Conductivity Meters & Accessories - Page 39

Manufacturer: NEWGATE Brand: i-mesh-bean Model: 109-4001 Color: 6 in 1 Water Tester

iMeshbean® is a registered trademark and "Newgate-Ship from CA"is the only authorized seller of iMeshbean branded products. Features 1. Brand New in Box Ready to Be Operated Upon Arrival. 2. Six-in-one Meter: EC, CF, ℃, °F, TDS, pH 3. Easy Calibration of pH and TDS with just a Mini-screwdriver 4. Automatic Temperature Compensation (without this, pH reading will differ as the temperature varies) 5. Large, Triple Level Display 6. Caps on Both Sides for Storage and Protection of Electrodes 7. Suction Cups to Attach the Electrodes onto the Inwall of the Vessel, Tank or Reservoir etc. 8. Silicone Skin Case Could Protect the Meter from scratches 9. CE Certificated to Offer Safer and Precise Measurement Specification: Operating Temp: 0℃ ~ 50℃ (32°F ~ 122°F) Automatic Temp. Compensation: 0℃ ~ 50℃ (32°F ~ 122°F) Dimension: 6" x 3 3/8" x 7/8" (155 x 86 x 22mm) Weight: approx. 223g Package: 1 x Six-in-one Meter 2 x Probes 1 x AC-DC Adaptor 2 x Suction Cups 1 x Mini Screwdriver 1 x Silicone Skin Case

Manufacturer: COLE-PARMER Brand: Extech

What's included: EC400 pocket tester, conductivity sensor, sensor cap, sample cup, four CR2032 batteries, and 48" neckstrap. Waterproof meter for use in waste, boiler; cooling water; pure and drinking water Autoranging with 8 selectable units: µS, mS, ppm, ppt, mg/L, g/L, °C, and °F Analog bargraph indicates trends Data Hold, Auto Power Off, Low battery indicator Simultaneous display of conductivity or TDS plus Temperature Internal memory stores up to 15 labeled readings for easy recall Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 Self calibration on power up Waterproof to IP67

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35607-69

The 35607-69 is a calibration kit that contains supplies to help in calibration of the CON 11, CON 400 and CON 410 meters. A calibration kit has supplies to help calibrate a meter for field and lab use in research, ecological, drinking water and environmental monitoring applications. This calibration kit features four each of Total Dissolved Solids (TDS) calibration pouches (447 μS, 1413 μS, 2764 μS, 15.0 mS) that are pre-measured for ease of use, four freshness-dated, sealed rinse water pouches for accurate measurement, and four sample bottles for ease of application. The kit comes in a hard, plastic carrying case that includes extra room for the probe and meter. The 35607-69 kit is used with the Oakton CON 11, CON 400 and 410 meters (sold separately). Its dimensions are 11.5 (l) x 3.0 (h) x14 (w) inches. A calibration kit has supplies that assist in the calibration of meters during lab and field use in aquaculture, water testing, hydroponics and environmental monitoring. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety of instruments such as meters, electrodes, and transmitters. Oakton is based in Vernon Hills, IL, and has facilities in Europe, Asia, and China. What’s in the Box? Solution pouches Rinse water pouches Sample bottles Carrying case

Manufacturer: Baoshishan Brand: Baoshishan

Boshi Electronic Instrument Technical Datas Measuring range:0 ~ 2 x 105 (mu S/cm) Accuracy:+ 1% F*S Instrument stability:0.5% Temperature compensation range:15 ~ 35 (c) Output measurement signal:0 ~ 20 (mV) Instrument dimensions:240 x 170 x 60 (mm) Instrument weight: 0.7 (Kg) Power consumption: 3 (W) Adjustable electrode specifications: 0.01, 0.1, 1 Description DDS-11A digital conductivity meter is a kind of precise instrument which can be used to measure the conductivity of various kinds of liquid medium in the laboratory.It is widely used in many fields such as scientific research, teaching, industry, agriculture and so on. When the conductance electrode with 0.1 and 10 constant is used, the high pure water conductivity or high conductivity water can be measured accurately. Note All products have been checked and packaged in good condition before shipping. After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35425-10

