|
|
-
4.4 of 5.0 with 9 Reviews
SALE PRICE: $84.99 1% OFF
Manufacturer: KKmoon
Brand: KKmoon
Manufacturer: KKmoon
Brand: KKmoon
Specifications Sine Wave: Normal Modes(Optional): 0Hz~6MHz / 0Hz~12MHz / 0Hz~20MHz / 0Hz~24MHz The Min. Frequency Resolution: 10mHz Frequency Accuracy: (+/-)5*10^(-6) Frequency Stability: (+/-)2*10^(-6)/3 Hours Phase Adjustment Range: 0~359° Phase Resolution: 1° Sine Wave: Harmonic Distortion ≤0.8% Square Wave: Rise/Fall Time: ≤20ns Overshoot: ≤7.5% Duty Cycle: 0.1%~99.9% Sawtooth Wave: Linearity: ≥98% (0.01Hz~10KHz) Pulse Wave: Pulse Width Adjusting Range: 10nS~1S Rise/Fall Time: ≤20ns TTL Output: Level Amplitude: >3Vpp Fan-out: >20 TTL Load Rise/Fall Time: ≤20ns CMOS Output: Low Level:
-
4.4 of 5.0 with 25 Reviews
SALE PRICE: $88.11 3% OFF
Manufacturer: Tenma
Brand: Tenma
Model: 72-7228
Manufacturer: Tenma
Brand: Tenma
Model: 72-7228
True RMS Clamp Meter Perfect for applications where higher accuracy is critical. This compact clamp meter measures AC/DC voltage, AC/DC current, resistance and frequency. 5999 count autoranging display Backlit display True RMS AC measurement AC surge current measurement 10MΩ input impedance Diode test Continuity buzzer Max hold Data hold Full icon display Sleep mode Low battery indicator Includes zipper case, test leads, owners manual Requires one 9V battery (292-035), included blank blankSpecifications: Mode Range Accuracy DC voltage 6.6V, 66V, 600V ±(0.8% +1) AC voltage 6.6V, 66V, 600V ±(1.2% +5) DC current 66A, 1000A ±(1.5% +8) AC current 66A, 1000A ±(2% +8) Resistance 660Ω, 6.6KΩ, 66KΩ, 660KΩ, 6.6MΩ, 66MΩ ±(1% +2) Frequency 660Hz ~ 66MHz ±(0.1% +3) Duty Cycle 0.1 ~ 99.9%blank Dimensions11.25" (H) x 4.13" (W) x 1.77" (D)blank
-
4.4 of 5.0 with 12 Reviews
SALE PRICE: $89.99
Manufacturer: SHINA
Brand: SHINA
Model: DSO211-us.
Manufacturer: SHINA
Brand: SHINA
Model: DSO211-us.
Product Description: DS0211 is a pocket size digital storage oscilloscope fulfils basic electronic engineering requirements. It is based on ARMCortex-M3 compatible 32 bit platform, equipped with 320*240 color display, SD card capability, USB connection and chargeable batteries. Weighs only 65g Portable Digital Oscilloscope DIY Kit provides waveform viewing, pocket size and over 2 hours battery operation.
-
4.4 of 5.0 with 15 Reviews
SALE PRICE: $92.06 24% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-20SW
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-20SW
|
The Amprobe ACD-20SW clamp meter measures voltage, current, resistance, capacitance, continuity, and temperature in electrical wires and cables up to 1.18in. (30mm) in diameter. This average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform. The clamp head swivels 180 degrees so that the display can be turned for greater readability and the jaw is designed for single-handed operation. The non-contact voltage indicators detects voltage from 70 to 600V AC, works on any range, and indicates the presence of alternating current (AC) voltage with a red indicator light and audible beep. The tester measures AC and direct current (DC) voltage up to 600V, AC current up to 400A, resistance up to 40 megaohms, and continuity up to 400 ohms. The unit is both autoranging and manually ranging, for quick tests and greater accuracy, respectively. The diode test function features a 1.2mA test current. The 3-3/4 LCD has a maximum reading of 3,999 and has a hold function. The tester is powered by two AAA batteries and has an auto-off function that turns the unit off after 10 minutes of idle time. The ACD-20SW is designed for use on electrical wiring and HVAC systems by electricians and electrical contractors. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 600V DC voltage range 0 to 600V AC current range 0 to 400A Resistance range 0 to 40 megaohms Continuity range 0 to 400 ohms Weight (including batteries) 1.26lb./157g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat III 600V Dimensions 12 x 5.3 x 1.2 inches / 306 x 135 x 30mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handh...
