Voltage Testers - Page 37

Manufacturer: Amprobe Brand: Amprobe Model: AM-530

Choice for Professional Electrical ContractorsView larger Perfect for a variety of electrical applicationsView larger The Choice for Professional Electrical Contractors The AM-530 True-rms Multimeter is the fully-featured choice for the professional electrical contractor. Measure and verify presence of voltage to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors or check transformers. The AM-530 is true-rms sensing to accurately measure voltage on systems affected by harmonics as well as a built-in flashlight to detect wire colors in the dark and non-contact voltage detection. Packed with Rich Features The AM-530 multimeter comes with a set of detachable test leads that measure AC/DC current to 10 amps, AC voltage to 750V, DC voltage to 1,000V, resistance to 40 megaohms, capacitance to 4,000 microfarads, frequency to 10 megahertz (MHz), and microamps. The meter comes with a K-type thermocouple probe for measuring temperature. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. A built-in flashlight allows the user to read component values, detect wire colors and read name tags in dark areas. The microamp reading identifies current changes in flame detector applications. The 4,000 microfarad capacitance rating is for testing run/start capacitors on motors. A liquid crystal display (LCD) shows readings both in digits and on a 41-segment bar graph. The display is backlit for visibility in low light. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of readings. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. The hold function keeps a reading on the display, even after the meter is disconnected. An audible continuity verifies voltage presence, and a diode test detects whether the circuit's diodes work properl...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700BCA

The Fluke 700BCA Bar code adapter has a shielded 4 conductor cable terminated with 9 pin D and 9 socket D subminiature connectors. The 700BCA provides pin translation and interconnection between a Fluke 743 documenting process calibrator and a Hewlett Packard HBSW 8200 bar code wand. 700BCA Includes interface cable for calibrator to bar code wand instruction sheet in English, German, French, Spanish, and Italian. Mechanical and general specifications size overall length approximately 15 cm warranty one year material black PVC cable and housings, tin plated shells, gold plated copper contacts.

Manufacturer: SOMOV WORLD Brand: SomovWorld Model: E-VD6910-3

Operate like a pro get rid of uncertainty once and for all SomovWorld non contact voltage tester is a professional tool but it is suitable also for non-professionals and dyers. It is a necessity for everyone to have it in the toolbox because it helps you make the first and the most important safety check. Our device is certified both CE and ROHS - a proof of the quality of its manufacture and performance and guarantee for the safe materials it is made from. You will enjoy the highest convenience with this small, reliable and pen size tool. SomovWorld non contact voltage tester is designed for non-contact detection of standard AC voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, wires. It is suitable for use in a wide range of areas including entertainment, communications, environmental control, etc. The care for the customers' satisfaction is what separates SomovWorld brand from all the other big competitors. The company's mission is to help people work with ease and confidence by providing products made with no compromise of quality and functionality.

Manufacturer: Fluke Corporation Brand: Fluke Model: C510

Premium leather case. For use with C510/WWG, C510 ELECT and Holds most Fluke digital multimeters, thermometers, and process calibrators. Large belt loop and top flap secure meter, material leather. Belt loop. 1 year warranty. Measures 11" width by 4" height by 7" depth.

Manufacturer: Identity Music Group Brand: Ideal Model: 61-744 Color: Ideal 600-amp Clamp-pro Clamp Meter

The IDEAL 61-744 Clamp-Pro Clamp Meter 600 Amp measures up to 600AC with auto/manual ranging. It has tapered jaws with a hook tip for a more secure clamp. The data hold keeps previous data and the tip of your fingers while the auto power off will keep you from setting your tester down and wearing out the battery. It is rated for CAT III -600-Volt and has a two year warranty. In 1916, J. Walter Becker started the Ideal Commutator Dresser Company of Chicago from his mother's kitchen. He manufactured commutator dresser stones with the belief that every product should be worth more than the price paid for it. Service, he said, was part of the product. That idea has been the core IDEAL business principle for over 90 years. Today, the many loyal distributors and customers that make IDEAL successful are a testament to Becker's original philosophy.

Manufacturer: KKmoon Brand: KKmoon

Specifications: Wave Form: sine / square(Adjustable Duty cycle) / triangle / sawtooth / impulse(Adjustable impulse width) / step wave  Frequency Range: Sine: 0-2MHz/0-5MHz/0-10MHz/0-12MHz (Optional) Square/triangle/sawtooth/impulse/TTL digital wave/other wave: 0-5MHz(Except the 2MHz Model) Resolution: 10mHz (0.01Hz)(At least) Frequency Error: ±5×10^(-6) Frequency Stability: ±1×10^(-6) Output Impedance: 50Ω±10% Wave Length: 2048 point Wave Sampling Rate: 200MSa/s Output Range: 10mVpp-20Vpp Built-in attenuation: -20dB, -40dB TTL Electrical Level: >5Vpp TTL Fan-out coefficient: >20 TTL Load External Measurement: Frequency Measuring Range: 1Hz-60MHz Counter Range:0-4294967295  Way: AC Coupling Voltage: DC 12V  AC/DC Adapter: input: 100-240V 50/60Hz   Output: DC 15V 2A Working condition: Temperature: 0-40℃  Humidity: ﹤80% Item Size: Approx.13 * 9 * 2.5cm / 5.12 * 3.54 * 0.98in Item Weight: 304g / 10.72oz Package Size: 22.5 * 15 * 7.5cm / 8.86 * 5.91 * 2.95in  Package Weight: 442.5g / 15.6ozNote: The last two number of the model represent the upper limit value of the frequency of sine wave. For example: SGP2102 means the output frequency of sine wave can reach to 2MHz.Package List: 1 * DDS Function Signal Generator 1 * DC/AC Adapter 1 * BNC Wire 1 * Accessory Set 

