Voltage Testers - Page 73

Manufacturer: Fluke Corporation Brand: Fluke Model: FTPL-1 Color: Black/Red

SureGrip fused test probe and test lead set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating. Fluke fuse part number 803293. 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads. TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone - insulated wire resists heat and cold. -20 to 50 degree C operating temperature. CAT III 1000 V, CAT IV 600 V, 10 A rating. One year warranty. Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. Current mode is non-functional with blown fuse.

Manufacturer: Extech Brand: Extech Model: 382099

Voltage Test Leads with Alligator Clips (4 leads) for Model 382090

Manufacturer: Pyle Brand: Pyle Model: PMD24

The PMD24 uses electronic signals to locate the exact position of studs, AC wires and metal through drywall, concrete and other common materials. Once the edge of a stud has been detected, the PMD24 emits audio and visual signals (LED Display) that allow you to narrow in on the center of the stud. The PMD24 locates metal objects and live conductors as well. Felt cushioning allows the PMD24 to easily slide across walls without damage. The visual and audible indicators alert you to the presence of conductive metal or live voltage. Ideal for use in the field or at home. Adjustable sensitivity for detecting studs or metal/voltage. Powered by 9V battery (not included)

Manufacturer: Floureon Brand: Floureon Model: TS-838

Features: Measures various parameters: power (W), energy (kWh), volts, amps, hertz, power factor and maximum power (W), time, days - kWh is vital as this is what your electricity bills are based on! Overload Protection Function, overload warning Large, clear LCD display for easy reading (screen dimension: 50mm x 43mm) Cumulative Kilowatt-Hour Monitor Calculates electricity expenses Electricity price setting by pressing SET, VALUE, DISPLAY Can also set energy Price for night separately Sets electricity price value which ranges 0.000COST/KWH ~9.999COST/KWH Low power consumption Power supply: 2*1.5V Button cell backup - allows meter to be moved (and viewed) without losing readings. NO Backlight Specifications£º Overload Protection Function: When the whole power exceeds the rated power of monitor, the monitor will cut off the current and prevent being damaged Operating voltage: 120VAC Frequency display: 50/60HZ Operating current: max 15A Wide voltage range: 110V-130V Wattage display (Watts) is 0~1800W -Current range: 0.01A~19.99A Resolution: 0.5W Indication of frequency: 46-65HZ Measurement of consumption: 0.00 to 9999.99 KWh Duration of indication: up to 9,999 hours 59 minutes 3-pin US plug Package Inlcuded: 2X Power Meter(US Plug) NOTE: 1. The Button battery is used to keep the data when not using the monitor. When the button battery is used up, and you plug out the monitor from the outlet, the data in the monitor and the previous setting will disappear. 2.If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this, please press the RESET button.

Manufacturer: DROK Brand: DROK Color: White

Basic Parameters: Dimension:110x65x40mm Adaptable Voltage: AC 160-280V/ 50Hz Power: 1-3000W (can display running power less than 1W) Electricity consumption: 0.0001-999.9 kWh Electricity cost : 0-9999 $ Ratio of operation condition: 0-100% Running time: 0-60 minutes to 24 hours to 999 days Peak load: 15A Measurement accuracy: +/- 1% Refresh rate: more than one time per second Operating Temperature: -10-60 °c Humidity:10-95% RH   Display units: AC voltage: xxxx V Accumulated Electricity consumption: xxx.x kWh Accumulated electricity cost: xx.xx $ Running power: xxx.x W Ratio of operation condition: xxx% Time:xx:xx(hours:minutes); xxx D(days)   Applications: Voltage measurement for power supply Check electricity consumption Measure real-time running power Check electricity cost Monitor operation condition of electricity appliance Check running time of electricity appliance (please refer to the user manual for more details)   Precautions: Limit to indoor use, -10-60 °c, 10-95% RH This product should not be used for a long time with appliance 2000W, the continuous working time is preferably less than 1 hour Please don't long press the "UP" and "DOWN" simultaneously, this would be irreversible reduce power monitoring accuracy   Package includes: 1x Multi-function Power Meter Australia Plug 1x English User Manual

Manufacturer: Fluke Corporation Brand: Fluke Model: L207

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap. Cap adjusts for all-day comfort. Light attaches to bill of baseball cap. Rugged light withstands 6' drops to concrete. Waterproof light case won't crack or chip. Electrically and thermally nonconductive.

Manufacturer: Amprobe Brand: Amprobe Model: VPC-30

The Amprobe VPC-30 electrical tester is a non-contact voltage and continuity tester for measuring alternating current (AC) and direct current (DC) voltage and continuity on live electrical wiring. This average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The ground fault circuit interrupter (GFCI) test feature allows the unit to test GFCI outlets and breakers. The tester measures AC and DC voltage up to 1000V and indicates ten common voltage levels for AC and ten for DC. The backlit LCD display indicates precise voltage measurement. An LED light and buzzer indicate continuity. A solenoid tester-like shaker indicates the presence of AC voltage. Bi-color LEDs indicate safe and dangerous voltages (above 55VDC or 30VAC). The tester is safety rated to European Standards 61010-1 Cat IV, 600V and Cat III, 1,000V. The casing is ingress protection (IP) treated to IP65 for complete protection against dust and water jets up to 6.3mm in diameter. The unit is autoranging on all ranges. It is powered by two AAA batteries (included). The VPC-30 is designed for use by electricians, electrical contractors, and mechanics. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 1,000V DC voltage range 0 to 1,000V AC current range 0 to 400A Weight (including batteries) 0.485lb./220g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat IV 600V and Cat III 1,000V Ingress Protection (IP) rating IP65, for protection against dust and water jets up to 6.3mm in diameter Dimensions 9.17x 2.24 x 1.57 inches / 233 x 57 x 40mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, ...

Manufacturer: Greenlee Brand: Greenlee Model: GT-220

GREENLEE COMMUNICATIONS GT-220 TESTER, ELECTRICAL-1000 V (GT-220)

Manufacturer: SAMPO Brand: Sampo

Features:The internal resistance is measured with the international standard AC signal (1000Hz¡À10%) by means of four-wire method to ensure the impact of the test probe of the contact resistance of the instrument, the wire and battery output terminal on the measured value, and the battery voltage can also be measured at the same timeIt is applicable for measurement of internal resistances of Lithium-ion, nickel-hydroxide, lithium-manganese cells or assembled battery3 1/2 digits 18mm LCD Display, high visible and backlightSpecifications:Voltage Measurement Range: 0 to 1.999V, 2 to 19.99V, 20 to 100VVoltage resolution: (0 to 1.999V)1mV, (2 to 19.99V)10mV, (20 to 100V)100mVInternal Resistance Measurement Range: 0 to 199.9m ohms, 200 to 1,999m ohms, 2 to 19.99 ohmsInternal Resistance Resolution: (0 to 199.9m ohms)0.1m ohms, (200 to 1,999m ohms)1m ohms, (2 to 19.99 ohms)10m ohmsSKU: X1IN10177Package includes:1 * Voltmeter Of Internal Battery Resistance1 * User Manual

Manufacturer: Ruby Electronics Brand: Ruby Electronics Model: CEM Color: Dark Gray, Red & Yellow

This is a brand new CEM DT-3348 CE certified digital clamp-on AC/DC meter. DT-3348 Professional True RMS Clamp Meter provides accurate AC/DC Current, Voltage and Wattage readings regardless of waveforms. This meter should be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform. This meter is CAT III 600V rated. It also measures frequency and resistance. It comes with a heavy duty carrying case to protect your device when working in the field.