Voltage Testers - Page 13

Manufacturer: Fluke Corporation Brand: Fluke Model: TL940

1 Pair (red, black) of test leads with multi-stacking 4mm banana plugs and mini-hooks. Mini-hooks attach to component leads up to 1.5mm diameter. 90cm Long PVC insulated leads. 30V rms or 60V DC, 5A. 1 Year warranty.

Manufacturer: Halcyon Technologies Brand: Halcyon Technologies

Manufacturer: iCircuit Technologies Brand: PICcircuit Model: iCP12

usbStick is a mini size 28 pin USB PIC IO board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period. Peripheral Features: • 13x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins) • Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps) • Maximum Voltage: 5Vdc • 100mA current output at VDD pin with over-current protection • 20MHz oscillator • Green LED - power on indicator • 2x LEDs (Green, Red) - status indicator • ICSP Connector - on-board PIC programming • Switch Mode Selection - Boot or Normal mode SmartDAQ v1.3 Features: • Sampling channel: 6x Analogs (10 bits ADC) + 7x Digitals (Input/Output) • Maximum Sampling rate: 1KHz or 1mSec/Samples • Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution • Sampling period: • mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500 • Sec: 1, 2, 5, 10, 20, 30 • Min: 1, 2, 5, 10, 20, 30, 60 • Trigger Mode: Larger [>], Smaller [

Manufacturer: Fluke Corporation Brand: Fluke Model: TL960

1 pair (red, black) of test leads with multi-stacking 4mm banana plugs and micro-hooks. Micro-hooks attach to component leads up to 1mm diameter. 90cm long PVC insulated leads. 30V rms or 60V DC, 15A. 1 Year warranty.

Manufacturer: Aidbucks Brand: Aidbucks Model: PM8908C Color: Orange

Our suppliers have 16 years of experience in the development and design Production of meters, focusing on the production of high-quality and Safe products. 1. Wide Testing Range. All electric appliances in your family can be tested by it, such as circuit breakers, lighting fixtures, switches, outlets, wires and anywhere you need it . 2.100% Safe. Test in a non-contact way, so do not worry about being shocked by the electricity. 3. Safety Warning. As long as voltage is detected, there will be LED flashes and buzzer. 4. Easy to use and carry. Note1.This function is designed for voltage detection in the weak electric field. 2. Please have a check whether the LED in the power button is lighted before you use it, in order to make sure the tester is operational. Specifications: Operating Voltage: 12--1000V ACFrequency: 50--60Hz Alarm Mode: Sound and lightNCV Sensitivity: Three levels (low, medium, high) NCV Empfindlichkeit: AutomatischWorking temperature: 0 ~ 40 ℃Storage temperature: -10 ~ 50 ℃Working height (altitude):

Manufacturer: bayite Brand: bayite

This meter can only be used with one-phase AC power. And it can only measure the active power(real power). It doesn't show Apparent power. For more information about the difference, please search AC POWER on wikipedia. Main Specifications: Working voltage: 80 ~ 260VAC Working frequency: 50/60Hz Measuring:Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Store data when power off The blue backlight can be turned on/off manually Test Range and Display format: 1.Power: test range: 0~22kW < 1kW, display: 0.0~999.9W 1kW~10kW, display: 1000~9999W > 10kW, display: 0.1~22.0kW 2.Energy: test range: 0~9999kWh 10kWh, display: 10~9999kWh 3.Voltage: test range: 80~260V(single-phase) Display: 80~260V 4.Current: test range: 0~100A Display: 0.00~99.99A Precautions 1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt. 2. Applied load should not exceed the rated power. 3. Wiring order can not be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x AC Power Multimeter

