Motion, Speed & Force - Page 201

Manufacturer: Mark-10 Brand: Mark-10

The M3IE Advanced Digital Force Gauge / Torque Indicator, 220V Europe is designed to work with a wide range of Mark-10 remote force and torque sensors (see page 3). With exclusive Plug & Test technology, all calibration and configuration data is saved within the sensors smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with the advanced 5i force / torque indicator.The 3i shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Manufacturer: Checkline Brand: Checkline Model: PK2X

Flash Range: 30 - 12,500 RPM/FPM The PK2X hand-held Pocket Strobe® is convenient and accurate device to perform non-contact RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts/machinery by "freezing" or "slowing down" the action. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. A slow motion effect is accomplished with a slight mismatch of the relative speeds. The PK2X is powered by a rechargeable internal battery or directly from an AC power source allowing for continuous use if necessary, or continued use when the battery charge is low. It small size, lightweight design makes it perfect for use by field technicians or maintenance personnel. The new PK2X offer significant improvements from the previous generation model PK2 including the following (refer to table below): • 50% improvement in flash brightness • 100% improvement in battery run-time • Doubles the choice of power by permitting operation during re-charge or continuous operation when connected to AC-power This new model continues to offer the highest reliability, refined by over 10-years of continuous design & manufacturing improvements since the introduction of the original Pocket Strobe Model PK1 was introduced in 1996. The PK2X requires only one hand to operate, yet delivers performance comparable to much larger and heavier "pistol-grip" type models. It is ideal for industrial, laboratory, R&D and academic environments. Its small size and excellent performance provide superior convenience and value - at a reasonable price. Includes Strobe, Universal AC-Adapter/Charger and External Trigger Jack in Carrying Case with Traceable Calibration Certificate.   Features Internal rechargeable Lithium Ion battery uses latest "smart-charge" technology for longest possible life and 2-Hour run-time on a single charge Bright XENON flash intensity (over 120

Manufacturer: COLE-PARMER Brand: J.H. Williams Tool Group

This is a small compact and accurate electronic meter capable of acquiring data from a variety of torque sensors and logging values into memory. It has been designed to be used for torque verification in assembly and manufacturing. The unit can be used for auditing and process reporting while giving statistical process control (SPC) of stored data. It can can also be used with in-line transducers resulting in the accuracies associated with assembling with an electronic torque wrench.

Manufacturer: Shimpo Brand: Shimpo Model: FGE-20XY

The Series FGE-XY Digital Force Gauges combine a rugged, ergonomic and compact design with exceptional accuracy to provide a solid force testing instrument. These instruments are utilized in a variety of applications such as, incoming quality inspection, finished goods testing, R&D or almost any portable or force stand testing requirement. Simple one button adjustment alters units, while pressing the peak button quickly produces the highest recorded value during the test. The 180° reversible display combined with the adjustable force direction and dual labeled keypad enable the FGE-XY to excel in both compression and tension applications in any direction. Models are available from 0.5 lbs to 200 lb ranges providing a large offering for various testing requirements. Typical applications include wallboard, wire pull, wire crimps, trigger pull, brake pedal, aerospace ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Manufacturer: Mark-10 Brand: Mark-10 Model: M3-50

Series 3 basic digital force gauges feature a sampling rate of 2,000 Hz and ±0.3% accuracy, ideal for numerous applications in virtually every industry. Set point indicators with outputs are useful for visual pass/fail testing, while an analog load bar provides graphical representation of applied load. Ultra-compact, reversible housing allows for flexibility in many mounting configurations with space constraints.

Manufacturer: COLE-PARMER Brand: Mark-10

These digital force gauges are designed for tension and compression force testing applications. The gauges feature a sampling rate of 2000 Hz, producing accurate results under a wide range of test conditions. The easy-to-use menu driven interface and backlit LCD with large characters makes accessing the gauges' features and configurable parameters simple. Gauges include MESURTMLite and MESURgauge demo data acquisition software and a USB port for conveniently downloading data to a PC for further analysis and report tabulation. Units feature set point indicators for pass/fail testing and are housed in an ergonomic, reversible aluminum housing that allows for hand held or test stand mounting applications. What's Included: MESUR Lite and MESURgauge demo software, USB cable with driver, hook, flat, v-groove, chisel, cone, extension rod, cushioned carrying case, one 8.4 V rechargeable battery, AC adapter, and a calibration document supplied by the manufacturer. Compact, economical gauges for handheld or test stand applications High speed 2,000 Hz peak sampling rate USB data output Backlit graphic display with large digits Live load bar graph with audio/visual overload alarms Programmable go/no go limits, with audio/visual alarms Peak readings always shown on display Ergonomic, reversible housing for hand held or test stand use

Manufacturer: Hioki Brand: Hioki Model: FT3406

Manufacturer: Mark-10 Brand: Mark-10

The SS200 Rugged S-beamTension and Compression Force Sensor, Cap 200 lb / 100 kg / 1000 N is a rugged force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid steel construction ensures many years of use in factory or laboratory environments.

Manufacturer: Mark-10 Brand: Mark-10

Calibration Kit for TT01 Cap Torque Testers This calibration kit is designed to permit the field calibration of any Series TT01 torque tester or certain Series R53 torque sensors, as well as legacy Series CTA, STB, and STBA. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights, as follows: Includes: Right-angle bench mounting bracket Cable with looped ends Attachment, cable to torque tester Set of hardware Note: Weights are not available from Mark-10.

Manufacturer: COLE-PARMER Brand: Shimpo Model: FG-7004

Versatile gauge provides fast sampling results and great accuracy with a 1000 Hz sampling rate and ±0.2% accuracy full-scale. Internal memory of 1000 data points can be separated into groups allowing multiple tests to be recorded without interruption. Free data logging and graphing software can be used to transfer results to a PC for storage or further analysis, and set the gauge sampling rate from 0 to 60 readings per second. Additional features include high/low set points with audible and visual alarms, and a comparator output for production line integration. Gauge has three operation modes: track, peak, and auto peak. Track mode is for real-time readings. Peak mode is for displaying the peak reading, which will display until a higher reading is measured. Auto peak mode is similar to peak mode, but the display will reset after a programmed time period. Gauge body is ergonomically designed for handheld use, and made of aluminum for rugged use in a test stand. Display auto-rotates 180° to be easily seen from either position. Large, backlit display auto-rotates 180° to be easily read from either position. Plus the compression/tension icons and dual-labeled keypad allow for instant switching from push to pull testing for portable or test stand operation. What's Included: six tip attachments (hook, flat, conical, chisel, notched, and tip extension shaft), USB cable, padded carrying case, rechargeable 3.6V NiMH batteries, AC adapter/charger, and calibration document provided by the manufacturer. Free software available via download. Use as a portable gauge or mount on a test stand-the display automatically rotates 180° for easy reading in either position Measure tension and compression in three modes: track, peak, or auto-peak Integrate gauge into a quality system using the comparator output for repetitive pass/fail results Simple data logging at the push of a button or set for continuous data storage Log data to a computer, or optional printer, with the