Voltage Testers - Page 72

Manufacturer: Amprobe Brand: Amprobe Model: VPC-31

The Amprobe VPC-31 electrical tester is a non-contact voltage and continuity tester for measuring alternating current (AC) and direct current (DC) voltage and continuity on live electrical wiring. This average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. Three-digit, 1,000 count backlit LCD display for viewing in low-light conditions The tester measures AC and DC voltage up to 1000V and indicates ten common voltage levels for AC and ten for DC. The backlit LCD display indicates precise voltage measurement. An LED light and buzzer indicate continuity. A solenoid tester-like shaker indicates the presence of AC voltage. Bi-color LEDs indicate safe and dangerous voltages (above 55VDC or 30VAC). The tester is safety rated to European Standards 61010-1 Cat IV, 600V and Cat III, 1,000V. The ground fault circuit interrupter (GFCI) test feature allows the unit to test GFCI outlets and breakers. The casing is ingress protection (IP) treated to IP65 for complete protection against dust and water jets up to 6.3mm in diameter. The unit is autoranging on all ranges. It is powered by two AAA batteries (included). The VPC-31 is designed for use by electricians, electrical contractors, and mechanics. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 1,000V DC voltage range 0 to 1,000V AC current range 0 to 400A Weight (including batteries) 0.485lb./220g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat IV 600V and Cat III 1,000V Ingress Protection (IP) rating IP65, for protection against dust and water jets up to 6.3mm in diameter Dimensions 9.17x 2.24 x 1.57 inches / 233 x 57 x 40mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, re...

Manufacturer: Korins Inc. Brand: Korins Model: SEM3010A2 Color: Black

Features - Display monthly estimated cost/CO2 emission/power consumption. - Historical graphical chart of today & this week electricity consumption. - History of today, this week, this month, last 31days power consumption & cost. - Consists of in-home display and a companion transmitter, and sensor: Current Sensor: Just clamp on the fire wire to measure the current with electromagnetic induction. Transmitter: transfer the data from current sensor to the Monitor with 433MHz wireless signal. Monitor: Receive the realtime data from the transmitter, display readable parameters,such as electricity consumption, cost, and historical consumption chart & graph to you. - Time and calendar function. - Display currencies(Apply currency of your country): ￡, $, €, ￥, ￦ - An audible & lcd alarm display for excessive electricity consumption. - Data storage capacity on lcd monitor: 5 years. - Each section of up to 6 tiers & time can be applied to progressive cost & tax. - Single, two-phase or three-phase system compatible. Specifications - Wireless signalfrequency: 433MHz; - Wireless transmission distance: Max 50m; - Electricity monitor measuring range: 10W ~ 100kW (single phase); - External power: 5V DC for display (micro USB); - Operatingtemperature: -22℉ ~ 140℉; - Sensor Coding Recognition: 10 channel (each three clamp input potential) Parameters - Dimension: 176 x 124 x 31mm for receiver; 111 x 68 x 42mm for transmitter; -Internal diameter of the CT Clamp: 9.5mm - Electricity measuring accuracy: >97%; -Measuring current: 100mA-30A (per 1CT); -Voltage setting:100~250vAC; -Transmittersample rate: 6s; -Transmitterrange 433MHz transmission range exceeds 50 meters at sight; -Carbon ration:0.5kg CO2/KWH; -Monitor Battery life: 3 days. (3pcs Alkaline AA type) -Transmitter Battery life: 10 months. (2pcs Alkaline C type)

Manufacturer: SIENOC Brand: SIENOC

New LED Light Non-contact Ac Electric Voltage Tester Volt Alert Pen Detector Sensor 90-1000v. The next generation Volt Alert AC non-contact voltage testers are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there is voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Manufacturer: DROK Brand: DROK

Feature: Range: DC 0-600V (Need Extra Power Supply) Power Supply: 9-12V Backlight colors: Blue Power Consumption: < 0.2VA Resolution: 0.5% ±2 digit Cutting Size: 76x39 mm Dimensions: 79x43x25 mm Wiring: 1 & 2: Power Supply Port (Do not distinguish between positive and negative, Can Input Directly) 3 & 4: Measure Port (If Reversed will display Negative number, With reverse polarity protection) Package Includes: 1x Digital Voltmeter

Manufacturer: Fluke Corporation Brand: Fluke Model: L206

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need. 3 super bright white LED's. 360 degree rotating clip. Special hard-hat attachment included. 40-hour battery life. Water resistant. Durable polymer construction. Rubber shielded Bezel. Also includes a neck lanyard. Hats not included with Deluxe LED Hat Light L206.

