|
|
-
3.8 of 5.0 with 50 Reviews
SALE PRICE: $96.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF600-275-150-ST
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF600-275-150-ST
6 in to 2.750 in Reducer Flange. Metal Con-flat Seal rated to 10-13 Tor. For UHV and HV applications. Made from 304 Stainless Steel. Large Bolt holes .332. Small bolt holes 1/4-28.
-
3.8 of 5.0 with 23 Reviews
SALE PRICE: $96.04 1% OFF
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: P31CA92GEMN5LNW
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: P31CA92GEMN5LNW
|
This Parker P31CA92GEMN5LNW filter, pressure regulator, and lubricator two-piece combination is part of the P31 Mini Series for pneumatic systems. The filter removes oil, water, and particulate as small as 5 micron; the regulator is a relieving type for venting excess pressure from the line; and the lubricator delivers oil over a wide range of air flows, with an adjustable delivery rate. The regulator and lubricator have polycarbonate bowls for resistance to oil, gas, and impact, with a guard for protection. The regulator has a manual drain. The unit comes with a gauge and mounting bracket. This element/regulator/lubricator unit has an operating pressure range of 0 to 125 pounds per square inch gauge (psig) and a high-flow 1/4" National Pipe Thread (NPT) port for a flow rate of 28 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
-
3.8 of 5.0 with 1 Reviews
SALE PRICE: $97.38 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50807111
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50807111
|
The WIKA differential low pressure gauge has a circular dial that is 4" in diameter and is enclosed in a thermoplastic case with a polycarbonate window for increased durability in low temperature environments. The gauge measures pressure from 0.02 to 50 inch water column (inWC) and is accurate to + or - 3 percent of span over the entire range of the gauge. The female connection is a hosed barb that is made of plastic for increased durability. The gauge can be mounted and dismounted easily without the use of tools. The low pressure gauge is suitable for measuring differences of pressure in isolation chambers and for monitoring blowers and ventilators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards...
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $100.00 1% OFF
Manufacturer: ASHCROFT
Brand: Ashcroft
Manufacturer: ASHCROFT
Brand: Ashcroft
NEW ASHCROFT 45-1279SS-4L CKG5AFA DURAGAUGE 0-200PSI 1/2 IN NPT GAUGE D530965
-
3.8 of 5.0 with 10 Reviews
SALE PRICE: $105.93 20% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9745408
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9745408
|
The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...
-
3.8 of 5.0 with 39 Reviews
SALE PRICE: $106.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2002-LCD
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2002-LCD
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.
-
3.8 of 5.0 with 4 Reviews
SALE PRICE: $111.59 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP668
Manufacturer: Winters
Brand: Winters
Model: PFP668
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
3.8 of 5.0 with 10 Reviews
SALE PRICE: $112.19 20% OFF
Manufacturer: Trerice
Brand: Trerice
Model: 700SS
Manufacturer: Trerice
Brand: Trerice
Model: 700SS
The Trerice 700 Series Industrial Gauge is designed for the varying needs of the world’s industrial applications. This gauge has a stainless steel case and ring. Its sturdy interior design and field liquid-fill capability (no kit required) provide the durability and accuracy required for industrial process environments. Available wetted parts are bronze tube with brass socket, stainless steel tube and socket, or Monel tube and socket.
-
3.8 of 5.0 with 45 Reviews
SALE PRICE: $113.13 13% OFF
Manufacturer: PERMA-CAL
Brand: PERMA-CAL
Manufacturer: PERMA-CAL
Brand: PERMA-CAL
NEW PERMA-CAL 121TID17Y23 0-10000PSI 1/2 IN NPT PRESSURE GAUGE D531725
-
3.8 of 5.0 with 5 Reviews
SALE PRICE: $116.82 12% OFF
Manufacturer: North Coast Electric
Brand: Fluke
Model: i2500-10
Manufacturer: North Coast Electric
Brand: Fluke
Model: i2500-10
The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 1.8m (6') cable. 40 dB External magnetic field rejection. Safety conformance: IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV.
|
|