Conductivity Meters & Accessories - Page 32

Manufacturer: Generic Brand: Generic

Range: 0~9999 μs/cm Accuracy: ±2% Calibration: Factory calibrated Auto shut-off: 10 minutes Work temperature: 0~60 degree Celsius Battery: 2 * 1.5V button cell (Not included)

Manufacturer: Ricca Chemical Brand: Ricca Chemical

Ricca Chemical Company 5887.5-32 Potassium Chloride Conductivity Standard, 500 microsiemens per centimeter (500 micromhos per centimeter), 1 L is manufactured with the tighest specifications currently available on the market and is intended for calibration of conductivity meters. The specification on Potassium Chloride Conductivity Standard, 10 microsiemens per centimeter (10 micromhos per centimeter) is plus-or-minus 0.03 at 25 degrees Celsius. This standard is certified traceable to NIST Standard Reference Material, lot numbered and expiration dated.

Manufacturer: Oakton Brand: Oakton Model: WD-35462-15

New economical conductivity and TDS pocket meters feature a large, ergonomically designed display so that you can easily view measurements at a glance. The orientation of the display means there’s no need to turn your head or tilt the tester. Waterproof and dustproof housing is designed for use in dirty and damp field conditions. Convenient, built-in belt/pocket clip keeps the tester accessible when not in use. Stainless steel electrodes are both rugged and chemical resistant, for use in a wide variety of applications. Single-point electronic calibration means you are ready to measure quickly and easily. Additional features include auto-shutoff to prolong battery life, hold function to lock in a measured value, and self-diagnostic error messages. Testers also have a self-adjusting TDS factor from 0.40 to 1.0.

Manufacturer: Hydrofarm, Inc. Brand: Milwaukee Model: MIT76

Professional, easy-to-use Waterproof TDS tester. Get accurate testing every time with this Milwaukee TDS T76 tester. Includes three 1.5 volt button batteries250 hours battery life.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI983302N-02

This meter has been engineered with a host of features suited for the aggressive environments commonly found in agricultural applications. Housings and cable connections have been sealed against vapor and humidity. This EC meter comes with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean, is very stable and needs little maintenance. The 12 VDC power supply included with the meter eliminates low battery failures. It is supplied with Conductivity and TDS probe, 12 VDC adapter, 1413 mS/cm calibration solution (20 mL), calibration screwdriver. 0.00 to 9.99 mS/cm range. 0.01 mS/cm resolution. +/-2 percent FS accuracy. Manual at 1 point, through trimmer calibration. Automatic, 5 to 50 degree C with beta is equals to2 percent/degree C temperature compensation. Conductivity and TDS probe (included). 12 Vdc power adapter included probe power supply. 0 to 50 degree C, RH maximum 100 percent environment. Weight: 7.6oz.

Manufacturer: Ohaus Brand: Ohaus Model: 30073977

Ohaus pen meters provide accurate measurement of pH, oxidation-reduction potential (ORP), conductivity, salinity and total dissolved solids (TDS). Starter pen meters are the economical option when you are simply looking for meters that will provide accurate measurement with no restriction. Each meter offers simple operation in a slim & portable design providing fast, straight-forward results time and time again. Durably constructed to withstand wear and tear, Ohaus pen meters provide a sturdy plastic, waterproof housing, protective safety cap, integrated wrist strap and auto shutdown feature to preserve battery life.

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments HI 86302N is a waterproof meter for measuring electro-conductivity (EC) and Total Dissolved Solids (TDS). The meter features a large LCD screen for readability, and automatic temperature compensation to eliminate the need for additional calculations. Calibration is manual at one point. TDS range is 0.0 to 10.00 ppt + or – 2% F.S, with resolution 0.011 ppt. The meter operates on one 9V battery, and features a battery error prevention system to prevent erroneous readings. Dimensions are 164 x 76 x 45 mm (6.4 x 3.0 x 1.8’’) with weight 250 g (8.8 oz.). Conductivity meters are used for measuring the electro-conductivity of a solution. They are commonly used in hydroponics, aquaculture, and research to measure the amount of salts or other compounds present in water. Hanna Instruments manufactures a wide variety of analytical instrumentation, including pH meters, multi-parameter meters, electrodes, chemical reagents, and buffer solutions. Founded in 1978, Hanna is headquartered in Woonsocket, RI, with subsidiaries in 32 countries. Hanna Instruments holds many firsts in the field of analytical instrumentation, including a pH electrode with a built-in temperature sensor, an electronic pocket-sized pH tester, and a replaceable electrode pH pocket tester. To ensure the quality of its products, Hanna is a vertically integrated manufacturer and does not subcontract any part of its manufacturing. What’s in the Box? HI 7632D/1 conductivity probe HI 70032 (1382 ppm) calibration solution sachet (20 mL) Screwdriver Battery Instructions

Manufacturer: wonderfullife.diy Brand: wonderfullife.diy

Specification:Measuring range:0~5.0% Accuracy:±0.2 Resolution:0.1% Automatic temperature compensation:0℃~50℃ Operating Temperature:0℃~50℃Correction :1:00 automatic correction Automatic shutdown :5 minute auto shut off Low voltage indication:Have Automatic conversion of ℃ / ℉ Have Hold Function : Have Low voltage indication :Have Display: mL / g and temperature dual display Battery:6V (4 * AG13 button batteries) CBM :188mm×38mm Weight:82g Package Included:1 x Digital salt meter

Manufacturer: Sunleaves Brand: Sunleaves

Very affordable, Great meter at a great price, A must have for your garden

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35606-53

The Oakton WD-35606-53 Ultem Conductivity/TDS Cell is an electrode, or probe, that measures the electrical conductivity (EC) and Total Dissolved Solids (TDS) of a solution. Probes are commonly used for chemical analysis and to test solutions. This probe features a built-in sensor for automatic temperature compensation (ATC). It has ultem-PEI body housing and stainless steel rings for chemical resistance. The probe has a BNC connector, with snap-lock architecture, to provide tight coaxial cable connection and stability. The electrode provides fast temperature response and air entrapment reduction, for more accurate, stable readings. It has a cell constant (K) =0.1, which is suitable for low-conductivity measurements. This probe features a three-foot cable, three-band platinum sensor and has probe style C; it is general purpose, has amber glass, resists Na+ interferences, is single reference junction, and is sealed. It is to be used at a temperature range of 158 degrees F (70 degrees C). Its dimensions are 12(d) x 110(l) mm. The electrode has a removable, plastic probe guard and is intended for use with the Oakton CON 6, TDS 6, and SALT 6 (sold separately). Conductivity is the ability of a solution or material to conduct an electrical current. TDS measurement indicates materials such as salts, bases or minerals, which contribute to electrical conductivity, within a solution. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? One conductivity/TDS electrode One three-foot cable Removable, plastic probe guard