Oscilloscope Accessories - Page 25

Manufacturer: Fluke Corporation Brand: Fluke Model: I6000S FLEX-24

The i6000sflex is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Current ranges: 60A/600A/6000A AC rms. Output sensitivity (AC coupled): 50 mV /5mV / 0.5mV per A. Load impedance: 100 k ohm minimum. Accuracy (at +25 degree C): +/-1 percent of range (45 - 65 Hz). Linearity (10 to 100 percent of range): +/-0.2 percent of reading. Noise: 8mV AC rms (60 A), 2 mV AC rms (600/6000A). Frequency range: 10 Hz to 50 kHz (- 3 dB). Phase error: < +/-1 degree (45 – 65Hz), +/-10 degree (at 20 kHz). Position sensitivity (with cable > 25mm from the coupling): +/-2 percent of range. External field (with cable > 200mm from the head): +/-1 percent of range. Power supply: 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply. Temperature coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600 V AC rms or DC. Head cable diameter: 14.3mm. Cable length (head to electronics): 2 meters. Operating temperature range: -20 to +90 degree C (head), -20 to +85 degree C (electronics). Storage temperature range: -40 to +105 degree C (head), -20 to +85 degree C (electronics). Operating humidity: 15 to 85 percent (non condensing).

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-VT04-MAINT-KIT

VT04 Preventive Maintenance Kit Includes: Fluke VT04, and Fluke 1507 Fluke VT04 Visual IR Thermometer Handheld with Automated Monitoring Alarm Fluke 1507 Insulation Resistance Tester Fluke VT04 Handheld Visual IR Thermometer with Automated Monitoring Alarm Detect issues instantly! Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared camera creating a brand new tool category. Detect issues instantly with built-in digital camera No training required True pocket size design Breakthrough affordability Designed to see it all Every Fluke Visual IR Thermometer has a built-in digital camera with a thermal heat map overlay to instantly identify the exact location of the problem. See the difference See how a traditional IR thermometer and an entry level infrared camera make it challenging to communicate the issue on breaker 20. Key Applications Overloaded breakers Evaluate compressor heat expansion valves   Overheating motor Unbalanced three phase supply   Overheating bearings Combination starter   Faulty air damper Normal operating temperature on mission critical breaker   Abnormal heat patterns in an AC condenser Detect issues with switchgears Fluke 1507 Insulation Resistance Tester  The Fluke 1507 Insulation Tester is compact, rugged, reliable, and easy to use. With its multiple test voltages, the 1507 is ideal for many troubleshooting, commissioning, and preventative maintenance applications. Additional features, like the remote probe on this tool save both time and money when performing tests.

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO EARTH STAKE

The Fluke GEO earth stake is used with Fluke 1623 and 1625 earth ground testers to measure the ability of the earth ground system or individual electrode to dissipate energy from the site. The auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp. The stake has a corkscrew end to bore into the ground. The Fluke GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: IR189USB

USB cable adapter for Fluke-189/FVF2 kit.

Manufacturer: Fluke Brand: Fluke Model: FLK-PC3000 FC

' PC Adapter, For Use With FC3000 Series Multimeter , FC Series Modules, Features Wireless Communication, Includes Windows Software CD, Manufacturers Warranty Length 1 yr. '

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: GE4511RA

The GE Series is a high quality, easy to use family of 5mm passive voltage oscilloscope probes in stylish, slim-line bodies. The series features superior input impedances for enhanced measurement performance when compared to other oscilloscope probes. It is a high bandwidth, high impedance 10x passive voltage probe with 10 mohms input impedance. Probe features a readout actuator pin (sense pin) on the BNC connector. Bandwidth: 500 MHz. Attenuation: 10x. Input Impedance: 10 mega ohms. Input Capacitance: =10 pF. Output Impedance: 1 mega ohms. Risetime: 0.7 ns. IEC Rating: 300 Volt CAT II. Compensation: 6–22 pF. Cable Length: 1.2 meter. Readout Actuator. Operating Temperature: 0 to +50 degree C. Humidity: 85 percent RH or less (at 35 degree C). RoHS (2002/95/EC) Compliant.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP190

Designed for use with the Fluke ScopeMeter 190 and 190C series, the Fluke BP190 rechargeable NiMH battery pack, this set of NiMH batteries has to be charged in the instrument. 7.2V Nominal voltage. 3,500 mAh capacity.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2577796

The Fluke TI20-RBP NiMH battery pack is designed for use with Fluke Ti20, Ti25, Ti10, TiR, TiR1, TiS, Ti9, and TiRx thermal imagers (sold separately). This rechargeable battery extends thermal imager usage time in the field. It can be charged with the Fluke charging base (sold separately) or with the thermal imager when plugged in to AC power. Thermal imagers, also known as thermal cameras, infrared imagers, or infrared cameras, capture images of heat patterns for examination and analysis. Objects emit infrared light, and this light radiates heat in varying temperatures. A sensor within a thermal imager detects radiant heat and transforms it into patterns on a thermal imaging system. Thermal imagers have LCD screens to display an image of the object in a range of color that corresponds with variations in temperature. Technicians can transfer images and video to a computer for process monitoring and analysis. Some thermal imagers can show visual images along with thermal images to make an object more identifiable. Thermal imagers are used in an array of industries, including construction and building maintenance, manufacturing, firefighting, medicine, law enforcement, and military among others. A wide range of applications include building diagnostics to identify hidden moisture or heat leaks, industrial and commercial maintenance to prevent or identify electrical or mechanical equipment failure, thermal cameras that restore visibility in fire control, medical and veterinary diagnostic imaging to identify health conditions, and surveillance cameras for law enforcement and facility security.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Brand: Fluke Model: A3001 FC - Fluke

A true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below.  Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter  Fluke Connect Mobile app The iFlexTM Wireless Current Module allows you to measure around awkward sized conductors or get into tight spaces and makes wire access easier.    Fluke Connect See it. Save it. Share it. All the facts, right in the field. Fluke Connect with ShareLive TM video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android TM and iOS and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Supported smart phones: AndroidTM 4.3 & up iPhone® 4s & later

Manufacturer: Fluke Brand: Fluke Model: 4637005

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.