Oscilloscopes & Accessories - Page 109

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-61

The Fluke 61 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -18 to +275 degrees C (0 to 525 degrees F) with an accuracy of + or -2% of the reading or + or - 2 degrees C (+ or -3.5 degrees F), whichever is greater from -1 to +275 degrees C (30 to 525 degrees F) and + or - 3 degrees C (+ or -5 degrees F) outside this range. It has an 8:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-18 to +275 degrees C (0 to 525 degrees F)Infrared sensor accuracyFrom -1 to +275 degrees C (30 to 525 degrees F): + or - 2% of the reading or + or - 2 degrees C (+ or - 3.5 degrees F), whichever is greater; From -18 to -1 degree C (0 to 30 degrees F) + or - 3 degrees C (+ or - 5 degrees F)Display resolution2 degrees C / 5 degrees FDistance-to-spot ratio8:1Power Supply9V or NiCd batteryWeight227g / 0.5lb.Dimensions184 x 45 x 38mm / 7.25 x 1.75 x 1.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricit...

Manufacturer: Hantek Brand: Hantek Model: DSO2090

This Compact, Low Cost Product Offers You the Features only Found in High End, Very Expensive Standalone Digital Storage Oscilloscope. It combines the features of a traditional standard Digital Storage Oscilloscope in one compact unit at fraction of the cost.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2776A

The N2776A differential browser tip allows you to quickly probe the different points in your device. The tip includes integrated damping resistors to achieve flat response across the rated bandwidth. To adjust the tip spacing, turn the handles that are located on the tip ends.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3290RA

One of our highest frequency passive probes at 500 MHz. Excellent replacement probe when application requires the utilization a high frequency scopes. Probe includes a readout actuator pin (sense pin) on the BNC connector. IEC rating: 300 V CAT II. RoHS (2002/95/EC) compliant. Attenuation: 10x. Input Impedance: 10 mega ohms. Input Capacitance: =8 pF. Output Impedance : 1 M ohms. Risetime: 0.7 ns. Compensation: 8-18 pF. Cable length: 1.3 m. Readout actuator. Operating temperature: 0 degree to +50 degree C. Humidity: 85 percent RH or less (at 35 degree C).

Manufacturer: Probe Master Brand: Probe Master Model: 4916

3 Probe Master Kit includes (2) 4905-2, 10X, (1) 4902-2, 1X/10X, Includes 21 accessories and case

Manufacturer: Sain Store Brand: SainSmart Model: DS0203 Color: Black

Description: The SainSmart oscilloscope easily suffice common electronic engineering tasks. It's based on ARM cortex M3 (STM32VCT6), providing 72MSa/s Sampling Rate with integrated FPGA and high speed ADC. Internal 8MB USB disk could be used to store waveform, user application and upgrade firmware. This is the newest version with the software upgraded to lib 2.25 app2.6 Specification:    •Analog channel * 2 : [CH_A] [CH_B];    •Digital channel * 2 : [CH_C] [CH_D];    •Vertical Scale: 20mV-10V/div (x1 probe);    •Vertical solution: 8 bit ;    •Input coupling: AC/DC ;    •Max input voltage: 80Vpp (x2 probe);    •Storage: 4K per channel    •Software trigger type: edge, pulse, level (to be added)    •Hardware trigger type: edge    •Trigger source: CH1/CH2/EXT    •Test Signal generator: 10Hz to 1Mhz    •Storage: internal 2MB USB disk    •Auto measure: Vmax, Vmin, Vpp, Vavr, Vrms, Freq, Period, Pulse, Duty    •Cursor measurement: Level, Voltage    •Display mode: CH1, CH2, EXT, CH1+CH2, CH1-CH2, CH1*CH2    •Sampling mode: real time    •Sampling rate: 1kSa/s - 72MSa/S    •Power: Li-ion battery    •Dimension: 98 * 60 * 14.5 mm    •Weight: 80g (without battery) Package list: 1x SainSmart DSO203/Quad with battery 2x Mueller mcx osilloscope probes Download: http://s3.amazonaws.com/s3.image.smart/download/101-10-101/101-10-101.rar

Manufacturer: AGILENT TECHNOLOGIES Brand: Agilent Technologies Model: N2863B-KEYSIGHT TECHNOLOGIES

Price for: Each 1 . Bandwidth: 300MHz. For Use With: 1000, 3000, 5000, 6000 and 7000 Series Oscilloscopes. For Use With: 1000, 3000, 50. Lead Length: 1. 2m. RoHS Compliant: NA. SVHC: To Be Advised. Test Probe Functions: Frequency. Test Probe Functions: Frequency. Test Probe Ratio: 10: 1. Test Probe Type: Oscilloscope. Test Probe Type: Oscilloscope

Manufacturer: Rigol Brand: Rigol Model: AT-DS1000Z

Rigol AT-DS1000Z Advanced Triggering Option. Advanced Triggering Option: RS232/UART,I2C,SPI,Runt,Windows,Nth Edge, Delay,Time Out ( Software Key will be sent via email )

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: 10070D

The Keysight 10070D 20 MHz passive probe is a great choice if you are looking for high quality at a very reasonable price. This general purpose probe is designed specifically to give you optimal performance with your 5000, 6000, 7000 Series, 54620 Series and 9000 Series oscilloscopes. Rugged enough for general purpose measurements, the 10070D features a durable cable and a solid stainless steel probe body encased with a hard, fracture-resistant plastic. -General purpose retractable hook tip - hooks onto wires and test points for hands-free probing -Ground bayonet - provides short, flexible ground lead for high-frequency measurements -General purpose alligator clip ground lead - allows for versatile grounding -Color tags (2 tags in each color: orange, white, blue and green) - by placing tags at both ends of the probe cable, you can quickly identify your probes

Manufacturer: AEMC Brand: AEMC Model: 2960.12

The replacement battery is ideal for use with 5600 model Micro-Ohmmeters. The battery does not contain any polluting materials.