|
|
-
4.6 of 5.0 with 443 Reviews
SALE PRICE: $23.71 24% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TL175
Color: Black/Red
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TL175
Color: Black/Red
|
Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.
-
4.6 of 5.0 with 21 Reviews
SALE PRICE: $24.58 1% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 1125-C
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 1125-C
Sintered pressure snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes. This eliminates instrument failure due to pressure shock. Snubbing action is achieved by utilizing a corrosion resistant 316 stainless steel sintered disc. Provides long service life with no moving parts to wear out. Grade C disc is used in water and light oil applications. Made of brass. 1/4" NPT male. 0.812" Hex. 0.56" Thread length. 1.60" Height.
-
4.6 of 5.0 with 38 Reviews
SALE PRICE: $26.28 2% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-338
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-338
The Dwyer A-338 brass servel adapter connects rubber or plastic tubing to gas appliances. Brass construction is durable for use with gas. The adapter has 3/8" and 5/16" National Fine (NF) threads for gas appliances and barbs for 1/8" and 3/16" inner diameter plastic or rubber tubing. Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.
-
4.6 of 5.0 with 42 Reviews
SALE PRICE: $29.95 1% OFF
Manufacturer: Globe Warehouse
Brand: Globe House Product
Manufacturer: Globe Warehouse
Brand: Globe House Product
Features:
Checks cylinder compression from 0 PSI to 300 PSI. (0 to 21kg/cm2)
Fits 14mm and 18mm spark plug threads
Equipped with air-hold valve and gauge reset button
13-inch flexible hose
Complete instructions included
2-1/2" Gauge
-
4.6 of 5.0 with 4 Reviews
SALE PRICE: $29.99 1% OFF
Manufacturer: Makeblock
Brand: Makeblock
Manufacturer: Makeblock
Brand: Makeblock
Handy bottle cap with 0.5Mpa pressure gauge and 0.3Mpa auto relief valve, proving safe and secured experience. Size Chart: Height/Width/Length: 80 x 15 x 35 mm (3.15 x 0.59 x 1.38 inch) Part List: 1 x Bottle Cap with Relief Valve and Pressure Gauge
-
4.6 of 5.0 with 28 Reviews
SALE PRICE: $30.00 1% OFF
Manufacturer: ProSciTech
Brand: ProSciTech
Manufacturer: ProSciTech
Brand: ProSciTech
ProSciTech VBP-40 40Kf Blank Plate
-
4.6 of 5.0 with 46 Reviews
SALE PRICE: $30.22 17% OFF
Manufacturer: Winters
Brand: Winters
Model: PCT324LF
Manufacturer: Winters
Brand: Winters
Model: PCT324LF
Applications: Most commercial air, water and steam services that require a +/-1 percent full-scale accuracy. Economical 4.5" stainless steel case gauge. Dial: White aluminum dial with black and red markings. Case: stainless steel 304. Lens: acrylic. Ring: stainless steel 304. Socket: Lead Free Brass. Connection: 1/4" NPT Bottom Connect. Bourdon tube: Lead Free phosphor bronze. Movement: brass. Pointer: aluminum, anodized black, recalibrator screw. Welding: silver solder. Over-pressure limit: 25%. Working pressure: maximum 75 percent of full scale value. Ambient/Process temperature: -40F to 200F (-40C to 93C). Accuracy: +/-1% ANSI/ASME grade 1A. Enclosure rating: IP52. CRN registered. Warranty: 5 years. Dial Size: 4.5" (115mm). Range: 0 - 160 psi/kPa.
-
4.6 of 5.0 with 46 Reviews
SALE PRICE: $30.40 1% OFF
Manufacturer: SMC
Brand: SMC Corporation
Model: AR40-N04-Z
Manufacturer: SMC
Brand: SMC Corporation
Model: AR40-N04-Z
Cost effective and clean looking, series AR regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment. Relief pressure: Set pressure + 0.05 MPa.
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $30.60 26% OFF
Manufacturer: Guardair
Brand: Guardair
Model: 74BH018Z
Manufacturer: Guardair
Brand: Guardair
Model: 74BH018Z
Specifically designed to clean out blind holes in metal, wood, and plastic work pieces. Delivers a high velocity jet of air into deep crevices and blind holes to flush out chips and dirt. Proprietary, protective air cone shields against dangerous "chip fly-back." Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort.
-
4.6 of 5.0 with 28 Reviews
SALE PRICE: $30.77 1% OFF
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-C
Manufacturer: NOSHOK, Inc.
Brand: NOSHOK
Model: 5125-C
|
The NoShok 316 stainless steel sintered snubber has a male connection, comes with one of five standard grade discs, and operates in pressures up to 15,000 psi (103,420 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. It is available in A, B, C, D, or E grade discs to accommodate specific applications. The grade A disc is for use with gases and has an average air flow estimate of 0.25 L/min at 1 psi. The grade B disc is for use with gases and water and has an average air flow estimate of 0.63 L/min at 1 psi. The grade C disc is for use with water and light oil and has an average air flow estimate of 1.46 L/min at 1 psi. The grade D disc with light oil and has an average air flow estimate of 2.79 L/min at 1 psi. The grade E disc is for use with heavy oil and has an average air flow estimate of 3.14 L/min at 1 psi. The male connection is either 1/4" or 1/2" NPT (National Pipe Thread) rate. This snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to ...
|
|