Pressure & Vacuum Gauges - Page 74

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 140-SC-00-OO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.

Manufacturer: SSI Technologies Brand: SSI

Technical Specification Item Digital Pressure Gauge Dial Size (In.) 2-1/2 Range 0-3000 Connection Size 1/4-18 NPT W/22 MM Hex 316L Stainless Steel Connection Location Bottom Accuracy (%) +/-1.0% Socket Material 304L Stainless Steel Case Material ABS Thermoplastic Case Color Black Display 4 Digit LCD Display Units In PSI, BAR & MPA Resolution Dependent on Range Powered By 9 Volt Battery Agency Compliance ROHS Operating Temp. Range (F) -10 Degrees C To +60 Degrees C/+14 Degrees F To +140 Degrees F Features Multiple Pressure Units, Peak Hold, Zero Adjustment Series MG1 Includes Instructions Manufacturers Warranty Length 12 Month From Ship Date Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460346 Color: Yellow

Fluke IR Windows are the most rugged on the market, with a heavy duty aluminum housing and arc-flash resistance to increase safety when conducting thermal inspections. Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles. Certified by UL and CSA for Type 3/12 (outdoor) environments in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure. Certified by SIRA Certification IP65 (outdoor) environments in Europe. The CLIRVU coating-exclusive to Fluke IR Windows-seals the optic prior to assembly to protect against moisture degradation. The Quadraband optic is IR-Fusion compatible, allowing the thermographer to see potential problems in visual light and thermographic mode. Each C-Range window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs. Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template. Maximum temperature: 659 degrees C. Warranty: lifetime replacement against manufacturing defects.

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 111TIB08A23

Perma-Cal P/N 111TIB08A23 (Dial Trim: Dampening, Ext. Zero Adj. | Misc. Options: NONE) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16H22B13A2BCW

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL1550B

Replacement test lead set for the Fluke 1550B MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Length (lead only): 2.6m (8.6'). Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

Manufacturer: Winters Brand: Winters Model: P3S6162

The Winters P3S 300 series pressure gauge with stainless steel wetted parts has a circular dual scale dial that is enclosed in an aluminum case and a lower mount male connection with NPT rate, and measures pressure with a display accuracy of + or - 0.5%. The stainless steel wetted parts provide corrosion resistance. The circular dial is white aluminum, 4.5" (115 mm) or 6" (150 mm) in diameter, and enclosed in an aluminum case that is painted black and Ingress Protection certified IP52 for protection against dust and liquids. The front flange is polished stainless steel. The dial has an aluminum anodized black pointer that is micrometer-adjustable for ease of calibration, and the lens is glass for clarity. The gauge measures pressure with a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and has either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. The ring for the gauge is polished stainless steel. The bourdon tube is stainless steel 316L. The welding is stainless steel 316L tungsten inert gas (TIG) for strength. The over-pressure limit is 30% for pressures up to 600 psi (4,137 kPa), 25% for pressures from 600 to 1,400 psi (4,137 to 9,653 kPa), and 15% for pressures over 1,400 psi (9,653 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for boiler and control room applications with air, steam, oil, and fresh waterPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Mo...

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06A12A16A2BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07E38Z15AC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06A22A13A6BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.