|
|
-
3.5 of 5.0 with 8 Reviews
SALE PRICE: $979.00 1% OFF
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-311J
Manufacturer: Shimpo
Brand: Shimpo
Model: DT-311J
|
The Shimpo DT-311J heavy duty digital stroboscope has a xenon flash tube, a 200 to 1,500 flashes per minute (FPM) flash range, and is Ingress Protection 65 (IP65) rated in harsh conditions. It is designed for motion analysis, preventive maintenance, and speed measurement of repetitive motion in harsh or wet environments including textile, weaving, and printing industries. The stroboscope is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. The xenon flash tube provides crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Internal and external trigger modes have a 200 to 1,500 FPM range and an accuracy of + or - 1 digit. An alarm indicates an out-of-range speed below 200 or above 1,500 RPM. External mode features include automatic synchronization, phase shift, tachometer mode (RPM), and divide ratio selection. Divide ratios of 1/1, 1/2, 1/3, 1/4, and 2/4 enable the operator to distinguish true RPM from harmonics. Phase shift has a range of 0 to 359 degrees in one-degree increments to enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The National Electrical Manufacturers Association (NEMA) 4X housing is IP65 rated against airborne particles, water, and corrosive agents. Shock-absorbing components provide protection in harsh environments. The stroboscope is 115V AC line powered and includes a 6m/19.68ft input and power cable with a connector, a rubber strobe guard with handle, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash range (internal and external)200 to 1,500 FPMAccuracy+ or - 1 digitInternal mode featuresFlash rate adjustmentExternal mode featuresA...
-
3.5 of 5.0 with 36 Reviews
SALE PRICE: $990.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series 4
Manufacturer: Mark-10
Brand: Mark-10
Model: Series 4
|
Series 4 Performance Digital Force Gauge with 5/16-18 UNC Thread, 500 lbF / 8000 ozF / 250 kgF / 2500 N / 2.5 kN Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry. The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is 0.2% of full scale, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges' many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. Includes: Carrying case chisel cone V-groove hook flat extension rod universal voltage AC adapter battery quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation. Features: High-speed 3,000 Hz sampling rate USB, RS-232, Mitutoyo, and analog outputs Large backlit gr
-
3.5 of 5.0 with 12 Reviews
SALE PRICE: $995.00
Manufacturer: Checkline
Brand: Checkline
Model: TT-QC-100i
Manufacturer: Checkline
Brand: Checkline
Model: TT-QC-100i
Range: 10 - 100 Lb-in
Drive Size: 1/4"
Run-Down Fixture: Included
Simple bench mount tester for quick tool verification.
For testing click, dial, and digital wrenches, plus most power tools including impulse and electric drivers.
Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metrology grade tester.
A unique rotating display and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations. It is ideal for switching between pistol grip and inline tool checking.
The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.
-
3.5 of 5.0 with 30 Reviews
SALE PRICE: $995.00 1% OFF
Manufacturer: Chatillon
Brand: ScalesGalore
Manufacturer: Chatillon
Brand: ScalesGalore
The Chatillon DFE force gauge features an integral loadcell with accuracy >= 0.25% full scale. With normal and peak readings, high / low limits, setpoints, pass / fail results, statistical results, loadcell actuation and direction. Loads are displayed in oz, g, lb, kg and N units. The display can be inverted and displayed results may be "hidden" from the operator.
-
3.5 of 5.0 with 20 Reviews
SALE PRICE: $999.00
Manufacturer: Gowe Ltd
Brand: Gowe
Manufacturer: Gowe Ltd
Brand: Gowe
Don't buy others' fakes. Only buy from Gowe Industrial can enjoy after-care service.
-
3.5 of 5.0 with 31 Reviews
SALE PRICE: $1,035.00 1% OFF
Manufacturer: Dillon
Brand: Dillon
Manufacturer: Dillon
Brand: Dillon
Features accuracy of +/-0.5% of full range, choice of 5 or 10 dials, anti-parallax dial and pointer, zero control, maximum indicator, generous shackle openings, heavy-duty roller bearings and a wide operating temperature range. 500 to 100,000 pounds.
-
3.5 of 5.0 with 25 Reviews
SALE PRICE: $1,053.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Manufacturer: Mark-10
Brand: Mark-10
The TSA Manual Lever Operated Test Stand Vertical, 750lb Capacity, 6.00" Maximum Travel is a perfect solution for quick-action pull testing and compression testing of up to 750 lb of tensile or compressive force. Made of rugged, machined aluminum components, this test stand is durable enough for the factory floor, yet precise enough for laboratory environments. The test stand includes adjustable travel stops and a frictional low force brake. TSA Manual Lever Operated Test Stand is available in vertical and horizontal orientations.
-
3.5 of 5.0 with 11 Reviews
SALE PRICE: $1,075.00 1% OFF
Manufacturer: AWS
Brand: AWS
Manufacturer: AWS
Brand: AWS
The ITI-500 Torque Transducer with Intergrated Bench Stand, Range 50 - 500 Lb-in, Drive Size 3/8" is designed to work with the torque analyzers and data collectors, these high-strength aluminum integrated bench stands mount directly to a bench-top. Optional over-torque protection rings prevent accidental transducer overload on smaller transducers.
-
3.5 of 5.0 with 28 Reviews
SALE PRICE: $1,185.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series TT05
Manufacturer: Mark-10
Brand: Mark-10
Model: Series TT05
|
Series TT05 Cap Torque Tester, 100 lbFin / 1600 ozFin / 116 kgFcm / 1150 Ncm / 11.5 Nm Series TT05 universal torque testers can be used for a range of applications. The stainless steel loading surface features a matrix of threaded holes, ideal for accommodating specialized fixtures and attachments. The testers' rugged design and simple, intuitive operation allow for use in laboratory and production environments. Includes: Universal voltage AC adapter battery quick-start guide USB cable resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) NIST-traceable certificate of calibration Accuracy of 0.3% and blazingly fast sampling rate of 7,000 Hz ensure reliable and consistent test results, even in quick-action applications. Password protection is provided to prevent unauthorized changes to settings and calibration. The TT05 includes a range of sophisticated productivity-enhancing features, including USB, RS-232, Mitutoyo, and analog outputs, automatic data output and zeroing upon sample break, memory storage for 1,000 readings, pass/fail indicators and outputs, and more. First / second peak torque detection is useful for torque tool testing, tamper evident closure testing, and other applications. Series TT05 testers include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. Data stored in the TT05's memory can also be downloaded in bulk. One-click export to Excel allows for further data manipulation. Features: Stainless steel loading plate with #10-32 threaded holes accommodates fixtures and attachments Threaded holes are not drilled through the plate, for protection from debris and liquid USB, RS-232, Mitutoyo, and analog outputs Automatic output, data storage, and zeroing upon sample break helps automate testing processes First / second peak detection for torque tool testing, bottle cap testing, and other applications 1,000-point data memory with statistics and outputs Password protection p
-
3.5 of 5.0 with 18 Reviews
SALE PRICE: $1,237.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Manufacturer: Mark-10
Brand: Mark-10
The Mark-10 TORQ-T-50 Digital Torque Tester for Hand Tools, Capacity 50 lb-in, 220V is a simple yet accurate solution for testing torque screwdrivers, wrenches, and non-motorized torque tools. Applications exist in manufacturing facilities in virtually every industry. It features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The TORQ-T captures peak torque in both clockwise and counterclockwise directions.
|
|