|
|
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $76.00 1% OFF
Manufacturer: Ashcroft
Brand: Ashcroft
Manufacturer: Ashcroft
Brand: Ashcroft
Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Item Differential Pressure Gauge Differential Pressure Range 0 to 30 H2O Rated Total Pressure 35 psi Connection Size 1/8 NPT Dial Size 4-1/2 Body Material Glass Filled Nylon Scale Type Pressure Pressure Range Minor Div. 0.60 H2O Accuracy +/-3% Dial Material Stainless steel Diaphragm Material Buna-N Piston Material Teflon Seal Material Buna-N Ambient Operating Range 0 Degrees to 140 Degrees F Includes Instructions Manufacturers Warranty Length 5 yr.
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $77.61 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451134EDRQMXCYLM20IW
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451134EDRQMXCYLM20IW
The Type 1134 uses a convoluted-diaphragm design with no migration of the process media. It is recommended for low differential inches of water ranges. Body material is glass filled nylon with Buna or silicone.
-
3.8 of 5.0 with 26 Reviews
SALE PRICE: $79.00 12% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50334638
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50334638
|
The WIKA stainless steel adjustable throttling snubber has an adjustable needle valve to restrict flow under varying operating conditions, a temperature rating of 14 to 248 degrees F (-10 to 120 degrees C), a male x female connection with either 1/4" or 1/2" NPT rate, and operates under pressures up to 3,400 psi. The stainless steel wetted parts provide corrosion resistance. The adjustable stainless steel needle valve restricts flow under operating conditions with variable pressure. The snubber has a fluoro-elastomer O-ring for a tight seal. It operates under pressures up to 5800 psi, and is effective for applications with pressures above 5 psi. The snubber measures 2.4" (6 cm) high and 1" (2.5 cm) in diameter and has a temperature rating of 14 to 248 degrees F. Pressure gauge snubbers suppress the effects of pressure pulses and pressure peaks to increase the service life of pressure gauges in harsh applications, such as on reciprocating pumps and compressors, hydraulic presses, or fluid power systems, and improve the reading accuracy of the gauge.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to...
-
3.8 of 5.0 with 7 Reviews
SALE PRICE: $79.95
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
17 pcs precision angle block set 1/4 to 45 degree 17 pcs angle blocks set accurate angles quickly. Just load on vise and rest the workpiece at any angle you choose. Made of high quality hardened steel. Precision ground. HARDNESS: HRC56 TO 60 1/4 degree to 45 degree. Accuracy: 0.0003" Including the following degrees of angle block: 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 35, 40, 45 and 2 other blocks. Any conveivable angles to these increments can be established. Lightly magnetized for better holding. Fitted in deluxe wooden box.
-
3.8 of 5.0 with 6 Reviews
SALE PRICE: $79.99 10% OFF
Manufacturer: Kibeland Limited
Brand: Kibeland
Model: PD_60
Color: Black
Manufacturer: Kibeland Limited
Brand: Kibeland
Model: PD_60
Color: Black
|
* This pressure manometer is widely applied in measuring the pressure of fans, resistance, wind velocity, oven pressure, differential pressure of filter, and monitoring the gas content in the air in process of combustion. * There are 11 selectable pressure units: bar, mbar, kPa, kgf/cm2, mmHg, cmH2O, Ozf/in2, psi, inHg, inH2O, ftH2O. This unit features data save and adjustment, automatic turn-off, connecting with PC to read and export the data with a USB wire. FEATURES: Large LCD Data Hold With Differential Mode and Record Mode USB Port Reset And Data Adjustment Low Battery Indication And Automatic Power Off SPECIFICATIONS: Accuracy: +/-0.3%FSO(25°C) Repeatability: +/-0.2% (Maximum+/-0.5%FSO) Linearity/Hysteresis: +/-0.29%FSO Response: Typical 0.5s Up Overload Indication: Err1 Down Overload Indication: Err2 Operating Temperature: 0~50°C Storage Temperature: -10~60°C USB Communication Low Battery indication Size: 7 x 3 x 1.2 inch Weight: 235g SET INCLUDES: Pressure Manometer x 1 USB Wire x 1 CD x 1 Translucent Silica Gel Hose x 2 Transparent PVC Hose x 2 1.5V AAA Battery x 4 Operation Manual x1 Standard Packaging Box x 1
-
3.8 of 5.0 with 7 Reviews
SALE PRICE: $80.04 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ765
Manufacturer: Winters
Brand: Winters
Model: PFQ765
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
3.8 of 5.0 with 32 Reviews
SALE PRICE: $80.82 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ1273
Manufacturer: Winters
Brand: Winters
Model: PFQ1273
|
The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $81.00 1% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ASA-5-250-N
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ASA-5-250-N
Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $81.10 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PCC600C
Manufacturer: Winters
Brand: Winters
Model: PCC600C
|
The Winters PPC series pressure gauge with brass wetted parts has a liquid-fillable circular dial enclosed in a PBT case and a lower mount male connection with 1/4" NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 1%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The chemical-resistant PBT (polybutylene terephthalate) case is color-coded for ease of process identification. The case comes in four different colors that are UV resistant and will not fade. The case is Ingress Protection certified IP65 for protection against solid objects including dust or liquids. The circular dial is 4" (100 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The dial has an aluminum anodized black pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The ring for the gauge is also PBT and the bourdon tube is phosphor bronze. The movement consists of OT59 brass gears and stainless steel 304 plates. The welding is a tin/copper alloy for pressures below 600psi (4,147kPa), and is a silver alloy for pressures 600psi (4.147kPa) and above. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for machinery, process lines, compressors, and hydraulics with heavy vibration and pulsation.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments,...
-
3.8 of 5.0 with 1 Reviews
SALE PRICE: $83.85
Manufacturer: Guardair
Brand: Guardair
Model: 74GSFA
Manufacturer: Guardair
Brand: Guardair
Model: 74GSFA
(1) Classic+ Super Fan Nozzle .83 dBA
|
|