Pressure & Vacuum Gauges - Page 104

Manufacturer: Parker Brand: Parker Model: R344-02A

19 scfm at 100 psi inlet pressure with 90 psig no flow secondary setting and 10 psig pressure drop.

Manufacturer: Winters Brand: Winters Model: PFQ811R1

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: PRM Brand: PRM

PRM 2.5 Inch Stainless Steel Pressure Gauge SS 1/4" NPT Bottom 0-150 PSI NEW IN BOX 2.5" SS PRESSURE GAUGE 0-150 PSI 1/4" NPT BOTTOM CONNECTION STAINLESS STEEL CASE, INTERNALS, & FITTING LIQUID FILLED

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-700 BAR-G

Metric BAR only single scale dial with 1/4" NPT male bottom pressure connection. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: Kodiak Controls Inc. Brand: Kodiak Controls Model: KC25-5#

Pressure Gauge 5 PSI, incorporates Capsule design for use on low pressure systems not limited to Gas measurement ad leakdetection

Manufacturer: GOSS Brand: Goss

Low pressure oxygen gauge for Goss EO25

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50702467

The WIKA Commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in an acrylonitrile butadiene styrene (ABS) plastic case for durability in high-impact environment. The gauge measures pressure up to 5,000 psi. It is accurate to a variety of percentages across the entire range of the gauge, depending on other features. Accuracy ranges are + or - 2.5 percent of span; or, + or - 3/2/3 percent of span over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) Grade B accuracy class. The male connection is available as either a lower mount, a center back mount, or a U-clamp mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for general applications in non-corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temp...

Manufacturer: GUARDAIR Brand: Guardair Model: 80LJ024AA

' Air Gun, Pistol Grip Body Style, Color Gray, Lever Trigger, Body Material Aluminum, 1/4 In. (F)NPT Inlet Size, 1/4 In. (F)NPT Outlet Size, 24 In. Extension Size, Nozzle Safety, Max. Inlet Pressure 120 psi, Output 1.5 lbf, Max. dBA 99, 29 scfm Air Consumption, 28 In., Standards OSHA '

Manufacturer: Turck USA Brand: Turck

Turck Extension Cable P/N: BSM BKM 19-995-0.6

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-321

Dwyer Instruments A-321 Brass safety relief valve