Pressure & Vacuum Gauges - Page 22

Manufacturer: ControlAir Inc. Brand: ControlAir

Manufacturer: CME Tools Brand: CME Tools

Manufacturer: Sensocon Brand: Sensocon

S2005, Sensocon, Differential Pressure Gauge 0-5"

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9737090

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 5050

Piston type pressure snubber. It resists clogging and are self cleaning. Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application. Grade A and B pistons are applicable for Gases, grade B and C for Water, grade C and D for Light Oil, and grade E for Heavy Oil. Made of 316 stainless steel. 1/2" NPT male. 1.125" Hex. 0.625" Thread length. 1.875" Height.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-300-30-vac

High quality liquid filled gauges designed for durability, accuracy and long life. Pressure ranges from vacuum through 15000 psi. 2-1/2" Dial sizes bottom connected; single scale. Heavy one-piece die casting integrates the case, connection, movement. and bourdon tube support into a solid unit to eliminate leakage. Glycerine fill greatly reduces effects of vibration, pulsation and shock. Dials are printed with bold UV resistant ink for ease of readability even after years. of exposure to direct sunlight. Used in demanding applications that are not corrosive to brass, where vibration and pulsation are present. Die cast brass natural brass finish. Phosphor bronze "C" tube. Brass and Nickel-Silver with highly polished bearing surfaces. Safety relief disc on the top of the case. +/-1.5 percent Full scale ASME grade A Accuracy. Aluminum, white background with black markings. Glycerine and water fill liquid. Dynamic Pressure: The working pressure should be limited to 60 percent of the dial range for long service life. Static Pressure: The working pressure, where no sharp fluctuations occur, should be limited to 90 percent of the dial range. 0 to 160 degree F Ambient temperature. -4 to 140 degree F Media temperature.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50334620

The WIKA stainless steel adjustable throttling snubber has an adjustable needle valve to restrict flow under varying operating conditions, a temperature rating of 14 to 248 degrees F (-10 to 120 degrees C), a male x female connection with either 1/4" or 1/2" NPT rate, and operates under pressures up to 3,400 psi. The stainless steel wetted parts provide corrosion resistance. The adjustable stainless steel needle valve restricts flow under operating conditions with variable pressure. The snubber has a fluoro-elastomer O-ring for a tight seal. It operates under pressures up to 5800 psi, and is effective for applications with pressures above 5 psi. The snubber measures 2.4" (6 cm) high and 1" (2.5 cm) in diameter and has a temperature rating of 14 to 248 degrees F. Pressure gauge snubbers suppress the effects of pressure pulses and pressure peaks to increase the service life of pressure gauges in harsh applications, such as on reciprocating pumps and compressors, hydraulic presses, or fluid power systems, and improve the reading accuracy of the gauge.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to...

Manufacturer: Uniweld Products, Inc. Brand: Uniweld Model: USI4EZ

Uniweld USI4EZ Solution Injector has a capacity of 4 oz. and is used to inject solutions into an air conditioning and refrigeration system. It is constructed of rugged aluminum and has a maximum working pressure of 600 psi. It has a ¼” male flare fitting with a valve core at one end and a hand valve with a short length of hose and EZ-Turn Anti-Blowback fitting at the other end.

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-2333 Color: Stainless

Duro Pressure Gauge is 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5-Inches dial allows easy viewing and precise readings. High quality Stainless Steel case, 316 Stainless Steel 1/2-Inches male NPT connection and pressure system, for use with any liquid or gas that is compatible with 316 stainless steel. Quality made in USA.

Manufacturer: Winters Brand: Winters Model: PPS5047R1Z

Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/4" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist.