Pressure & Vacuum Gauges - Page 150

Manufacturer: WEKSLER Brand: Weksler

NEW WEKSLER 413EN THERMOMETER 5FT TUBING 30-240F TEMPERATURE GAUGE D527281

Manufacturer: Winters Brand: Winters Model: PPS5068Z

Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. Restrictor screws standard on dual scale. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/2" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist. 0-400 psi/KPa.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-500-30/30-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-5-250-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 240-SC-02-O(JAA)

Mid-West Instrument diaphragm type differential pressure gauge. Over range protection to maximum pressure. Weather resistant gauge construction standard. Five year limited warranty. Low cost diaphragm type differential pressure gauge for use in measuring or controlling the pressure drop cross filters, strainers, separators, valves and pumps. CE Certified. UL Listed, IEC Certified. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Ceramic moving components. One control switch in NEMA 7 (explosion proof enclosure) (2). No input power for reed outputs A, E, F, G and H. SPDT, 3W, 0.25 Amp, 125 VAC/VDC (switch adjustable 15-100 percent of full scale ascending) 60 psid and above 25-100 percent of full scale ascending. Shatter resistant acrylic lens.

Manufacturer: Winters Brand: Winters Model: PFP662R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Winters Brand: Winters Model: PFP660R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Winters Brand: Winters Model: PFP661R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: AC DC Marine, Inc.TM Southern California Brand: AC DC Inc.TM Color: White

Pyrometer Exhaust Temperature Gauge A custom AC DC Inc.TM Gauge to measure temperature of the engine exhaust. Fahrenheit Degree Measurement Choose from Black or White display. Illuminated Pointed and Backlit LED Dial 12 VDC Internal Illumination Pointer color - Red fluorescent Stainless Steel Polished Bezel A standard 2" hole installation. THERMOCOUPLE NOT INCLUDED

Manufacturer: WIKA Brand: WIKA

NEW WIKA M933.D1 4232330-003 0-160PSI 1/2 IN NPT PRESSURE GAUGE D536144