Current Testers - Page 82

Manufacturer: Sperry Instruments Brand: Sperry Instruments

623-DSA1010 Features: -Functions: 8. -Ranges: 23. -Amps: 600.00A AC/DC [Max], 1000.00A AC/DC [Max]. -Voltage Type: AC/DC. Product Type: -Meters. Generic Specifications: -Voltage: 6.00 VAC [Min], 600.00 mVDC [Min], 600.00 VAC [Max], 600.00 VDC [Max]. -Frequency: 10.0 Hz [Min], 10.0 kHz [Max]. Dimensions: Overall Length - Side to Side: -6.9 Inches. Overall Height - Top to Bottom: -12.5 Inches. Overall Depth - Front to Back: -2 Inches. Overall Product Weight: -1.19 Pounds.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-3300 IND

The Amprobe ACD-3300 digital clamp meter with included temperature probe is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage to 1,000 volts (V), AC voltage to 750V, capacitance to 6.6 millifarads, resistance to 66 megaohms, frequency to 1 megahertz (MHz), and duty cycle up to 95%. The clamp has two jaws that can close around a conductor up to 2" (57 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The peak + or - function records peak positive or negative values for AC current and AC voltage. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. It has a liquid crystal display (LCD) that shows readings both in digits and on a 66-segment bar graph. The LCD is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinuso...

Manufacturer: Extech Brand: Extech Model: MA640-K

Phase rotation/Clamp kit Includes - MA640 clamp meter, three-phase rotation tester, DV25 AC voltage detector, test leads, type-K therm bead probe and adapter Non-Contact voltage detector allows quick check for live wires before testing Built-in non-contact Voltage detector with LED alert. 1.5" (40mm) jaw size for conductors up to 500MCM. 6000 count, backlit LCD display. Multimeter functions include AC current, AC/DC voltage, resistance, capacitance, frequency, temperature, duty cycle, diode, and continuity. Model MA640 measures DC current. Relative mode for capacitance zero and offset adjustment. Data hold and min/max. Auto power off

Manufacturer: Extech Brand: Extech Model: EX622 Color: Multicolor

What's Included: CAT III-600V, double molded test leads, 9V battery, two Type K bead wire probes (-4 to 482degF/-20 to 250degC), and case. Built-in dual thermocouple inputs for additional flexibility Clamp Meters Feature: True RMS measurements for accurate AC Voltage and Current measurements Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2) Built-in non-contact Voltage detector with LED alert DC ìA multimeter function for HVAC flame rod Current measurements Data Hold plus fast Peak Hold of current surges during motor startup 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges Measures motor capacitors to 40,000ìF 1.4" (36mm) jaw opening for conductors up to 500MCM Rugged double molded housing Auto power off with audible alert and disable function Autoranging with manual override EX622 and EX623 Additional Features: Built-in non-contact Thanks to its multiple functions, the Extech EX622 400-Amp Dual Input AC Clamp Meter provides you with the convenience of five meters in one. The EX622 features a built-in non-contact infrared thermometer, dual Type K bead wire temperature probes, and a built-in non-contact voltage detector. In addition to measuring AC current and AC/DC voltage, it also captures capacitance, diode, and frequency readings. The ergonomically designed housing has a comfortable grip for one-handed operation, and its high-resolution LCD screen offers an easy-to-read view. True RMS ensures accurate AC voltage and current measurements without distortion from electronic devices.400A Dual Input AC Clamp Meter + NCV + IR ThermometerAt a Glance:Provides accurate basic and advanced measurementsTrue RMS capability corrects for distortion from electronic devicesNon-contact infrared thermometer shows invisible hot spotsHigh-resolution LCD screen for clear viewingDual Type K bead wire temperature probes with differential temperature functionOne-year limited warranty on parts and laborErgonomic desig...

Manufacturer: Hioki Brand: Hioki Model: 3293-50

The Hioki 3293-50 digital clamp-meter is a true RMS sensing, auto-ranging meter for measuring a wide range of current, from leakage to load, and frequency in electrical testing applications. It has a clamp that measures AC (alternating current) from 1mA (milliampere) to 1,000A and frequency to 400Hz (hertz). The clamp has two jaws that can close around an electrical conductor up to 24mm (0.94 inches) in diameter to measure current without touching or interrupting the circuit. Each jaw can be opened can closed independently of the other and is 11mm (0.43 inches) thick to fit between narrowly spaced conductors. The meter powers on when the jaws are opened, has a 6,000-count LCD that shows the reading numerically and in a 91-segment bar graph, and has a backlight for visibility in low light that turns off automatically after 15 seconds. The display can be flipped open and adjusted to a convenient viewing angle. The meter features a low-pass filter that reduces high-frequency interference to allow accurate measurements of leakage current and complex wave shapes. The maximum value function shows the highest displayed reading. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on a single CR2032 battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standard 61010 and is rated for CAT (category) III installations to 300V, which covers equipment in fixed installations, such as switches in t...

Manufacturer: Fluke Corporation Brand: Fluke Model: 2839604

Fluke universal battery eliminator for 345 power quality clamp meter.

Manufacturer: Hioki Brand: Hioki Model: 9691

Rated current: AC/DC 100 A. Output voltage: AC/DC 1 V/100 A. Maximum peak current value: 150 A. 3 Years warranty.

Manufacturer: Fisher Labs Brand: Fisher Labs

Coupling Clamp 3" (82kHz only)

Manufacturer: Vastar Brand: Vastar

Digital Clamp Meter makes home electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can easil extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic clamp for safer handling when measuring. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses. Test fuses, appliance power consumption, and outlets with auto ranging freedom. Test voltage, resistance, diode, and continuity with a single flip of the rotary switch. The eliminates guesswork and shortens the steps to get the job done. Measure the max output for any testable source with a press of a button. When you get the number you need, press the hold button to lock the reading on the LCD display for your convenience. The device includes a lightweight portable carry pouch for convenient storage and handling. With a max capacity of 600V and auto ranging convenience, it can help to get the job done easier, safer, and faster. Features: LCD screen size:36x19mm Max Display value:1999 Auto ranging: yes Low battery indication: displayed Over-range indication: displayed Diode test: yes Continuity test and buzzer sound: yes Data-hold: yes Jar opening diameter:?25mm Battery type:1.5Vx2, AAA size Dimension(H*W*D):213x52x31mm Weight: approx 190g(battery not included) Package included: 10 x Vastar Digital Clamp Meter 20 x Test Lead 10 x Temperature Probe 20 x Batteries 10 x User Manual 10 x Black Bag Warranty: 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24 hours.

Manufacturer: Klein - Geneva Supply Brand: Klein Tools Model: CL2300

This Klein meter features true RMS, auto-ranging meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and temperature. It is also designed to test non-contact voltage, diodes, and continuity.