Pressure & Vacuum Gauges - Page 23

Manufacturer: BAOSHISHAN Brand: BAOSHISHAN

Boshi Electronic Instrument Features 1.Four LED HD display: more intuitive and clear 2.Remote data monitoring: information transmission 3.Three pressure units can be switched freely: Mpa Kgf Psi 4.Multi function protection settings: extended delay, reverse control, automatic pressure check protection 5.Scope of application: Medical Engineering, mechanical automation, energy equipment, pipeline engineering Technical Datas Model:YZ-B83 Range:0-2mpa Power:≤0.5w Current:20mA Display unit: Mpa Kg/cm2 PSI Supply voltage: 12VDC 24VDC 220VAC 380VAC (optional) Operating temperature: -20-80℃ Compensation temperature: -10~60℃ Sampling frequency: 5 times / sec digital setting 10HZ/ seconds Material: 304 stainless steel Shell material: engineering plastics Weight:0.5kg Note All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9833752

The WIKA process pressure gauge has stainless steel wetted parts, which are corrosion resistant against chloride, and a circular dial that is enclosed in a thermoplastic case for increased durability, particularly in low temperature environments. The gauge measures pressure from 15 pounds per square inch (psi) to 30,000 psi. Up to 20,000 psi, the gauge has an accuracy of + or - 0.5 percent of span, or American Society for Mechanical Engineering (ASME) B40.100 Grade 2A accuracy class. For pressure above 20,000 psi, the gauge has an accuracy of + or - 1.0 percent of span, or ASME B40.100 Grade 1A accuracy class. The male connection is available as either a lower mount or a lower back mount, and comes with a choice of a 1/4" or 1/2" National Pipe Thread (NPT) rate. This gauge is suitable for use in corrosive environments in process industries, such as chemical or petrochemical applications, mining applications, and power stations.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure ...

Manufacturer: Ashcroft Brand: Ashcroft

This gauge offers exceptional quality, durability, and performance. Designed with PowerFlexTM movement that provides superior resistance to shock, vibration, and pulsation. Also features True ZeroTM to reduce reading errors by using a zero box instead of conventional dial pins to help ensure product safety, integrity, and system control. Suitable for most applications and installation requirements. This listing is for each. Technical Specification Item Pressure Gauge Gauge Type General Purpose Dial Size 2-1/2 Range 0 to 100 psi Connection Size 1/4 NPT Connection Location Lower Smallest Graduation 2 psi Graduations 10 psi Accuracy +/-1.5% Case Material 304 Stainless Steel Case Color Silver Socket Material Brass Tube Material Bronze Filled With Glycerin Lens Material Polycarbonate Ring Material 304 Stainless Steel Operating Temp. Range -20 Degrees to 150 Degrees F Series 1009AWL Manufacturers Warranty Length 5 yr.

Manufacturer: ARTDID Brand: Industrial Scientific

Introduction Test Calibration Block for Hammer Hitting Brinell Hardness Tester Meter. 　 Features Standardized hardness block High homogenization and nice repeatability Portable test calibration block Item Included Test Calibration Block(220171)

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616-4

Series 616 Transmitter features an exceptional ±0.25% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 251009SW02BXLL3000#

Ashcroft is pleased to reintroduce the 1009SW Duralife pressure gauge. This gauge has been upgraded with many new features outlined above while maintaining the tried and true performance and quality you have come to expect. Duralife 1009SW gauges provide significant features and benefits. New features include a ventable plug that can be sealed or vented depending on your environment and a patent pending through-dial recalibration that reduces recalibration time. The combination of features including the patented PowerFlex movement and optional PLUS! Performance dampening system in the 1009SW is the finest gauge technology for vibration, shock and pulsation applications. Available in pressure ranges from vacuum to 15,000 psi, including compound and metric ranges

Manufacturer: Winters Brand: Winters Model: PFP643R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Winters Brand: Winters Model: PFP657

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Winters Brand: Winters Model: PFQ773

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF600-450-250-ST

6 in to 4.500 in Reducer Flange. Metal Con-flat Seal rated to 10-13 Tor. For UHV and HV applications. Made from 304 Stainless Steel. Large Bolt holes .332. Small bolt holes 5/16-24.