Manufacturer: STAMFORD Model: AVR MX341

Automatic Voltage Regulator AVR MX341 Product Description MX341 is a two phase sensed Automatic Voltage Regulator(AVR) and forms part of the exciation system for a brush-less generator. Excitation power is derived from a three-phase permanent magnet generator(PMG),to isolate the AVR control circuits from the effects of nonlinear loads and to reduce radio frequency interference on the generator terminals.sustained generator short circuit current is another feature of the PMG system. The AVR senses the voltage in the main generator winding and control the power fed to the exciter stator and hance the main rotor to maintain the generator output voltage within the specified limits,compensating for load sprrd,temperature and power factor of the generator The AVR has the faclity for droop CT connection,to allow parallel running with other similarly equipped generators. Technical Datas SENSING INPUT: Voltage: 190-264V AC max, 1phase, 2 wire Frequency: 50-60Hz nominal POWER INPUT(PMG) Voltage: 170-220V AC max, 3 phase, 3 wire Current: 3A/Phase Frequency: 100-120Hz nominal OUTPUT: Voltage: Max 120V DC Current: Continuous 3.7A Intermittent 6A for 10 secs Resistance: 15 ohms minimum REGULATION: +/-1%. NOTE: Please give us your phone number and postcode which is to ensure a smooth and safe delivery. And we can also send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Hantek Brand: MUW Model: CC-650

AC/DC frequency range: Up to 20 kHz Effective Measurement Range: 20mA to 650A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, youˇre able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement. Captured Conductor Size:9mm maximum Low Battery Indictor:red LED lighting Operating Temperature:0℃to 50℃70% R.H. Storage Temperature:-20℃ to +70℃, 80% R.H. Battery Type:9V DC, NEDA 1604, 6F22,0006P Battery Life:100 hours typical with alkaline Weight:250 gm typical Dimensions:195mm(H) x 70mm(W) x 33mm(D) Output:Supplied with coil cable with straight banana plug or BNC plug.

Manufacturer: Amprobe Brand: Amprobe Model: AM-560

The perfect choice for the HVAC technician Measure a complete range of electrical parameters Perfect for HVAC Applications The AM-560 Commercial HVAC Digital Multimeter is the perfect choice for the HVAC technician. It measures a complete range of electrical parameters for HVAC applications with dual thermocouples for taking differential temperature measurements, low pass filter for variable frequency drives, capacitance for motor startups or run capacitors, and microamps for flame sensors. Feature-Rich Digital Multimeter The Amprobe AM-560 Commercial HVAC Digital Multimeter (also known as a multitester) measures AC/DC voltage to 1,000V, AC/DC current from 600µA to 10A, frequency range of 60Hz to 60 MHz, resistance from 60Ω to 60 MΩ, capacitance 60nF to 60 mF, and temperature from -40°F to 1832°F (-40°C to 1000°C). It performs audible continuity tests and diode tests. Dual thermocouples allow for differential temperature measurements such as simultaneous temperature readings on the low and high side of an HVAC (heating, ventilation, and air conditioning) system. A low-pass filter allows users to read voltage and frequency on variable frequency drives. Built-in safety features include the low impedance mode and non-contact voltage detection, which verify the presence of voltage and stray voltage. This meter is manual and auto-ranging for user flexibility and a duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle. The meter has a data hold and a peak hold for specialized signal measurements as well as Max/min memory and a relative reading to take the difference between two measurements. The 6,000-count, dual function display is backlit for readability in low-light conditions and an on-screen analog bar graph detects noise. It provides a warning against improper test lead connections as well as a low battery warning. This meter meets safety standards for Category III to 1,000V and Category IV to 600V. It has a built-in flashlight, a r...

Manufacturer: Globe Warehouse Brand: Globe House Products

Product Description: This kit is for testing automotive pressurized cooling systems, it includes 8 radiator cap adapters for servicing all major car brands foreign & domestic. Large volume pump capacity reduces strokes required to pressurize cooling system. Self-locking quick disconnect components, thumb operated relief valve for convenient pressure release. Pressure Gauge Capacity: 0-35psi Hand Pump: 7" Length by 1-5/8" Diameter