|
|
-
4.3 of 5.0 with 31 Reviews
SALE PRICE: $49.00
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
0-6" Range * 0.001" graduation * 2.5" base * Measuring Rods w. Flat Head * Satin Chrome Finish * FRICTION THIMBLE, RATCHED STOP, ROTATING SPINDLE.
-
4.3 of 5.0 with 14 Reviews
SALE PRICE: $49.00 1% OFF
Manufacturer: CME
Brand: CME Tools
Manufacturer: CME
Brand: CME Tools
8x12x2" granite check w. fine adjustment 8" column Accepts all A.G.D. indicators Flatness 0.00005" * QUESTIONS? E-MAIL: [email protected] Tel: 1-800-254-0007 Cel#:248-207-9813
-
4.3 of 5.0 with 7 Reviews
SALE PRICE: $49.77 1% OFF
Manufacturer: Tanis
Brand: Tanis
Manufacturer: Tanis
Brand: Tanis
3/4 x 36 Gauge Glass Brushes - 3 pack
-
4.3 of 5.0 with 25 Reviews
SALE PRICE: $49.95 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5000-25MM
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5000-25MM
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
4.3 of 5.0 with 13 Reviews
SALE PRICE: $49.96 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 40246582
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 40246582
|
The WIKA differential low pressure gauge has a circular dial that is 4" in diameter and is enclosed in a thermoplastic case with a polycarbonate window for increased durability in low temperature environments. The gauge measures pressure from 0.02 to 50 inch water column (inWC) and is accurate to + or - 3 percent of span over the entire range of the gauge. The female connection is a hosed barb that is made of plastic for increased durability. The gauge can be mounted and dismounted easily without the use of tools. The low pressure gauge is suitable for measuring differences of pressure in isolation chambers and for monitoring blowers and ventilators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards...
-
4.3 of 5.0 with 1 Reviews
SALE PRICE: $51.48 28% OFF
Manufacturer: Winters
Brand: Winters
Model: SSN518
Manufacturer: Winters
Brand: Winters
Model: SSN518
|
The Winters SSN series stainless steel 316 snubber has a sintered, porous stainless steel 316 snubbing element, a male x female connection, comes in three standard viscosity classifications, and operates in pressures up to 20,000 psi (413,700 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. The sintered, porous 316 stainless steel snubbing element has a large surface area to ensure long-term effectiveness. The snubber is available in the three standard viscosity classifications of heavy oil, water, and air. The male x female connection is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The burst pressure is 60,000 psi (413,700 kPa). The working pressure is a maximum of 20,000 psi (137,900 kPa). The operating temperature is -320 to 1,500 degrees F (-195 to 815 degrees C). This snubber suppress the effects of pressure pulses and pressure peaks to lessen the damaging effects of pulsation on gauges, transducers, transmitters, manometers, and pressure switches.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vesse...
-
4.3 of 5.0 with 44 Reviews
SALE PRICE: $52.00 1% OFF
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
Universal Right Angle Plate 4-1/2x5x8" smi-steel castings accurate groundMade of fine quality, fine grained semi-steel castings, stress relieved against distortion by proper heat treatment. All surfaces closely finished for square and parrallel references. Ground finish: 0.0005' per 6" 4-1/2"(L)x5"(W)x8"(H) Weight: 26 lbs
-
4.3 of 5.0 with 7 Reviews
SALE PRICE: $53.71 8% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5150-A
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5150-A
|
The NoShok 316 stainless steel sintered snubber has a male connection, comes with one of five standard grade discs, and operates in pressures up to 15,000 psi (103,420 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. It is available in A, B, C, D, or E grade discs to accommodate specific applications. The grade A disc is for use with gases and has an average air flow estimate of 0.25 L/min at 1 psi. The grade B disc is for use with gases and water and has an average air flow estimate of 0.63 L/min at 1 psi. The grade C disc is for use with water and light oil and has an average air flow estimate of 1.46 L/min at 1 psi. The grade D disc with light oil and has an average air flow estimate of 2.79 L/min at 1 psi. The grade E disc is for use with heavy oil and has an average air flow estimate of 3.14 L/min at 1 psi. The male connection is either 1/4" or 1/2" NPT (National Pipe Thread) rate. This snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to ...
-
4.3 of 5.0 with 47 Reviews
SALE PRICE: $56.00 26% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-300-RT
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-300-RT
Cf4.62 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.3 of 5.0 with 36 Reviews
SALE PRICE: $57.73 1% OFF
Manufacturer: Fotronic Corporation
Brand: Yellow Jacket
Model: 49518
Color: Blue
Manufacturer: Fotronic Corporation
Brand: Yellow Jacket
Model: 49518
Color: Blue
Gauges are completely filled with glycerin for maximum protection from pulsation. Large 3-1/2" (90 mm) diameter gauge with refrigerants color-coded on the dials in bold numbers. Offset stem fits all major manifold brands. Temperature rating of 0° to 122°F (-18° to 50°C).
|
|