Voltage Testers - Page 25

Manufacturer: Fluke Corporation Brand: Fluke Model: TP82

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to ensure they are not left behind. Easily connects to test leads that have removable ends. Banana jack accepts all DMM and banana jack leads.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP81

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.

Manufacturer: Fluke Corporation Brand: Fluke Model: 812404

Digital multimeter replacement fuse. 600V Voltage. 2A Current.

Manufacturer: TRC Brand: TRC Model: 24098200203.0000 Color: Black/White

Manufacturer: Ideal Brand: Ideal Model: 61-076 Color: Yellow

This Vol-Con Solenoid Voltage Tester from IDEAL(R) is an extremely rugged and reliable three-in-one tester. It vibrates when voltage is present, and tests for high voltage up to 600 volts AC/DC and low voltage as low as 5V AC/DC. It is also an automatic switching continuity tester and has bright, long-life LED and neon indicator lamps. The leads are replaceable and have shielded probe tips. This comes with a two-year warranty and is CAT III 600 volts.

Manufacturer: Docooler Brand: Docooler

This digital 3 phase panel meter combines AC current, voltage and frequency measurement functions in one. With embedded design, it is easy to install.Specifications Rated Current: AC5A Rated Voltage: AC450V Frequency: 45-65Hz Power Supply: AC220V Current Ratio: Programmable Voltage Ratio: Programmable Wiring: 3 Phase 4 Line / 3 Phase 3 Line Accuracy Class: 0.5 Frequency Accuracy: ±0.02Hz Overload(voltage): 1.2 times(continued); 2 times /s(instantaneous) Overload(current): 1.2 times(continued); 10 times/5s(instantaneous) Power Consumption:

Manufacturer: LONGH Brand: LONGH Color: White

How to operate this LED tester: 1.  Plug in power,it will work after 3 to 5 seconds. 2.  The soft start mode makes the LED backlight getting brighter gradually. 3.  No burning out, if you aren't sure about the "+"and "-",don't connect the probes to the LED lamp for a long time. 4.  Open Circuit Protection : Don't touch the output terminal probes for a long time. 5.  Dual Isolated Design makes LED Lamp LED TV Backlight Tester safer with high strength and flame retardancy materials.

Manufacturer: SS-Tech Brand: SS-Tech

Applicable to any size LED TV , perfect backlight inspection and maintenance tool ! Model No: SID-GJ2C Input Voltage: 100-265V Output Voltage: 0-275V - Suitable for single LED beads, LED stirng, LED panel and Integrated optical LED - Support testing the capacitance voltage and the diode voltage - No need to disassemble panel to test the LED strips - Safe Protection: Double Isolated - Brun prtection: Voltage and Current Intelligent Adjustment - Safety design : Slow boost , soft start. Increase the current steadily. 1. Plug in power, it would be cost about 3 to 5 seconds to start 2. The soft start mode make the backlight getting brighter gradually 3. If you can't make sure which is"+"and "-", then not test for a long time 4. Don't touch the output terminal of probes for a long time 5. Retardancy materials: Double Isolate Design makes tester safety with high strength and flame

Manufacturer: Wiysond Brand: Wiysond

Feature: includes everything you need to build your very own, fully functional, digital oscilloscope. up to 5M samples/second, 8-bit resolution, up to 50Vpp max input voltage, and more! includes a semi-populated PCB, with all of the surface mount components already soldered. The components with all through-hole are easily soldered. This is on the higher end of difficulty as far as through-hole kits go. Specification: 9VDC power supply voltage

Manufacturer: EXSO Brand: EXT-1170N