Oscilloscopes & Accessories - Page 110

Manufacturer: Hantek Brand: Hantek

The performance of this model could even better than the performance of benchtop oscilloscope. It has 4 independent analog channels, 1GSa/s real-time sampling rate, 2mV-10V/DIV input sensitivity, and 250MHz bandwidth. It is powered by USB2.0 Interface, plug and play device with small size which is easy for carrying. High cost performance, pass/fail test, resourceful trigger function, dynamic cursor tracking, waveform record and replay function.Specifications Brand: Hantek Model: Hantek6074BC Channel: 4 Isolated Channels Bandwidth: 70MHz Input Sensitivity: 2mV/div～10V/div Sampling Rate: 1GSa/s Material: Metal + Plastic Oscilloscope Probe Model: PP-90 Item Size: Approx. 210 * 125 * 37mm / 8.3 * 4.9 * 1.5in Item Weight: Approx. 457.3g / 16.1oz Package Size: Approx. 25 * 18.5 * 11cm / 9.8 * 7.3 * 4.3in Package Weight: Approx. 1136.6g / 40.1ozNote Hantek 6074BC Oscilloscope is for 3 years Warranty！ Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.What is in the box 1 * USB Digital Storage Oscilloscope 2 * Dolphin/Gator Clip Cable 2 * Oscilloscope Probes 1 * USB Power Line 1 * Upper-computer Software CD with User Manual

Manufacturer: Rigol Brand: Rigol Model: UltraSpectrum

Software for the DSA1000, DSA1000A and DSA800 series spectrum analyzers to be used within the UltraSigma package.

Manufacturer: Tenma Brand: Tenma Model: 76-160

' Low noise figure Wide assortment of included accessories Specifications: Attenuation; 10:1 (fixed) Bandwidth: 0 ~ 500MHz Rise time: 0.7nS Compensation range: 8~18pF Input impedance: 10MΩ Input capacitance: 8pF Max input voltage: 600V (CAT I), 300V (CAT II) Cable Length: 1.3m Meets: EN61010-031 CAT II'

Manufacturer: Rigol Brand: Rigol Model: DP712

.da-ilf-gsep{ background-color: #f0c528; } .da-ilf-gsep h3{ color: #212419 !important; }

Manufacturer: Rigol Brand: Rigol Model: DP711

DP711 Programmable Linear DC Power Supply (single channel, 30 V/5 A).   Rigol DP711 Programmable Linear DC Power Supply (single channel, 30 V/5 A) × Single output, 30 V/5 A, total power up to 150 W Transient response time:

Manufacturer: Promax Brand: Promax Model: DC-590

Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be powered with batteries or electricity, or may have a built-in generator. They may have Canadian Standards Association (CSA) or European Conformity (CE) certification, or a specific category (CAT) safety rating, such as CAT5e. Oscilloscopes are commonly used for testing, measuring, and inspecting in science, engineering, telecommunications, automotive, and industry applications. PROMAX manufactures signal analyzers and electrical meters for the communications and technology industries, including fiber optic testers, radio frequency equipment, cable TV analyzers, and LAN and telephone testers. The company, founded in 1963, is headquartered in Barcelona, Spain.

Manufacturer: Promax Brand: Promax Model: DC-590

Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be powered with batteries or electricity, or may have a built-in generator. They may have Canadian Standards Association (CSA) or European Conformity (CE) certification, or a specific category (CAT) safety rating, such as CAT5e. Oscilloscopes are commonly used for testing, measuring, and inspecting in science, engineering, telecommunications, automotive, and industry applications. PROMAX manufactures signal analyzers and electrical meters for the communications and technology industries, including fiber optic testers, radio frequency equipment, cable TV analyzers, and LAN and telephone testers. The company, founded in 1963, is headquartered in Barcelona, Spain.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-63TCAL

The Fluke 63 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -32 to +535 degrees C (-25 to +999 degrees F) with accuracy that varies from + or - 1 degree C to + or - 3 degrees C depending on the temperature range. It has a 12:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It can display the current temperature and the maximum temperature for comparison during process monitoring. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The CE mark indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-32 to +535 degrees C (-25 to +999 degrees F)Infrared sensor accuracy-32 to -26 degrees C (-25 to -15 degrees F): + or - 3 degrees C (+ or - 5 degrees F); -26 to -18 degrees C (-15 to 0 degrees F): + or - 2.5 degrees C (+ or - 4 degrees F); -18 to +23 degrees C (-0 to 73 degrees F): + or - 2 degrees C (+ or - 3 degrees F); For targets above 23 degrees C (73 degrees F): + or - 1% of reading or + or - 1 degrees C (+ or - 2 degrees F), whichever is greaterDisplay resolution2 degrees C / 5 degrees FDistance-to-spot ratio12:1Power Supply9V or NiCd batteryWeight320g/11oz.Dimensions200 x 55 x 160mm / 8 x 2 x 6 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focus...

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2872A

The N2872A passive probe offers DC to 350 MHz and 10:1 attenuation factor to address a wide range of measurement needs. Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Keysight N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today's high-speed digital applications. The sharp probe tip is spring loaded to help engineers keep the probe from slipping off the device under test. Insulating IC caps keep the small probe tip centered on the IC lead and keep it from shorting adjacent leads. Standard flat blade ground connector and self-adhesive copper ground pad help reduce ground inductance while offering easy ground access. Optional probe tip accessories provide specialized capabilities for demanding applications. Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 M? input. Recommended for oscilloscopes with

Manufacturer: Probe Master Brand: Probe Master Model: 4232

Differential Probe, 25MHz, 10X/100X, 1400V