Oscilloscope Accessories - Page 26

Manufacturer: Fluke Corporation Brand: Fluke Model: 85RF II

The 85RF high frequency probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500 MHz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe's DC output is calibrated to be equivalent to the rms value of a sine wave input. 0.25 to 30V rms voltage range. 30V RMS, 200V DC maximum input voltage. 1:1 AC to DC ratio. Ratio accuracy (at 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB. Below 0.5V: +/- 1.0 dB. Add +/- 0.2 dB in RF fields of 1 to 3 V/m. Frequency response (relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB. 100 MHz to 200 MHz +/- 2.0 dB. 200 MHz to 500 MHz +/- 3.0 dB.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530862

Fluke sensor magnet mount for handheld vibration tester.

Manufacturer: Agilent Brand: Agilent Model: N2865A

Price Consideration: You are saving $ 33.00 dollars purchasing from us. Warranty: 10 days rights to return after receive it in the same condition as we ship it to you. In case of returns please ask us for a RMA Number and place it in a visible place in the box. Accessories Included: None N2865A USB Host Module for 3000 Series Oscilloscope. Brand New in Box.

Manufacturer: Tektronix, Inc (TEK) Brand: Tektronix, Inc (TEK)

Tektronix, Inc. TEK 134 Cathode-Ray Oscilloscope

Manufacturer: Fluke Corporation Brand: Fluke Model: 709H/TRACK

Fluke Corporation introduces the Fluke 709H Precision Current Loop Calibrator with HART Communications, an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. The Fluke 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications. The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in “two places at once.” The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.

Manufacturer: Fluke Corporation Brand: Fluke Model: MA190

Kit includes 50 ohm BNC insulated feed through terminator, 50 ohm BNC terminator with 10:1 signal attenuation, 1 ohm current shunt for current measurements, safety-designed BNC cable, 1.5m (5'), insulated BNC (f) to 4mm-banana plug adapter, dual 4mm banana receptacles (1 red, 1 black). The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 series for use in the field of medical imaging and video systems.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700-IV

4-20mA Current shunt. Very accurate current shunt to use for verification and calibration of process control loops. Can be used with accurate voltmeters for calibration purposes. Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically). 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010

The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010-KIT

Kit included i1010 1-600A AC rms, 1-1000A DC current clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3949761

Fluke 5A clamp-on current transformer for 1750 3 phase power quality recorder.