Oscilloscope Accessories - Page 22

Manufacturer: Fluke Brand: Fluke Model: 4561297

Replacement Probe Tips for Fluke Battery Analyzers is for use with Fluke BT520 and BT521 Battery Analyzers Intelligent Probes.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS40-III

10:1 Voltage probe with safety-designed shrouded 4mm test pin, for use with 120 Series ScopeMeter. Hook clip (Red) and ground lead included. The shrouded 4mm banana test pin makes this probe also compatible with standard safety-designed alligator clips. Set contains 600V CAT III / 1000V CAT II rated items: 10:1 voltage probe (1 black), hook clip (1 red) (HC120-III), ground lead with mini alligator (1 black). Attenuation 10x. Bandwidth DC to 40 MHz (-3 dB). Maximum input voltage 600V CAT III / 1000V CAT II as per IEC61010-031:2008. Input resistance/capacitance, 5 mega ohm / 15.5 pF. Compensation fixed for ScopeMeter 120 series (14 pF). Safety-shrouded 4 mm banana pin with test probe tip. Instrument connector 4mm shielded banana plug. Cable length 1.2m. Safety IEC / EN 61010-031:2008; UL61010 B-2-031; CSA C22.2 No. 1010.2.031. Pollution Degree 2. Protection Class II (double insulation). Black color. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4628917

Extreme Hard Case with do-it-yourself custom foam inserts.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2726620

Fluke 2GB compact flash card for 1760 3 phase power quality recorder.

Manufacturer: Fluke Corporation Brand: Fluke Model: C290

Hard-Shell protective carrying case for use with 190 Series II ScopeMeters test tool.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4116762

Fluke softcase for 174X and 43X-II power quality analyzer.

Manufacturer: Fluke Corporation Brand: Fluke Model: 617727

The Fluke i410 current clamp is an accessory that extends the range of digital multimeters for measuring current in electrical testing applications. An attached 1.6m output cable connects the clamp to a compatible multimeter that can accept safety-shrouded banana plugs and display 1 milliVolt (mV). It has a clamp that measures AC and DC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. It has a zero error adjustment to set the mulitmeter's display to zero for accurate DC readings. The unit operates on one 9V battery. It meets International Electrotechnical Commission (IEC) safety standards 61010-1 and is rated for CAT III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a battery and instructions. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.SpecificationsMaximum AC input400 ampMaximum DC input400 ampOutput level1mV per amp DC or ACBasic accuracy3.5% + 0.5 ampInstallation ratingCAT III, 600VStandards metIEC safety standard 61010, CE markingPower supply9VWeight0.5 kg/17.6 oz.Dimensions209 x 78 x 48mm/3.09 x 8.21 x 1.87 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two ...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV201

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV300

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Tektronix Brand: Tektronix Model: TDS3VID

The Tektronix TDS3VID video application module triggers on specific lines in broadcast and non-broadcast (custom) standards and on analog HDTV formats (1080i, 1080p, 720p, 480p), and is intended for use with Tektronix TDS3000C series oscilloscopes. It supports Vectorscope graticules (100% and 75% color bars) and requires a component video signal.Tektronix manufactures test and measurement equipment such as oscilloscopes, signal generators, and protocol, logic, and spectrum analyzers. The company, founded in 1946 and headquartered in Beaverton, OR, meets International Organization for Standardization (ISO) standards 9001 and 14001.