Manufacturer: RioRand Brand: RioRand Model: RRAPLQGASRABONNN

Basic Parameters: Dimension:110x65x40mm Adaptable Voltage: AC 110-220V/ 50Hz Power: 1-3000W (can display running power less than 1W) Electricity consumption: 0.0001-999.9 kWh Electricity cost : 0-9999 $ Ratio of operation condition: 0-100% Running time: 0-60 minutes to 24 hours to 999 days Peak load: 15A Measurement accuracy: +/- 1% Refresh rate: more than one time per second Operating Temperature: -10-60 °c Humidity:10-95% RH Display units: AC voltage: xxxx V Accumulated Electricity consumption: xxx.x kWh Accumulated electricity cost: xx.xx $ Running power: xxx.x W Ratio of operation condition: xxx% Time:xx:xx(hours:minutes); xxx D(days) Applications: Voltage measurement for power supply Check electricity consumption Measure real-time running power Check electricity cost Monitor operation condition of electricity appliance Check running time of electricity appliance (please refer to the user manual for more details) Precautions: Limit to indoor use, -10-60 °c, 10-95% RH This product should not be used for a long time with appliance 2000W, the continuous working time is preferably less than 1 hour Please don't long press the "UP" and "DOWN" simultaneously, this would be irreversible reduce power monitoring accuracy Package includes: 1x Multi-function Power Meter UK Plug 1x English User Manual

Manufacturer: Sinometer Brand: Sinometer Model: DCY25

Important Notice: You have to touch the button on the end of the tester to make a loop to take the test ! How to use: 1. To check the voltage, hold the end button which is a ground and connect the tip to the point you want to check, the display will show the voltage range immediately. 2. To identify the wires, hold the second button ( close to LCD) , when the wire is detected, A spark sign will show on the display area. 3. To check a broken point on a wire, just following the hot wire with spark sign on, when the spark sign disappears, there is a broken point on the wire. It will become handy when you check your holiday lights. Just Be Careful: You need to touch the end of the meter to read, the rear end is the ground, if you do not touch it, there is No loop on the thing to see the LCD sign.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: UTL291

AC Amps: 600A; AC Volts: 600V; Auto Power Off: Y; Autoranging: Y; Backlit Display: Y; Batteries: 2 AAA; Capacitance: 60mF; Data Hold: Y; DC Volts: 600V; Diode: Y; Display: 6,000 Count; Frequency/Duty Cycle: Y; Manual Ranging: Y; Resistance/Continuity: 60M Ohms; Safety Rating: Cat III 600V; Temp.: -4DegreeF to +1832DegreeF.

Manufacturer: EISCO Brand: NEULOG Model: NUL201

NeuLog logger sensor measures voltages, and can be used with Van de Graaff generators, fuel cells, batteries, and parallel and series circuits for further study. The logger sensor has power and ground wires with 4.0mm plugs to connect to electric circuits, and is attachable to the NUL 202 current logger sensor to study current dependence on voltage in various electric circuits (sensor sold separately). The logger sensor has an experiment duration of 50.0 milliseconds to 31.0 days, and 15.0-bit analog-to-digital converter (ADC) resolution for reading a range of values. The logger sensor measures low-voltage AC and DC circuits and, with a step-down transformer, can measure the AC voltage of the main supply and check its frequency up to 50.0/60.0Hz. (Transformer sold separately; the sensor’s input is limited to 60.0Hz and +/-20.0V maximum.) The voltage logger sensor can be used for physics, electronics, chemistry, and biology experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficienc...

Manufacturer: Fluke Corporation Brand: Fluke Model: FTP-1

SureGrip fused test probes with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes mount onto any standard modular test leads, for instance the Fluke TL221, TL222, or TL224. Rated to CAT III 1000V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection. Fluke fuse part number 803293, 1000V, 11A with 20 kA interrupt rating. Probes allow indication of live voltage even with blown fuse. 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads. CAT III 1000 V, CAT IV 600 V, 10 A rating. -20 to 50 degree C operating temperature. CSA certified. One year warranty.