Oscilloscopes & Accessories - Page 102

Manufacturer: Probe Master Brand: Probe Master Model: 4902-1RA

Oscilloscope probe with readout actuator, 250MHz, 1X/10X, 600V, 3.5ft, BASIC KIT

Manufacturer: Probe Master Brand: Probe Master Model: 4905-3K

Oscilloscope probe, 200MHz, 10X, 600V, 6.6ft, DELUXE KIT

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2862B

The Keysight N2862B low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 M?. The probe can be adjusted for low-frequency compensation and high-frequency compensation. Cable length is 1.2 m. For the best measurements you should compensate your probe to match its characteristics to the oscilloscope. The N2862B is a replacement of the N2862A. The N2862A will be discontinued in June 2011 and will be supported for 5 years until September 2016. The old and new replacements are 100% form, fit, function and price equivalent to the products they replace.

Manufacturer: Pomona Electronics Brand: Pomona Model: 6496

Featuring a new, compact, ergonomically designed probe handle, these modular general purpose passive voltage probes are ideal for use with a wide variety of oscilloscopes. They also feature a spring-loaded, pogo-pin replaceable tip. The fine tip probes are perfectly suited for probing high-density chip leads with less than 0.060in (1.52mm) spacing. Modular in design, the probe handle is capable of receiving a variety of spring-loaded and fixed tips, providing greater testing versatility. An affordable, versatile probe for many uses.

Manufacturer: Pomona Electronics Brand: Pomona Model: 6498

Featuring a new, compact, ergonomically designed probe handle, these modular general purpose passive voltage probes are ideal for use with a wide variety of oscilloscopes. They also feature a spring-loaded, pogo-pin replaceable tip. The fine tip probes are perfectly suited for probing high-density chip leads with less than 0.060in (1.52mm) spacing. Modular in design, the probe handle is capable of receiving a variety of spring-loaded and fixed tips, providing greater testing versatility. An affordable, versatile probe for many uses.

Manufacturer: North Coast Electric Brand: Fluke Model: i2500-10

The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 1.8m (6') cable. 40 dB External magnetic field rejection. Safety conformance: IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV.

Manufacturer: Fluke Brand: Fluke Model: 4566209

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Probe Master Brand: Probe Master Model: 4901-4KRA

Oscilloscope probe with readout actuator, 125MHz, 1X/10X, 600V, 10ft, DELUXE KIT

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2889A

The Keysight N2889A low-cost passive probe provides up to 350 MHz bandwidth and features a high input resistance of 10 M? (@10:1 mode) to address a wide range of measurement needs with low probe loading. The N2889A provides a switch in the probe handle that allows to choose the attenuation ratio between 1:1 and 10:1. The probe can be adjusted for low-frequency compensation and high-frequency compensation. For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

Manufacturer: SainSmart Brand: SainSmart Model: DDS140 + Signal Generator+Logic Analyzer Color: DDS-140 + Signal Generator + Logic Analyzer

Overview: SainSmart DDS140 is a medium-performance oscilloscope which can be extended to achieve oscilloscope, signal generator and logic analyzer triple main functions by inserting different sub-modules. The highlighting advantages are the optional modular structure and high performance price ratio. Instead of spending high price on a traditional oscilloscope, signal generator or logic analyzer, this product will be a good choice. Features: •Computer USB supply power directly •Support XP~Win8 •Waveform record, continuous playback and specified frame playback functions by frame-by-frame •Input channel arithmetic and FFT analysis •Anti-aliasing features of waveform drawing to reduce rendering errors further •Memory unction of user personalization settings •The rapid completion of the mouse to control the trigger function settings Logic Analyzer: •Number of Channels: 8 channels •Input Level: 3.3V/5v TTL/CMOS Logic level compatibleV •Maximum sampling rate: 100MHZ •Memory Depth: 32K per channel •Output Bias: Software adjustable Signal Generator: •Waveform Type: Square wave, sine wave, triangle wave, PWM •Amplitude: Software adjustable output range-4V ~ +4 V •Frequency: 1~20M HZ(sine wave) continuously adjustable, PWM output frequency limit 20K HZ •Bandwidth: 5M HZ(Sine wave) •Bias: Software adjustable •Duty: Software adjustable PWM output duty cycle, 10% of the ladder Download: https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-010-731/DDS140.zip https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-010-731/CD/DDS140.rar