Airflow & Air Quality - Page 10

Manufacturer: Fluke Corporation Brand: Fluke Model: BP7235

Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.

Manufacturer: Extech Instruments Brand: Extech Model: CO200

What's Included: AC adapter. Monitor air quality in schools, office buildings, greenhouses, factories, and anywhere that carbon dioxide is a concern Measures and displays carbon dioxide concentration, air temperature and humidity Captures min/max; press RESET to clear memory Displays the year, month, date, and time of day Audible alarm sounds when carbon dioxide levels exceed the set point Activates an alarm relay that can be used for connection to an external indicating or controlling device

Manufacturer: NK Kestrel Brand: Kestrel Model: 0850BLK Color: Black

Wind speed, humidity, barometric pressure and density altitude plus logging capabilities - the indispensable tool for portable environmental monitoring. Purchase the Kestrel 5100 Racing Weather Meter with LiNK and monitor conditions remotely and export data logs with the free Kestrel LiNK App.

Manufacturer: Extech Brand: Extech Model: 407910

What's included: two quick-disconnect fittings, one 9 V battery, and a protective rubber holster with stand. Records maximum and minminum readings into memory for recall Dual-differential inputs with internal sensors. Eight display units of mbar, psi, kg/cm2, mmHg, "Hg, mH2O, "H2O, and atm. Data hold and automatic power off. Zero function for offset measurements. Metal input connections with two quick-disconnect fittings. RS-232 interface-cable and software sold separately

Manufacturer: Kestrel Meters Brand: Kestrel Model: 0851RED

Make those last minute dial-in or turning decisions count with the Kestrel 5100. Measure weather where it really matters - at the track! Purchase the Kestrel 5100 Racing Weather Meter with LiNK and monitor conditions remotely and export data logs with the free Kestrel LiNK App.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-566

These infrared thermometers are extremely easy to use: just aim, pull the trigger, and read the display. The backlit display shows temperature readings in °F or °C; low-battery indication; and hold, scan, and max. Display holds for seven seconds. Under range and over-range conditions are also indicated on the display. Available for sale in the United States and Canada only. Fluke models 566 and 568 offer additional features including an innovative graphical display, adjustable emissivity through an easily selectable built-in material table , type K thermocouple input, datalogging, multiple language interface, two backlighting levels, and a rubberized housing that improve resistance to shock, damage, water, and dust. These meters also indicate min/max, dif, avg, two color flashing with audio high and low alarms, probe, log, and recall. The 568 has expanded datalogging capabilities, with internal memory for up to 99 datapoints, or unlimited datapoints through the USB interface direct to your PC. Easy trend analyze can be done through the use of FlukeView software. Ideal for maintenance diagnostics in demanding environments Laser targets your measurement area. For special surfaces such as concrete all Fluke models have adjustable emissivity (except Fluke 63)

Manufacturer: Fluke Corporation Brand: Fluke Model: 4144616

Fluke low energy universal battery charger.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-FP PLUS Color: White

The Fluke FoodPro Plus dual infrared and RTD thermometer takes noncontact or contact temperature measurement and is used to monitor the temperatures of food products and foodservice equipment. This thermometer measures surface temperature from -35 to +275 degrees C (-31 to +527 degrees F) with an infrared sensor and measures internal temperatures from -40 to +200 degrees C (-40 to +392 degrees F) with a built-in fold-out resistance temperature detector (RTD) probe sensor. It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.The Fluke FoodPro Plus shows the maximum temperature for reference. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It has an integrated countdown timer and alarm to help monitor cooking and cooling intervals and food service line inspections. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with one 9V battery, a soft case, a calibration certificate with National Institute of Standards and Technology (NIST) traceability and the German Calibration Service (Deutscher Kalibrierdienst, DKD) traceability, and instructions. SpecificationsInfrared temperature range-35 to +275 degrees C (-31 to +527 degrees F)Infrared sensor accuracy0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degreeDistance-to-spot ratio2.5:1Infrared se...

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840081C

Ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Portable, and weighing only 5 oz. (150 g) including the battery, these meters are convenient for use in the lab, field or factory. Reads gauge, and differential min/max, hold, and auto power off functions. The RS232 port enables communication with a computer. High accuracy of ±0.3% fs at 25ºC, repeatability: ±0.2% (max ±0.5%) FSO, and combined linearity and hysteresis: ±0.2 (Max ±1.0%) FSO. All Sper Scientific Manometers come ready to use with connection hose, instructions, and a 9V battery, in a hard shell carrying case. Comes with a N.I.S.T. traceable certificate of calibration. Dimensions: 7⅛" × 2¾" × 1" (182 × 72 × 30 mm) Weight: 5 oz. (150 g).

Manufacturer: Reed Brand: REED Instruments Model: YK-80AM

The Reed YK-80AM anemometer with metal vane probe for heavy duty use measures air velocity in m/s, fpm, knots, mph, and km/h, and air temperature in degrees C and F, and has digital functions including record and hold for analyzing air flow. Record function captures and displays minimum and maximum readings. Hold function freezes a reading on the display to aid documentation. An RS-232 serial port interface output allows connection to a compatible PC for storing data (interface cable sold separately). The LCD shows air velocity and temperature readings simultaneously. The unit turns off automatically after 10 minutes of non-use to conserve battery life and has a low-battery indicator. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.4 to 35.0 m/s; 79 to 6,890 fpm; 0.8 to 68.0 knots; 0.9 to 78.3 mph; 1.4 to 126.0 km/hAir velocity resolution0.1 m/s; 1 fpm; 0.1 knots; 0.1 mph; 0.1 km/hAir velocity accuracy+ or - (2% of reading + 2 digits)Air temperature range0 to 60 degrees C/32 to 140 degrees FOperating environmentUp to 80% relative humidity; Meter: 0 to 50 degrees C/32 to 122 degrees F; Vane Probe: 0 to 80 degrees C/32 to 176 degrees FPower(1) 9V battery (included)Vane diameter72 mmMain unit dimensions (H x W x D)200 x 68 x 30 mm/8 x 2.7 x 1.2 inchesWeight220 g/7.75 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. The most common types of anemometer are cup, vane, hot-wire, and Pitot tube. Cup and vane anemometers calc...