|
|
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $72.27 1% OFF
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 202D-354F
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 202D-354F
An inexpensive utility gauge for the broad commercial and industrial markets. Suitable for air, water, oil, gas or any other media not corrosive to brass.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $77.08 6% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 1227
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 1227
Use Series 1227 as a regular U-tube manometer to read high-range pressure on the right leg, or as an inclined manometer to read low-range pressure on the bottom leg. Simply incline manometer until fluid levels read zero. No spirit level required. Magnetic clips hold the gage in position on a steel duct surface. Most versatile and useful low cost manometer we know of. Designed for installation and servicemen. A sturdy, clear plastic manometer, it offers single, direct readings in two ranges: As a U-tube, it reads from 0 to 16" of water; as an inclined gage, it reads from -.20 to 0 to 2.6" of water. Model 1227M (Metric) is 0 to 400 mm water column as a U-tube and -5 to 0 to 70 mm water column as an inclined gage. "How-to-use" instructions are printed directly on the scale.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $89.18 22% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FTPL-1
Color: Black/Red
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FTPL-1
Color: Black/Red
|
SureGrip fused test probe and test lead set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating. Fluke fuse part number 803293. 2mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads. TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone - insulated wire resists heat and cold. -20 to 50 degree C operating temperature. CAT III 1000 V, CAT IV 600 V, 10 A rating. One year warranty. Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. Current mode is non-functional with blown fuse.
-
1.5 of 5.0 with 2 Reviews
SALE PRICE: $248.00 1% OFF
Manufacturer: Iwiss Electric Co.,ltd
Brand: DSZH
Model: IWS-6884-L
Manufacturer: Iwiss Electric Co.,ltd
Brand: DSZH
Model: IWS-6884-L
The product includes: 2 Valve digital manifolds 3Pcs of charging hose Working pressure, 800PSI, Burst 4000PSI 5 Pcs of 1.5V Battery 2 Psc of temperature sensor 1 Psc of suitcase
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $29.75 13% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9677933
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9677933
|
The WIKA Commercial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is enclosed in an acrylonitrile butadiene styrene (ABS) plastic case for durability in high-impact environment. The gauge measures pressure up to 5,000 psi. It is accurate to a variety of percentages across the entire range of the gauge, depending on other features. Accuracy ranges are + or - 2.5 percent of span; or, + or - 3/2/3 percent of span over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) Grade B accuracy class. The male connection is available as either a lower mount, a center back mount, or a U-clamp mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for general applications in non-corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temp...
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $50.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: L207
Manufacturer: Fluke Corporation
Brand: Fluke
Model: L207
Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap. Cap adjusts for all-day comfort. Light attaches to bill of baseball cap. Rugged light withstands 6' drops to concrete. Waterproof light case won't crack or chip. Electrically and thermally nonconductive.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $70.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DPGA-04
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DPGA-04
The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $74.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2310
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2310
Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $84.00 1% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
Pressure Transducer, Pressure Range 0 to 100 PSI, Accuracy +/-1%, Output 4 to 20 mA DC, Power Required 13 to 30 VDC, Process Connection 1/4 In MNPT, Material of Construction Stainless Steel, Housing Stainless Steel, Operating Temp 0 to 200 F, NEMA Rating 4X, Connector Type Mini Hirschman, Loop Resistance 0 to 1300 Ohms, Max Pressure 200 PSI, Thermal Error +/-0.02%
-
1.0 of 5.0 with 1 Reviews
SALE PRICE: $85.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Mid-West Instrument five foot replacement hose assembly kit for 844 and 845 test kits. Hose color includes red, green and black. 1/4-inches straight quick coupler - both ends. Field serviceable filter housing and filters included.
|
|