Motion, Speed & Force - Page 161

Manufacturer: Mountz Brand: Mountz

Mountz QTC 55 Torque Analyzer

Manufacturer: TENMA Brand: Tenma Model: 72-7601

TENMA 72-7601 STROBOSCOPE, 0.083 TO 208HZ, 1%

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6206-010

The Monarch 6206-010 Nova-Strobe 115V AC line-powered digital stroboscope has a xenon flash tube, a 30 to 10,000 flashes per minute (FPM) range, internal phase shifting, and continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has an auto-adjustable 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a flash rate range of 30 to 10,000 FPM and a flash rate accuracy of 0.002% of setting, or + or - least significant digit/0.01 for use in slow-to-medium speed applications. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal phase shift functionality allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments. The built-in 1/4" - 20 UNF (Unified Fine) thread mount, continuous duty cycle, and 115V AC power source provide long-term use in permanent installations without the need for cool-down periods. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash rate range30 to 10,000 FPM/RPMFlash rate accuracy0.002% of setting or + or - least significant digit/0.01 FPMFlash duration8 to 20 microseconds/230mJoules up to 3450 FPMFlashtubeXenon with 100-million flash life spanAverage Power>13 W above 3450 FPMDisplay6-digit LCDDuty cycleContinuousFlash rate resolution1 FPMPower supply115V AC, 50 to 400 HzDimensionsBody: 3.66 x 3.56 x 9"/93 x 90 x 229mmReflector housing: 4.8"/122mm diameterHandle: 4.25"/108mmWeight1.5lbH is height, the vertical distance from the lowest to highest point; W is width, the hori...

Manufacturer: FW Murphy Brand: FW Murphy

Powerview PV101-A for Tier 4/Euro Stage IV (PV101-C).

Manufacturer: Reed Brand: REED Instruments Model: DT-1236L

The Reed DT-1236L portable contact/noncontact tachometer measures up to 99,999rpm, has a laser beam for noncontact measurements and an LCD screen. This contact/noncontact portable tachometer is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed from 10 to 99,999rpm for noncontact measurements, and from 0.5 to 19,999rpm for contact measurements, with + or - 0.05% accuracy. It measures surface speed from 0.5 to 1,999.9m/min. Its optical sensor is a laser beam that works at a distance from 50 to 2,000mm for user safety. The LCD screen presents test results and the unit of measurement, and it can store maximum, minimum, and last test result values for ease of data recall. The CE mark indicates compliance with applicable EU directives. It comes with two cone contact adapters, one funnel contact adapter, a surface speed wheel, reflective tape, batteries, and a hard-sided carrying case. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments.SpecificationsNoncontact range10 to 99,999rpmContact range0.5 to 19,999rpmSurface speed range0.5 to 1,999.9mpmAccuracy+/-0.05%Noncontact/contact resolution0.1rpm less than or equal to 999.9rpm; 1rpm greater than 1,000rpmSurface speed resolution0.01mpm less than or equal to 99.99mpm; 0.1mpm greater than 100mpmOperating distance50 to 2,000mmLaserClass 2 red laser diode, 645nm wavelengthPower(4) AA batteriesDimensions8.5 x 2.6 x 1.5 inches/215 x 65 x 38mm (H x W x D)Weight9.9 oz./280gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come wi...

Manufacturer: Mark-10 Brand: Mark-10 Model: G1074

General purpose vise, for a wide range of tension and compression testing applications.

Manufacturer: YIBIAO Brand: LINGZHUANG

h11 modified car LCD instrument meter car assembly car dashboard LCD odometer dial (19736897725) (104881182)

Manufacturer: Nextech Global Co., Ltd. Brand: Nextech Model: DFS50

DFS-Series digital force gauges are cost-effective tension and compression testing tools. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 11 to 2200 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.

Manufacturer: Imada Brand: Imada

The WC-30 Wire Wrapping Grip, 110 lb capacity ( Imada Force Gauge Attachments ) is ideal for test strength of wires, filaments, fibers, etc.

Manufacturer: Mountz Brand: Mountz

Mountz TLS 1360 S/D (10-120 lbf.In)