Oscilloscope Accessories - Page 23

Manufacturer: Fluke Corporation Brand: Fluke Model: 2673962

Fluke polyester case for 1750 and 1760 3 phase power quality recorders.

Manufacturer: Fluke Brand: Fluke Model: 4542264

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162AC

Fluke EI-162AC Clip-on Current Transformer (Inducing) The EI-162AC Clip-On Current Transformer (Inducing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-RACK

This rack mount accessory is compatible with WaveSurfer MXs-B and MSO MXs-B oscilloscopes.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540445

Fluke a clip-on current transformer. Measuring range selectable per software: 0.01 A to 1 A and 0.1 A to 10 A. Peak current for sinusoidal currents: 3.7 A and 37 A. Intrinsic error: 0.5 percent. Frequency range: 40 Hz to 10 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.5 degree. Jaw opening: less-than 15-millimeters diameter or 15-millimeters by 17-millimeters bus bars.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 T

The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...

Manufacturer: Fluke Corporation Brand: Fluke Model: 715

The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution. Measure voltage output process signals from PLC’s transmitters. The 715 is designed to source or simulate a 24 mA loop current and source voltage to 100 mV or 10V. Features 24V loop supply with simultaneous current measurement, improved battery life, 250 ohm HART resistor with loop power, step and linear ramp output function and configurable zero and span settings. The calibrator’s enhanced voltage and current measure and source accuracy creates a highly functional tool. The 715 is compatible with the TPAK ToolPak magnetic hanging system (sold separately). Includes a protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2452080

Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Measure or source pressure using any of 29 Fluke 700Pxx pressure modules. Source mA with simultaneous pressure measurement to conduct valve and I/P tests. Integrated pressure switch test allows you to capture the set, reset and dead band of a switch. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Transmitter error percent calculation, interpret calibration results without a calculator. Perform fast linearity tests with auto step and auto ramp features. Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Store frequently-used test setups for later use. Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing. HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation. Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability. 3000 m operating altitude. EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 approved. Runs on 4 AA alkaline batteries. Current DC: 24 mA 0.01 percent + 2 mA. Resistance: 0.0 to 4000 O +/- 0.015 percent. Storage temperature: -20 degrees C to +71 degrees C. 726 including: 1 set of AC72 alligator clips, 1 set of stackable test leads, 1 set of TL 75 test leads, user manuals and NIST- traceable calibration report and data.

Manufacturer: GABOTRONICS Brand: GABOTRONICS

Xprotolab Plain Plug-in Mixed Signal Oscilloscope The Xprotolab Plain is the most inexpensive but feature rich oscilloscope in the market. It consists of a simple DIP module with a USB interface. Visualization of the signals and controlling the oscilloscope is done on the PC interface software (open source). The Xprotolab Plain is similar to the original Xprotolab, but doesn't have the display and buttons, so it only works with the USB interface. The board measures only 1 x 2 inches, and can be mounted directly on a breadboard. The Xprotolab can also be used as a development board for the AVR XMEGA microcontroller.Features:Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signalsAdvanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger levelMeter Mode: Average, Peak to peak and Frequency readoutXY Mode:           Plot Lissajous patterns           See the phase difference between two waveforms           V/I Curve tracer with an external resistorSpectrum Analyzer with different windowing options and selectable vertical logHorizontal and Vertical Cursors with automatic waveform measurementsArbitrary Waveform Generator with Sweep on all parametersDisplay options: Persistence, Different grid options, and moreCurve tracer functionIncludes: Two 10-pin headersSpecifications:General Specifications:ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROMModule size: 1.98" x 1.01"PDI interfaceUSB connectivity: Windows, Linux, Mac, AndroidLogic Analyzer specifications:8 Digital Inputs, 3.3V levelMaximum sampling rate: 2MSPSFrequency counter: 16MHzProtocol Sniffer: UART, I2C, SPI

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700ILF

In-line filter. For use with fluke 700 series pressure modules and the fluke 710 series pressure calibrators.