Current Testers - Page 90

Manufacturer: PAI Industry Brand: PAI Industry

Spacer - .257 Inch Think BSP1061257

Manufacturer: uxcell Brand: uxcell Model: a11051300ux0042

The Shunt is used to multiply the measuring range of current of measuring. Could be used either in a Digital or an Analog meter. Good quality, good performance and easily installation.

Manufacturer: Yokogawa Brand: Yokogawa

Yokogawa Model 251-100 KmKm Panel Meter

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX C3002

The CNX C3002 Modular DMM 2-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case can work alone, holding the CNX Wireless Multimeter and test leads, or can be attached to the CNX C3000 Premium Modular Tool Bag. Your CNX tools are always within easy reach, ready for testing.

Manufacturer: Hardline Products Brand: Hardline Products Model: HR-8065 Color: Black

Track the service life of all non-engine applications with this vibration hour meter from Hardline Products, which helps you keep up with a successful preventative maintenance program for bearings, chassis lubrication, and more on powersports trailers and other equipment without engines. Vibration automatically activates recording. Easy to install, just peel and stick -- no wiring necessary. The meter has a 10-year battery sealed inside, and it records up to 9,999.9 hours. The unit measures 2-1/8 x 1-1/2 x 5/8 inches. Hardline Products is an industry leader in after-market power sports accessories, offering matched registration letter and number kits, decal application and removal fluid, and more for on- and off-road motorcycles, boating, personal watercraft, all terrain vehicles (ATVs), snowmobiles, and karting. Made in the USA.

Manufacturer: ELIKE Brand: ELIKE Model: 3266TD Color: Iron-gray and Orange

Nanjing ELIKE Meter specializes in developing and manufacturing digital clamp meter ,analog meter, battery tester and insulation resistance tester etc. 3266TD is a compact and auto-ranging clamp meter with a large 4-digit screen. It measures AC current to 600 amp, AC and DC voltage to 600V, and resistance to 40M,frequency and capacitor.It is ideally suited for current measurements in tight cable compartments.The K-type probe can test temperature.Audible continuity function confirms that the circuit conducts electricity,and a diode test detects whether a circuit's diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. A low-battery indicator signals when the meter's batteries need to be replaced. Specifications: AC Current: 400A/600A AC Voltage: 400mV/4V/40V/400V/600V DC Voltage: 200mV/2V/20V/200V/600V Resistor : 400/40K/400K/4M/40M Frequency :10Hz/100Hz/1KHz/10KHz/100KHz/1MHz/10MHz Capacitance: 5nF/50nF/500nF/5μF/50μF/200μF Temperature: -4℉－＋1383℉(-20℃ - +750℃) Features: Auto Ranging,NCV,Diode,Continuity Buzzer,Low Battery Display,Data Hold,Relative Data Hold Auto Power-off,Overload Protection,Sampling Frequency:3times/s , Max Display:3999 General Characteristics: Product Color: Iron-gray and Orange Product Weight:200g LCD Size:38.4×28.4mm/1.5 inch x1.1 inch Meter Size:183×47×25mm /7inch x 2.5 inch x 1.1inch(L*W*H) Power:2×1.5V AAA power is not included Package Content: 1 x Digital Clamp Meter 1 Pair x Test Probe Leads 1 x Temperature Probe 1 x Carrying Case 1 x English Manual

Manufacturer: BSIDE Brand: BSIDE Model: ACM03 Plus

Features:It is designed according to IEC1010-1 and IEC1010-2-032 concerning safety requirements.Safe and professional3999 counts digital LCD displayAuto/Manual rangeUse for measure AC/DC current, AC/DC voltage,resistance, capacitance, frequency, diode and circuit, etc.Continuity test, duty cycle test Non contact voltage detectorClamp lighting & back light.Data holdSpecifications:DCV: 400m/4V/40V/400V±0.8%, 600V ±1.0% ACV: 4V/40V/400V/600V±1.2%ACA: 40A/400A±3.0%DCA: 40A/400A±3.0%Resistance: 400?/4k?/40k?/400k?/4M?±1.2%, 40M?±2.0%CAP: 40nF/400nF/4?F/40?F/100?F±3.0%Frequency: 50Hz/500Hz/5kHz/50kHz/100kHz±1.0%NCV:90-1000V(50-500Hz)Duty Cycle: 0.1~99.9% ±3.0%Diode / ContinuityFunctionRangeResolutionAccuracyDiode 1V0.001VDisplaying approximate forward voltage of diodeContinuity Built-in buzzer sounds when resistance is lower than 50ohm.Open circuit voltage: approx. 0.5VOverload protection: 600V DC or True RMS AC

Manufacturer: Fluke Corporation Brand: Fluke Model: C520A

Large tool belt loop and top flap to secure meter. Holds Fluke Electrical Testers. 1 year warranty. Measures 3.125" width by 10" height by 2.125" depth.

Manufacturer: Fluke Corporation Brand: Fluke Model: BB120

Safety designed female BNC to shielded banana adapter for use with Fluke ScopeMeter 120 series and Fluke-43B power quality analyzer. Two adapters come in package. Maximum signal voltage: 300V rms CAT III per IEC 1010-02-031. Maximum voltage to ground: 600V rms CAT III per IEC 1010-2-031.

Manufacturer: Amprobe Brand: Amprobe Model: AM-510

Designed for light commercial and advanced residential applications Great for automotive and electrical testing applications Perfect for Electricians and Home Users The AM-510 Commercial/Residential Multimeter is designed for light commercial and advanced residential applications. It is an auto- or manual-ranging meter for measuring current, voltage, resistance, capacitance, frequency, microamps, and duty cycles in commercial, home repair, automotive and electrical testing applications. It comes with non-contact voltage detection, built-in flash light, bright backlit display and auto power-off feature. Packed with Features The AM-510 measures alternating current (AC) and direct current (DC) to 10 amps, AC voltage and DC voltage to 600 volts (V), resistance to 40 megaohms, capacitance to 100 microfarads, frequency to 10 megahertz (MHz), microcurrent to 4,000 microamps, and duty cycles to 99%. The battery test feature checks the amount of charge remaining in standard 1.5V and 9V batteries. The microamp reading identifies current changes in flame detector applications. The backlit liquid crystal display (LCD) is visible in low light. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of readings. The hold function keeps a reading on the display, even after the meter is disconnected. Audible continuity confirms that the circuit is capable of conducting electricity and the diode test detects whether the circuit's diodes work properly. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve the battery, and a low-battery indicator signals when the meter's batteries need to be replaced. The back of the meter has a tilt stand that allows the meter to be propped on a surface for hands-free use. A probe holder on the body of the meter stores probes when not in use. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V. The A...