Pressure & Vacuum Gauges - Page 293

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 105-FE-00-OO

Mid-West Instrument bellows type differential pressure gauge. Model 105 System pressure is applied to the internal volume of a bellows and mechanical linkage assembly. As pressure changes, the bellows and linkage assembly move to cause an electrical signal to be produced or to cause a gauge pointer to move. The major components are a two-piece body, multiple diaphragm/bellows sensing element and over-pressure assembly, a torque tube assembly, a range spring and the gauge front assembly. The body halves provide the pressure containment function. They also clamp the sensing element and over-pressure assembly between the halves, isolating the high side and low side pressures of the system. The high side body half also provides a mount for the torque tube assembly and the gauge front assembly. Model 105 assembly incorporates a bi-directional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT top and bottom connections, 6-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-1 percent full scale (ascending). Shatter resistant acrylic lens.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 122-AC-02-OO

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending).

Manufacturer: AMETEK Brand: Ametek

NEW AMETEK 1404 133252 SOLFRUNT 0-2000PSI 4-1/2 IN 1/4 IN NPT GAUGE D525524

Manufacturer: Indian Machine Tools Brand: AG Precision Model: NTD 400

These Nozzle testers are used to adjust the injector nozzle opening pressure, nozzle seat tightness and to carry out leakage tests, spray pattern atomization repetition tests and chatter characteristic tests. The nozzle tester consists of :- 1. Aluminum Cast Injection pump operated by a hand lever. 2. Semi Transparent fuel container with a 5 micron genuine Bosch filter. 3. Three way shut off valve. 4. Brass Bourdon tube Pressure gauge - 100 mm Dial, 3/8 " BSP thread Dual Scale Gauge:- Ranges: 0 - 400 Bar & 0 - 6000 PSI (See image 2 Above) 5. Packaged in export worthy thermocole and corrugated box. 6. Standard accessories:- - 1 handle with grip - 2 High pressure pipes 'A' and 'B' type with m.m. size nuts (12 X 1.5) and (14 X 1.5) for connections - 2 O-rings- 1 flat ring 7. Fitted with Original Bosch plunger and delivery valve. - We also provide the Operation Manual explaining the details and operation of the injector nozzle tester and the different tests it performs in the package. Excellent high quality testers that come with a warranty of 1 year. Note: These diesel injector nozzle testers are suitable for all kinds of diesel injectors except common rail (CRDI) diesel injectors. Important: Before shipping out, all our testers are thoroughly tested at our manufacturing facility for proper performance and functioning. They undergo pressure build up test, fuel leakage test, pressure gauge accuracy test etc. This is done to ensure that our quality standards are always met. They are tested with diesel fuel under the same conditions as they would be under normal use. We are the manufacturers and exporters of diesel fuel injection products for the last 35 years and have an expertise in this field, our products are highly reliable and dependable. We believe in offering excellent service to our customers.

Manufacturer: China Brand: Jinwen

product

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PFP-ZR Premium Industrial Gauges are ideally suited for chemical and petroleum process applications where chemical compatibility and contamination is a concern. PFP-ZR Add-On Options Features: StabiliZR"¢ dampened movement minimizes effects of pulsation and vibration without liquid filling Restrictor screw standard on dual scale (optional on single scale) Stainless steel case Under and overload stops Back, bottom or panel mounted 316 SS wetted parts ASME B40.100 compliant (EN837-1 available) RoHS compliant CRN registered 5 year warranty Made in Canada

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 701LDS-T-252B

700 Series Gauge Line Is A High Quality Line Of Plastic Case Liquid Filled Gauges. The glycerin filling which helps dampen the effects of pulsation and vibration, while perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which extends the life of the gauge