The Oakton 35425-10 Oakton Multiparameter 35-Series PTTestr 35 is a handheld, waterproof, and dustproof pocket meter that measures pH, conductivity, and temperature and floats, if dropped in liquids. A portable pocket meter is commonly used to measure the pH of substance in hydroponics, agriculture, industrial process checks, water treatment, and swimming pools. This meter features ATC for accurate readings in fluctuating temperatures, and push-button calibration capabilities for a wide range of results. It has stainless steel, pin-type conductivity sensors for durability and compatibility with a wide variety of samples. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. The testr has a long-lasting sensor with Polyvinylidene Fluoride (PVDF)-protected reference junction with polymer gel for longer lifespan. The meter has a large, upright, dual-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools. The 35425-10 pocket meter has ATC from 0 to 50 degrees C (32 to 122 degrees F), or manual ability, and an operating temperature range of 0 to 50 degrees C (32 to 122 degrees F), resolution 0.1 degree, + or - 0.5 degrees C (+ or - 0.9 degrees F). It has 1-point temperature, 1-point salinity, 3-point TDS, 3-point conductivity, and 5-point pH calibration capability range. pH range is 0.0 to 14.0, resolution 0.1, accuracy + or - 0.1. TDS range 0 to 99.0 ppm; 100 to 999 ppm, 1.00 to 10.00 ppt, resolution 0.1 ppm, 1 ppm, 0.01 ppt, accuracy + or - 1% full-scale. Conductivity range 0 to 200 μS; 201 to 2000 μS, 2.01 to 20.00 mS, resolution 0.1 μS, 1.0 μS, 0.01 mS, accuracy + or - 1% full-scale. Salinity range 0 to 10.00 ppt, 0.1 ppm, 1 ppm, resolution 0.01 ppt, 0.01%, accuracy 1% full-scale. Its dimensions are 1.25 (w) x 6.5 (h) inches (3.8 x 16.8 cm) and it weighs 3.25 o...

Manufacturer: Umishion Brand: Umishion

Umishion® quality combination TDS meter and temperature teter Features: * The Umishion TDS Meter with advanced CPU that automatically calibrated per temperature. It with 0-9990 ppm measurement rang, ± 0.02 Readout Accuracy. * Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. * Large Backlit LCD Screen. * Date lock function,makes it easy to read and record, press HOLD button then remove from test solution. * Use for for Household drinking water, Aquarium pool water, Swimming pools, Hydroponics, SPA, Laboratory and Scientific testing. Specification Range: 0～9990ppm(mg/L) Temperature range: 0-99℃ or 32-212℉ Accuracy: ±0.02 Temperature compensation: 0-60°C Operating voltage: 2 x 1.5V Battery life: approx. 1000 hrs Operating temp: 0℃～60℃ Calibration: factory calibrated Auto-off time: 10 min Weight: 1.13oz Dimensions: 6.1x 1.2x 0.9in Package includes 1 X TDS meter 1 X protective bag 1 X User manual

Manufacturer: FicBox Brand: FicBox Color: Blue

Product Description: How Pure is Your Water? A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS-4 can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS-4 is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS-4 is a great tool for drinking water, water filtration and purification, hydroponics (test your nutrients), colloidal silver, aquariums, RO/DI systems, pools and spas, and more.

Manufacturer: Xcdiscount Brand: Xcdiscount

A TDS meter (aka ppm pen, nutrient tester, tads stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS-3 can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS-3 is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS-3 is a great tool for drinking water, water filtration and purification, colloidal silver, hydroponics (test your nutrients), aquariums, RO/DI systems, pools and spas, commercial and industrial applications and more. The TDS-3 is a rugged model that includes a protective carrying case. This is the world's most popular handheld TDS meter for both industry professionals and house hold use.

Manufacturer: Infinity Brand: InfinityTDS Color: White

Handheld Meter to test the quality of your water. *Large and Easy To Read LCD screen Includes temperature reading. Fast reading result. *Shifting between TDS, Conductivity Meter and Temperature. *Default is TDS, to switch to conductivity please press SHIFT button. *To Change from Celsius to Fahrenheit please press SHIFT button twice to change. * 5 minute Auto-Shut off to save battery life. * Battery Included

Manufacturer: NEWGATE Brand: i-mesh-bean Model: 109-4003 Color: TDS Tester