reading or + or - 1 degrees C (+ or - 2 degrees F), whichever is greaterDisplay resolution2 degrees C / 5 degrees FDistance-to-spot ratio12:1Power Supply9V or NiCd batteryWeight320g/11oz.Dimensions200 x 55 x 160mm / 8 x 2 x 6 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focus...

Manufacturer: FLIR Systems Brand: Extech Model: MA410T

400A AC True RMS Clamp Meter + NCV The Extech MA410T is a 400 amp True RMS AC clamp meter capable of safely and efficiently measuring current without test leads. True RMS provides truer AC readings when measuring distorted waveforms. The integrated NCV detector enables users to quickly check for the presence of live wires before testing. Applications Electrical troubleshooting Mechanical diagnosticsHVAC installs/repairField techniciansUtility service crewsPlant and predictive maintenanceQA/QC and R&D bench testing Features Overview Digital multimeter functions on the MA410T include: AC/DC voltage (600 volts); resistance (40 MΩ); capacitance (100 µF); frequency (10 kHz); temperature (-4 to 1400 degrees F/-20 to 760 degrees C); duty cycle; diode; and continuity. The MA410T also provides a 1.2-inch (30mm) jaw opening size for conductors up to 350 MCM; 4000 count backlit display; and data hold; relative mode; and auto power off functions. What's in the Box Comes with test leads, general purpose Type K bead wire temperature probe, two AAA batteries, carrying case, and user manual. Basic Clamp Meter Information A clamp meter is a safe, convenient, and efficient way to measure current without having to use test leads. A clamp meter measures AC or DC current by clamping around a single conductor and displaying the results digitally. The area of the meter that clamps onto the conductor is known as the "jaw" and is opened by the user with a press of a button. Since current flow through a conductor causes a magnetic field, the clamp meter can sense this field and provide a corresponding current reading (in amperes or amps). Clamp meters do not interrupt current flow, which enables used to take electrical measurement quickly and safely. Clamp meters often have digital multimeter functions built in such as voltage and resistance. Dials or switches on the meter allow the user to select the range and other modes of operation. Display icons convey the unit of measure, range, resolution and other useful information. ...

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: Fluke Corporation Brand: Fluke Model: PT12

Pitot tube for 922 airflow meter. Pressure sensitive to aid in measurement and data gathering. 12" Length.