|
|
-
4.7 of 5.0 with 44 Reviews
SALE PRICE: $30.28
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-D
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-D
|
The NoShok 316 stainless steel sintered snubber has a male connection, comes with one of five standard grade discs, and operates in pressures up to 15,000 psi (103,420 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. It is available in A, B, C, D, or E grade discs to accommodate specific applications. The grade A disc is for use with gases and has an average air flow estimate of 0.25 L/min at 1 psi. The grade B disc is for use with gases and water and has an average air flow estimate of 0.63 L/min at 1 psi. The grade C disc is for use with water and light oil and has an average air flow estimate of 1.46 L/min at 1 psi. The grade D disc with light oil and has an average air flow estimate of 2.79 L/min at 1 psi. The grade E disc is for use with heavy oil and has an average air flow estimate of 3.14 L/min at 1 psi. The male connection is either 1/4" or 1/2" NPT (National Pipe Thread) rate. This snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to ...
-
4.7 of 5.0 with 8 Reviews
SALE PRICE: $31.00
Manufacturer: Trerice
Brand: Trerice
Model: 872-8
Manufacturer: Trerice
Brand: Trerice
Model: 872-8
872 Series Pressure Snubbers are designed to improve readability and prevent wear on delicate gauge mechanisms by slowing rapid pressure changes and reducing shock and chattering. A pressure snubber should be installed on a gauge in any application where pressure spikes and/or pulsations may be present. If a single snubber does not correct the oscillation, it is recommended to place an additional snubber in line with the first. Trerice Pressure Snubbers reduce the pulsation by forcing the pressure medium through a porous metal core and are constructed from brass or 303 stainless steel for use on a variety of pressure media.
-
4.7 of 5.0 with 47 Reviews
SALE PRICE: $33.29 59% OFF
Manufacturer: Winters
Brand: Winters Instruments
Model: PFP828R1
Manufacturer: Winters
Brand: Winters Instruments
Model: PFP828R1
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
4.7 of 5.0 with 14 Reviews
SALE PRICE: $33.75 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
The Series LPTK Gas Pressure Test Kit is ideal for testing LP and natural gas lines and controls. The kit's gage shows if proper pressure is present or if a leak exists. The Series LPTK Gas Pressure Test Kit is available in two different gage ranges and each gage is 3% full scale accurate with an easy to use calibration screw on the back of the gage. It is easier to use than a manometer, and includes a sturdy case for added durability and safe handling.
-
4.7 of 5.0 with 38 Reviews
SALE PRICE: $34.19 26% OFF
Manufacturer: Guardair
Brand: Guardair
Model: LZR650060AA
Manufacturer: Guardair
Brand: Guardair
Model: LZR650060AA
With a unique, ergonomic, pistol-grip design, the LZR650 Pistol Grip Series provides extended reach capability and fatigue-free operation. Integrated hanging eyelet for easy storage and retrieval. Powerful, accurate. Perfect for automotive and industrial cleaning applications.
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $34.66 31% OFF
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: TRI-RC-254R1.75-D
Manufacturer: PIC Gauges
Brand: PIC Gauges
Model: TRI-RC-254R1.75-D
These instruments have been designed to indicate temperature and pressure in a single unit. With a price that makes this an affordable option for applications where bronze internals are suitable for use, the use of a single 'Tridicator' saves time during installation, amount of piping required and of course saves money versus using separate gauges and thermometers. The primary applications for these are hot water boilers and water heaters.
-
4.7 of 5.0 with 25 Reviews
SALE PRICE: $36.38 2% OFF
Manufacturer: Branded
Brand: Unknown
Color: Multi
Manufacturer: Branded
Brand: Unknown
Color: Multi
Geared Steam Gauge For All American Pressure Cooker/Canners. Fits All American Models 910; 915; 921; 925; 930 & 941.
-
4.7 of 5.0 with 7 Reviews
SALE PRICE: $38.03
Manufacturer: Trerice
Brand: Trerice
Model: 885-1.1
Manufacturer: Trerice
Brand: Trerice
Model: 885-1.1
885 Series Coil Syphons are designed for use on steam service to form a pocket of water between the pressure gauge and the process steam, thereby preventing the steam from reaching the bourdon tube of the pressure gauge. Trerice Coil Syphons are constructed of steel, brass, or 304 stainless steel with a 180° coil for use on a variety of requirements. Other materials and coil styles are available; consult factory.
-
4.7 of 5.0 with 48 Reviews
SALE PRICE: $38.19 1% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 1150-C
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 1150-C
Sintered pressure snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes. This eliminates instrument failure due to pressure shock. Snubbing action is achieved by utilizing a corrosion resistant 316 stainless steel sintered disc. Provides long service life with no moving parts to wear out. Grade C disc is used in water and light oil applications. Made of brass. 1/2" NPT male. 1.125" Hex. 0.625" Thread length. 1.875" Height.
-
4.7 of 5.0 with 43 Reviews
SALE PRICE: $39.00
Manufacturer: Dickson Unigage Inc.
Brand: Dickson
Manufacturer: Dickson Unigage Inc.
Brand: Dickson
A pigtail steam siphon is used when monitoring the pressure of steam. Steam is often outside the range of the sensor and therefore a barrier must be created in order to protect the sensor. Filling the pigtail with water acts as a barrier between the sensor and steam.
|
|