|
|
-
4.8 of 5.0 with 19 Reviews
SALE PRICE: $212.70 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AA-00-O(CA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AA-00-O(CA)
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One switch in standard enclosure with 1/4-inches FNPT electrical connection NEMA 4X. SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 10-90 percent).
-
4.8 of 5.0 with 32 Reviews
SALE PRICE: $213.99 1% OFF
Manufacturer: FindingKing
Brand: Generic
Manufacturer: FindingKing
Brand: Generic
|
Uniweld Nitrogen Sludge Sucker/Blaster Kit RHP400, 516 Stand This is a new Uniweld Nitrogen Sludge Sucker/Blaster Kit RHP400, 516 Stand The preferred gas for the Sludge Sucker is Nitrogen because it's a dry gas that has multiple uses: purging an A/C&R system leak testing a refrigerant line calibrating pressure controls cleaning a condensate drain line cleaning coils inflating tires unclogging a sink operating impact tools and much more Uniweld does not recommend that CO2 be used for purging or pressure testing an A/C&R system because it may form carbonic acid within the system, causing premature equipment failure However, there are certain applications where CO2 has its advantages Because CO2 starts out as a liquid, it has a tremendous expansion rate; it is an ideal source of portable gas Pressure CO2 is ideal for clearing a condensate drain line, cleaning coils, inflating tires, unclogging a sink, operating impact tools and much more TANK NOT INCLUDED
-
4.8 of 5.0 with 16 Reviews
SALE PRICE: $220.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 41-600PA
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 41-600PA
|
The Dwyer Mark II 41-600 Pa inclined differential manometer with red gauge fluid has 20-0-600 Pa measuring range, built in zero level and molded plastic case for monitoring air velocity and air filter performance, and taking pressure measurements above and below atmospheric pressure. Blue gauge fluid eases reading for use in environments with ambient temperature above 32 degrees F. The built-in zero level provides linear calibration. The manometer has a styrene-acrylonitrile housing, indicating tube, and fluid wells for strength and durability. The molded ABS knobs and zero adjust plunger and shock-mounted glass level vial are wear-resistant. Leakproof O-ring seals and float-operated overflow traps reduce the risk of fluid loss. Scales are lithograph printed on aluminum to ease reading, and are epoxy coated to protect against wear. The manometer can be mounted on any vertical surface using the mounting holes or set on any horizontal surface using the included stand. SpecificationsPressure typesSingle and differentialMedia typeAirCase materialStyrene-acrylonitrileMeasuring range20-0-600 PaFluid typeBlue gauge fluid, 1.91 sp. gr.MountStand and vertical mountAccuracy+ or - 3% full scaleMaximum pressure15psi/100kPaScale lengthApproximately 8-1/4"/21cmMaximum temperature150 degrees F/65 degrees CWeight1.23 lbs./558gDimensions5-5/16 x 10-5/8 x 1-1/4 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the differen...
-
4.8 of 5.0 with 43 Reviews
SALE PRICE: $221.10 45% OFF
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 6001-4LA
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: 6001-4LA
A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.
-
4.8 of 5.0 with 19 Reviews
SALE PRICE: $223.00 1% OFF
Manufacturer: ASHCROFT
Brand: Ashcroft
Manufacturer: ASHCROFT
Brand: Ashcroft
NEW ASHCROFT C-600A-02-C12-B01-A1-L01-AK THERMOMETER 20-240F 1/2 IN NPT D531794
-
4.8 of 5.0 with 20 Reviews
SALE PRICE: $224.05 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP1089
Manufacturer: Winters
Brand: Winters
Model: PFP1089
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
4.8 of 5.0 with 25 Reviews
SALE PRICE: $225.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-AA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-AA-00-OO
|
Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.
-
4.8 of 5.0 with 29 Reviews
SALE PRICE: $225.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-AA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-AA-00-OO
|
Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.
-
4.8 of 5.0 with 30 Reviews
SALE PRICE: $225.39 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451279SS04LXLL60#/KSC
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 451279SS04LXLL60#/KSC
The Ashcroft Duragauge 1279 type pressure gauge is the finest production gauge on the market for industrial use where precise indications are required. The product line offers a wide variety of case styles, Bourdon tubes and pressure ranges to meet your application needs. With the component combinations available in the Duragauge gauge line, over ten million variations are possible to serve the needs of all types of industries, including process, power, nuclear, aerospace and cryogenics.
-
4.8 of 5.0 with 12 Reviews
SALE PRICE: $226.10 1% OFF
Manufacturer: Ashcroft
Brand: Ashcroft
Manufacturer: Ashcroft
Brand: Ashcroft
Technical Specification Item Compound Gauge Gauge Type Test Dial Size 4-1/2 Range 30 Hg Vac to 60 psi Connection Size 1/2 NPT Connection Location Lower Smallest Graduation 10 Hg, 10 psi Graduations 10 Hg to 10 psi Accuracy +/-0.5% Case Material Aluminum Case Color Black Socket Material 316 Stainless Steel Tube Material 316L Stainless Steel Filled With Glycerin Lens Material Acrylic Ring Material Threaded Polypropylene Operating Temp. Range 0 Degrees to 150 Degrees F For Use With Media Compatible with Bronze Series 1379SSL Compliance & Restrictions Compliance and Restrictions This listing is for each. _DELETE_
|
|