-
4.4 of 5.0 with 487 Reviews
SALE PRICE: $107.14 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX C3003
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX C3003
The CNX C3003 Modular 3-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case contains three adjustable compartments, suitable for the CNX Wireless Multimeter or any of the CNX remote measurement modules. An inner pocket holds test leads and other accessories.
-
4.4 of 5.0 with 15 Reviews
SALE PRICE: $107.22 29% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-21SW
Color: Multicolored
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-21SW
Color: Multicolored
|
The Amprobe ACD-21SW digital clamp meter with swivel clamp, non-contact voltage detector, and included temperature probe is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, resistance, and temperature in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 4 millifarads, and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,9...
-
4.4 of 5.0 with 39 Reviews
SALE PRICE: $158.07 31% OFF
Manufacturer: Zhangzhou Eastern Intelligent Meter Co.
Brand: all-sun
Model: EM480B
Manufacturer: Zhangzhou Eastern Intelligent Meter Co.
Brand: all-sun
Model: EM480B
|
This instrument is accurate,reliable and easy to operate. For insulation resistance test,you can change the test voltage among 250V,500V and 1000V. it can also be used to test ACV,resistance which is less than 200Ω, and test for continuity. You can use it to test transformer,motor,cable,switch,electrical appliance as well as to do insulation resistance test. Features 1.True measurement of speaker systems actual impedance at 1kHz 2.Three test ranges (20Ω / 200Ω / 2000Ω) allow testing of home theater and commercial sound systems. 3. Convenient protable battery operation. 4.Low battery indication 5. Data hold function 6.Timer function for easier operation. The timer can last about 30 seconds minutes after users press TEST button. 7. Auto power off: after about 15 minutes of non-use. Technical Specifications Display: LCD 3 1/2 digits (2000 counts), with unit Data Hold Indication: H symbol appears on the display Power supply: 9V DC (6 x 1.5V AA battery) (Not provided by seller) Accuracy is specified for a period of one year after calibration and at 18℃ to 28℃, with relative humidity
-
4.3 of 5.0 with 16 Reviews
SALE PRICE: $6.99 21% OFF
Manufacturer: Gardner Bender
Brand: Gardner Bender
Model: ET6204
Color: Yellows
Manufacturer: Gardner Bender
Brand: Gardner Bender
Model: ET6204
Color: Yellows
Sperry instruments, 4 range voltage tester, tests 80-480 vac/dc voltage, snap in probes spaced to fit standard 120V outlet, 4 hi vis indicators improve accuracy, soft grip, contoured design, hi impact ABS housing, pocket clip, limited lifetime warranty, Carded.
-
4.3 of 5.0 with 38 Reviews
SALE PRICE: $7.99
Manufacturer: REALACC
Brand: REALACC
Manufacturer: REALACC
Brand: REALACC
Features: Voltage detection pricision: 0.01V. Unit voltage display range: 0.5V-4.5V. Total voltage display range: 0.5V-36V. 1S test mode voltage range: 3.7v-30v. Low voltage alarm mode for 2-8S. Alarm set value range: OFF-2.7V-3.8V. Size: 3.9cm x 2.4cm x 0.9cm. For 1S-8S / Lipo / Li-ion / Li Mn / Li-Fe Battery. Package Included: 2 x Voltage Buzzer Alarm
-
4.3 of 5.0 with 20 Reviews
SALE PRICE: $9.65
Manufacturer: Yeeco
Brand: Yeeco
Model: 1300095
Color: White Shell Blue LCD 80-300V
Manufacturer: Yeeco
Brand: Yeeco
Model: 1300095
Color: White Shell Blue LCD 80-300V
|
AC 80-300V US plug LCD Digital voltmeter volt panel meter voltage tester gauge plug type digital voltmeter widely used in AC80-300V mains measurement. The instrument directly inserted in the flapper or plugged into a wall switch can display the current mains voltage (Family, office space, industrial and mining enterprises, etc.), The biggest advantage is that when you see the current voltage is too low or too high, you can choose to switch off the running of a household appliances or equipment, In order to effectively protect your home appliances and equipment life (You can also be a simple voltage test table). Potentiometer adjust: use screwdriver to open the outer case of the voltage meter use screwdriver in small size to adjust the potentiometer if display voltage is too high, adjust potentiometer in counter-clockwise if display voltage is too low, adjust potentiometer in clockwise packing including: 1x US plug LCD Digital voltmeter
|
|