Current Testers - Page 47

Manufacturer: Vetus Brand: ETCR Model: ETCR6200

It could be widely use in those fields as car repair, car leave factory test, car parts test, the current detection in telecommunication room, electric power overhauling, meteorology, oil detection, etc. Technical Specifications Function: Measurement of AC/DC current, leakage current, repairing the car circuit.  Power Supply: Zn-Mn dry battery,6F22,9V, continuous use for 30h Test Mode: Clip-on CT, non-contact measurement Clamp Size: 25mmX35mm Measurement Range: 0mA-60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%rh) Display Mode: Four digits LCD display Sampling Rate: 2 times/s Frequency: AC: 45Hz-400Hz Polarity Indication: DC current auto identified and display"-" Test Position: Tested wire in the jaw center Line Voltage: AC600V RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC Com-Configure:Baud rate: 9600, data bit:8, stop bit:1 Data Memory: 99units, FULL blinks when the memory is full Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current: 10mA Consumption: 10mW Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC 3700V/rms. (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Vetus Brand: ETCR

Technical Specifications Function: DC leakage current measurement, DC current measurement,Automobile leakage maintenance Power Supply: 6F22,9V Process Type: Clamp CT Display Type: 4 Digits LCD Clamp Size: 25mm×30mm Meter Dimension: LWH: 175mm×70mm×38mm LCD Dimension: 35mm×21.5mm; Display Dimension: 32mm×15mm Sampling Rate: 2 Times/Second Shifting: Automatic Shift Range:0.0mA～6.00A DC Resolution: 0.1mA DC Accuracy ( 23°C±3°C, below 70%RH): 0.0mA~300.0mA DC: ±2%rdg±5dgt; 0.30A~6.00A DC: ±2%rdg±5dg tLine voltage: Below 600V DC USB interface: With USB interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory: 99 sets, "FULL" Blinking when memory is full Peak Maintaining: Peak value capture hold function, press HOLD without Release to display peak value Reading Hold: Reading hold function: "DH" symbol display Overflow display: Range overflow function: "OL" symbol display Automatic Shutdown: 5 minutes after the boot,auto shutdown to reduce battery consumption Battery Detection: When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Working Temperature and Humidity: -10℃～50℃; below 80%rh Limit Temperature Error: -10℃～0℃ and 40℃～50℃,Maximum error increase 2%rdg Storage Temperature and Humidity: -10℃~60℃; below 80%rh Insulation Strength: AC3700V/rms (between core and box) Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) Accessories: Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece; bag 1 piece

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-BASIC

FlukeView Forms Basic can be used alone to download measurement data and create reports that can be saved and printed. FlukeView Forms comes with an array of standard analysis and reporting forms that get you started on displaying your data in tables, graphs or helpful diagrams. You can leave notes on the forms to draw attention to a particular event. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. To address the increasing demands for reporting and documentation. It increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Owners of Fluke 280 series, 180 series, 789 and 1550B, who do not need the full power of FlukeView forms, can use FlukeView Basic version. Transfer data points from your meter to your PC and use the two standard, non-customizable forms to display your readings in table or graphical form. For a larger array of forms or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.3 with FVF-UG (sold separately). Comes with USB/IR cable. Number of standard forms: 2. Number of multiple meters whose data can be viewed simultaneously: 1. Number of concurrently running instances of FlukeView Forms allowed: 1. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install), USB port. FlukeView Forms supports the following test tools: 280 Series, 789, 1550B, 1653, 180 Series. Size: 203 x 100 x 50mm.

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks TEST JACK VIO

Manufacturer: Cooper Bussmann Brand: Cooper Bussmann Model: LPJ-400SP

Bussmann ABC-1/10-R Buss Small Dimension Fuse. Cooper Bussmann.

Manufacturer: Amprobe Brand: Amprobe Model: 37XR-A Color: Multicolored

Digital multimeter measures alternating current (AC) and direct current (DC) to 10 amp, Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations and category III installations.

Manufacturer: Amprobe Brand: Amprobe Model: 38XR-A

The Amprobe 38XR-A is a true rms auto-ranging handheld digital multimeter for engineers designing and troubleshooting industrial automation and control systems. It can measure and test the following: DC and AC voltage; DC and AC current; resistance; frequency; duty-cycle; temperature; capacitance; diodes; continuity; dBm and 4-20 mA loop current. The 38XR-A includes: one set of test leads with alligator clips, a user manual, a Magne-Grip Holster, a clip, magnet and strap, a temperature adapter, a K-Type Thermocouple, a 9 volt battery (installed) and a spare mA fuse 0.5A/100V. The 38XR-A TRMS digital multimeter has a port for connecting the meter to a computer (software and cable not included). The meter comes with a K-type thermocouple probe for measuring temperature. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings, and the average function displays the average of the recorded maximum or minimum values. The peak + or - function records peak positive or negative values for AC current and AC voltage. The display is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. Amprobe began life in Long Island, NY in the late 1940's under the name Pyramid Instrument Company. In 1960 the company name was formally changed to Amprobe Instrument Corporation. Amprobe continued to design, engineer, manufacture and distribute product from its Lynbrook, NY location until it was merged to form ATP and relocated to South Florida in late 1999.

Manufacturer: PAI Industry Brand: PAI Industry

Assembly Housing EPB3352

Manufacturer: PAI Industry Brand: PAI Industry

Kit Manifold EOM8598

Manufacturer: TED Brand: The Energy Detective Model: MTU/CT add-on

Add on kit to any TED Pro Commercial package. This set includes one Measuring Transmitting Unit (MTU) and 3 Current Transformers (CTs). Designed to monitor an additional main breaker panel, subpanel, or wind/solar installation up to 400 amps.