|
|
-
3.6 of 5.0 with 15 Reviews
SALE PRICE: $164.81 1% OFF
Manufacturer: Ashcroft
Brand: Ashcroft
Manufacturer: Ashcroft
Brand: Ashcroft
Technical Specification Item Pressure Gauge Gauge Type Oxygen Service Cleaned Dial Size 2-1/2 Range 0 to 3000 psi Connection Size 1/4 NPT Connection Location Lower Back Smallest Graduation 50 psi Graduations 500 psi Accuracy +/-1% Case Material Stainless Steel Case Color Silver Socket Material 316 Stainless Steel Tube Material 316 Stainless Steel Lens Material Polycarbonate Ring Material Stainless Steel Operating Temp. Range -40 Degrees to 150 Degrees F Characteristics PLUS Performance Series 1009 Manufacturers Warranty Length 5 yr. Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_
-
3.6 of 5.0 with 37 Reviews
SALE PRICE: $166.55 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451259SL02L100#/KP
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451259SL02L100#/KP
The Type 1259 process gauge is offered with an as-welded Bourdon tube to ensure safety and a longer life than competitive gauges. Meeting ASME B40.1, the Type 1259 process gauge has been engineered to meet marketplace requirements.
-
3.6 of 5.0 with 12 Reviews
SALE PRICE: $171.00 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9747724
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9747724
|
The WIKA capsule low pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is 4" in diameter and enclosed in a stainless steel case that resists corrosion against most samples. The gauge measure pressure up to 5 pounds per square inch (psi) or 200 inches of water (inH2O), and is accurate to + or - 1.5 percent of span over the entire range of the gauge. The male connection is mounted on the bottom of the gauge, and has a 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for use with non-corrosive fluid mediums, such as those found in low pressure pneumatic systems.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for quality a...
-
3.6 of 5.0 with 4 Reviews
SALE PRICE: $171.63 1% OFF
Manufacturer: Winters
Brand: Winters
Manufacturer: Winters
Brand: Winters
PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada
-
3.6 of 5.0 with 45 Reviews
SALE PRICE: $171.63 1% OFF
Manufacturer: Winters
Brand: Winters
Manufacturer: Winters
Brand: Winters
PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada
-
3.6 of 5.0 with 1 Reviews
SALE PRICE: $174.95
Manufacturer: TechnologyLK
Brand: TechnologyLK
Manufacturer: TechnologyLK
Brand: TechnologyLK
|
Push-Pull capability. Range is from 0-35 Pounds
Door Pressure Gauge Push-Pull instrument design specifically to measure force. This instrument is capable of measuring the entire range of forces found in servicing interior and exterior doors.
OPERATING INSTRUCTIONS
Set the top (small) o-ring located on the plunger rod on zero, down against the instrument's flange; or set the o-ring on the desired force. Holding the instrument firmly, press slowly against the door at a point approximately handle-high, and 30 inches away from the door's hinges. Read the amount of force required to open the door on the plunger scale closest to the bottom of the small o-ring.
MEET ADA REQUIREMENTS
The Americans with Disabilities Act requires that both interior and exterior doors of a building be handicapped accessible.
Door Opening Force (4.1311 ADA AG).
Exterior hinged doors:(Reserved)
Interior hinged doors:5 lbs (22.2N)
Sliding or folding doors:5 lbs (22.2N)
Automatic/Power Assisted Doors:(4.13.12) Such doors shall not open to back check faster than 3 seconds and shall require no more than 15 lbs (66.6N) to stop door movement. If a power assisted door is used, its door-opening force shall comply with 4.13.11 and its closing shall conform to the requirements in ANSI A156.19-1984.
Plastic Protective Tube for Door Pressure Gauge.
Size:8"
long 7/8" diameter
Includes:
Three Door Pressure Gauge Push-Pull, 0-35 Lbs
Three Plastic Protective Tube
-
3.6 of 5.0 with 6 Reviews
SALE PRICE: $175.05 7% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 40-510-30/15-psi
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 40-510-30/15-psi
|
The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...
-
3.6 of 5.0 with 15 Reviews
SALE PRICE: $176.39 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451379ASL04L200#
Color: Black
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451379ASL04L200#
Color: Black
Type 1379 Duragauge pressure gauge is offered in 4 1/2", 6" and 8 1/2" dials sizes. This rugged, solid-front aluminum case gauge is tops in its field. It is available as a weatherproof hermetically sealed or liquid-filled version in 4 1/2" and 6" sizes in pressures to 30,000 psi.Like the 1279, it can be easily field converted from the weatherproof version to either the sealed or liquid-filled version using an optional kit. Ranges 50,000, 80,000 and 100,000 psi are available in 6" hermetically sealed and liquid-filled cases. All cases are coated with black epoxy which will withstand most environmental conditions.
-
3.6 of 5.0 with 5 Reviews
SALE PRICE: $178.00 1% OFF
Manufacturer: Indian Machine Tools
Brand: AG Precision
Model: NTG 400
Manufacturer: Indian Machine Tools
Brand: AG Precision
Model: NTG 400
|
Made According to Standard Bosch Design with a heavy duty glycerin filled pressure gauge (0-400 Bar) which helps stabilize vibrations in the needle, provide more accuracy in results and increase the life of the gauge. The nozzle tester consists of : 1. Die cast Aluminum Injection pump operated by a hand lever 2. Transparent fuel container with a 5 micron genuine Bosch filter 3. Three way shut off valve 4. Glycerin filled, stainless steel heavy duty DUAL SCALE Pressure gauge ( Range 0-400 BAR / 0 - 6000 PSI, 150 mm Dial, half inch BSP thread) (Image 2) 5. Packaged in export worthy thermocole and corrugated box. 6. Standard accessories:- - 1 handle with grip - 2 High pressure pipes 'A' and 'B' type with m.m. size nuts (12 X 1.5) and (14 X 1.5) for connections - 2 O-rings - 1 flat ring 7. Fitted with Genuine Bosch Plunger / Element, Delivery Valve and Filter. - We also provide the Operation Manual explaining the details and operation of the injector nozzle tester and the different tests it performs in the package. Excellent high quality testers that come with a warranty of 1 year. Note: These diesel injector nozzle testers are suitable for all kinds of diesel injectors except common rail (CRDI) diesel injectors. Important: Before shipping out, all our testers are thoroughly tested at our manufacturing facility for proper performance and functioning. They undergo pressure build up test, fuel leakage test, pressure gauge accuracy test etc. This is done to ensure that our quality standards are always met. They are tested with diesel fuel under the same conditions as they would be under normal use. We are the manufacturers and exporters of diesel fuel injection products for the last 35 years and have an expertise in this field, our products are highly reliable and dependable. We believe in offering excellent service to our customers.
-
3.6 of 5.0 with 13 Reviews
SALE PRICE: $179.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ASA-11-000-N
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: ASA-11-000-N
Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.
|
|