Manufacturer: Aidbucks Brand: Aidbucks Model: AB0004 Color: Orange/Black

Professional for Everyday UseAidbucks has 16 years of experience in developing and manufacturing digital multimeter, digital clamp meter, non-contact voltage tester and infrared thermometer etc, focusing on productingf high-quality and safe products. We also established a professional technical support team and after-sales service team, is committed to customer service purposes!Specifications: DC Voltage : 200mV/2V/20V/200V ±(0.5%+3), 600V (0.8%+5) AC Voltage : 2V/20V/200V±(0.8%+3) 600V±(1.0%+5) DC Current : 200uA/2mA/20mA/200mA±(1.8%+5) AC Current : 200uA/2mA/20mA/200mA±(2.0%+5) Resistance : 200ohm/2Kohm/20Kohm/200Kohm/2M ±(1.0%+3) 20M ±(1.2%+15) Environment condition of using: IEC/EN 61010-1 600V CAT III, pollution level 2 Altitude

Manufacturer: Proster Trading Limited Brand: Proster Model: PST99 Color: 6000 3 5/6

Proster VC99 3 5/6 digital multimeter holds functions of measuring DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, duty cycle, transistor, diode, and continuity, etc. It also can provide special functions including analog bar, unit symbol display, data holding, relative value measuring, maximal/minimal value measuring, auto/manual range switching (RANGE), auto power off and warning alarm. Specification: DCV: Range: 600mV/6V/60V/600V Accuracy:±(0.5%+3) /1000V Accuracy: ±(0.8%+3) ACV: Range: 6V/60V/600V/ Accuracy: ±(0.8%+5) /750V Accuracy: ±(1.0%+5) DCA: Range: 600uA/6000uA/60mA/600mA Accuracy:±(1.0%+3) /6A/20A Accuracy: ±(2.0%+5) ACA: Range: 600uA/6000uA/60mA/600mA Accuracy:±(1.2%+5) /6A/20A Basic accuracy: ±(2.0%+10) Resistance: 600Ω Accuracy:±(8%+5) /6kΩ/60kΩ/600kΩ/6MΩ Accuracy:±(0.8%+3) /60MΩ Basic accuracy: ±(1.2%+5) Capacitance: 40nF Accuracy:±(3.5%+10)/400nF/4uF/40uF Accuracy:±(2.5+5)/400uF/2000uF Accuracy: ±(5.0%+8) Frequency: 100Hz/1kHz/10kHz/100kHz/1MkHz/60MHz Basic accuracy: ±(0.5%+4) Continuity test: Approx less than 30Ω± 10Ω Low battery indication: Approx less than 2.4V Auto power off: Approx 15minutes Diode test: Yes hFE test: Yes Duty cycle measuring: Yes Data hold: Yes Analog bar: Yes Function protect: Yes Input impendence: 10Mohm Sampling rate: approx 3 times/s AC frequency response: 40-400Hz Operation way: Manual or auto range Max. display: 6000 LCD size: 65x41mm2 Battery: 3V AAAx2 Power dissipation: Quiescent current approx. 2mA Package Content: 1X Proster VC99 Digital Multimeter 2X Digital Multimeter Probe 1X Temperature Probe 2X AAA battery (in the Multimeter) 1X Carry Bag Note: The fuse is 12A, if you need to test 20A, you need to change the fuse. Warranty:This Proster VC99 Digital Multimeter Provides 18 Months Warranty.

Manufacturer: Tektronix Brand: Tektronix Model: TPP0200

The TMDP0200 is equipped with the TekVPI interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls.

Manufacturer: Amprobe Brand: Amprobe Model: 15XP-B

The Amprobe 15XP-B digital multimeter with built-in non-contact voltage detector is an average-sensing, auto- or manual-ranging meter for measuring current, voltage, and resistance, and for reporting logic states in electrical testing applications. The meter comes with a set of detachable test leads that measure alternating current (AC) and direct current (DC) to 2 amp, AC voltage to 750 volts (V), DC voltage to 1,000V, and resistance to 2,000 megaohms. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The logic test reports the logic state of a transistor-to-transistor (TTL) digital circuit in electronics. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category I installations up to 1,000V (which covers protected electrical equipment such as small household appliances), category II installations up to 600V (which ...