Pressure & Vacuum Gauges - Page 322

Manufacturer: Test Products International, Inc Brand: TPI Model: 621

High efficiency gas and oil fired furnaces along with condensing boilers require a manometer with 0.001 inches of water resolution to make proper adjustments. 0.001 inH2O resolution at less than 40 inH2O; 0.01 inH2O resolution over 40 inH2O. Temperature compensated to ensure repeatable measurements. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg. Trim mode to stabilize readings. Auto power off after 20 minutes. +/- 0.2 percent accuracy. 300mbar over pressure. 32 to 104 degree F operating temperature. RoHS compliant.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 478A-0

The Dwyer Series 478A digital manometer provides positive, negative, and differential pressure measurements, and is used to perform single-pressure measurements and to set supply pressures, verify pressure switch operation, adjust regulators, check pneumatic systems, and computer peripherals. The meter is suitable for use with air and compatible gases, and has an accuracy of + or - 1.5% of full scale. The extruded aluminum case provides durability. The four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring, min/max display provides comparative data, and display hold retains last reading when the display cannot be seen during testing. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible gasesCase materialExtruded aluminumPressure unitsinH2O, mmH2O, bar, mbar, psi, inHg, mmHg, kPaConnection type3/16" or 1/4" inside diameter (ID) tubingMaximum pressure5 gauge psiDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving part...

Manufacturer: Kodiak Controls Inc. Brand: SSI Technologies Model: DFT-110

Ultrasonic digital drum level gauge can measures 15, 30, or 55 gallon drums at superb 2% accuracy. It comes with 2" and 3/4" bung attachments and is battery operated.

Manufacturer: Winters Brand: Winters Model: PETG201

Economical pressure gauge and valve body assembly used for pressure testing. Bleed port and plated housing on the gas test assembly. Black steel case. 5 year warranty. Single scale (psi). CRN registered. Applications: residential and commercial pressure testing of gas, air and water lines. Case: steel painted black. Lens: polycarbonate. Ring: steel, painted black. Bourdon tube: phosphor bronze. Movement: brass. Pointer: aluminum, black. Maximum pointer: available on water test gauge only. Welding: #50 tin solder. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-3-2-3 percent ANSI/ASME Grade B. Enclosure Rating IP52. 0-15 psi. 2" Dial display. Connection: 3/4" FNPT. Ambient/process temperature: -40/150 degree F. Gas Test: 40/150 degree F.

Manufacturer: Winters Brand: Winters Model: PETM213LF

Applications: Residential & commercial pressure testing of water lines. Economical pressure gauge and valve body assembly used for pressure testing. CRN registered. Warranty: 5 Years. Dial: White aluminum with black and red markings. Case: Steel, painted black. Ring: Steel, painted black. Lens: Polycarbonate. Bourdon Tube: Lead free phosphor bronze. Movement: Lead Free Brass. Working Pressure: Maximum 75% of full scale value. Enclosure Rating: IP52. Accuracy: ±3-2-3% ANSI/ASME Grade B. Water Test: 32F to 150F. Dial Size: 2.5” (63mm). Range: 0-160 PSI/KPA. Connection: 3/4" Female Swivel Hose Connection. Maximum Pointer Included.

Manufacturer: Fluke Corporation Brand: Fluke Model: L206

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need. 3 super bright white LED's. 360 degree rotating clip. Special hard-hat attachment included. 40-hour battery life. Water resistant. Durable polymer construction. Rubber shielded Bezel. Also includes a neck lanyard. Hats not included with Deluxe LED Hat Light L206.

Manufacturer: Kodiak Controls Inc. Brand: Kodiak Controls Model: KCDG158145

Low Cost Digital Pressure Gauge, 1/8" npt connection, brass wetted parts, back mount, 1.0% accuracy. Designed for air applications such as, but not limiting too, air regulators, compressors, air tank pressure measurement

Manufacturer: Winters Brand: Winters Model: PEM207

The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black-painted steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), and 4" (100 mm) diameters. The dial has an aluminum black pointer. The lens for the 1.5", 2", and 2.5"diameter dials is polycarbonate for high impact resistance. The lens for the 4" diameter dial is glass for strength and clarity. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT (National Pipe Thread) or 1/2" NPT rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a press...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50701576

The WIKA Commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in an acrylonitrile butadiene styrene (ABS) plastic case for durability in high-impact environment. The gauge measures pressure up to 5,000 psi. It is accurate to a variety of percentages across the entire range of the gauge, depending on other features. Accuracy ranges are + or - 2.5 percent of span; or, + or - 3/2/3 percent of span over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) Grade B accuracy class. The male connection is available as either a lower mount, a center back mount, or a U-clamp mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for general applications in non-corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temp...

Manufacturer: Trerice Brand: Trerice Model: D329

The D329 Pointer Jack is required for removing the pointer of a pressure gauge without causing damage to the dial face, pointer, pointer shaft or movement of the gauge.