|
|
-
3.6 of 5.0 with 5 Reviews
SALE PRICE: $21.60 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: 1196L06EA
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: 1196L06EA
|
Water contains a variety of minerals and salts such as carbonates, bicarbonates, chlorides and nitrate. TDS is the parameter that measures the total sum of all of these compounds. TDS 1 is a simple and affordable tester for TDS measurements. Due to its internal sensor, TDS measurements are automatically compensated for temperature variations. Calibration can be performed in one point with a trimmer. The tester is supplied with a cap that protects the probe when it is not in use. Batteries can be easily replaced. Light and small, TDS 1 is an ideal pocket meter to perform quick TDS measurements. TDS 1 is supplied with protective cap, calibration screwdriver, batteries. Range: 0 to 999 parts per million ( milligrams per liter). Resolution: 1 parts per million ( milligrams per liter). Accuracy: +/-2 percent F.S. Calibration solution: HI 70080P. Calibration: manual, 1 point, through trimmer. Temperature compensation: automatic, 5 to 50 degree C (41 to 122 degree F). Battery type/life: 4 by 1.5V/approx 150 hours. Environment: 0 to 50 degree C (32 to 122 degree F); RH max 95 percent. Measures 5-57/64" length by 1-3/16" width by 0-51/64" height. Weight: 70 g (2.5 oz).
-
3.6 of 5.0 with 2 Reviews
SALE PRICE: $27.25 1% OFF
Manufacturer: Carolina Biological Supply Company
Brand: Carolina Biological Supply Company
Manufacturer: Carolina Biological Supply Company
Brand: Carolina Biological Supply Company
|
Test conductivity in the classroom or field with this portable battery-powered meter. For a quick visual comparison of conductivity, press and hold the side button, and then touch both brass prongs to a solid or submerge them at least 1_ into a liquid. Easily read conductivity, from 1 (low) to 10 (high), on the green LEDs. Release the button, clean the probes with water, and you are ready to test again. Includes battery and operating instructions. A small Phillips screwdriver is needed but not supplied. Works in common test solutions such as tap water, vinegar, baking soda solution, or varying concentrations of salt water. To prevent corrosion, clean the prongs with water before storage. Body measures 2-1/2_ L x 1-1/2_ H x 7/10_ W (65 mm L x 38.1 mm H x 17 mm W).Total unit length (including prongs) is 5-1/2_ (140 mm). Helps you teach the following Next Generation Science Standards Student Performance Expectations:Matter and Its Interactions (5-PS1) Make observations and measurements to identify materials based on their properties. (5-PS1-3)
-
3.6 of 5.0 with 39 Reviews
SALE PRICE: $48.95 1% OFF
Manufacturer: HM Digital
Brand: HM Digital
Manufacturer: HM Digital
Brand: HM Digital
|
Brand New - HM Digital DM-1B (with two 1/2'' Tees) Inline Dual TDS Monitor Measure the tap water coming in vs. the purified water going out of your system at any time. Use the monitor to determine when the filters need to be changed. Install the meter for your customers so they'll always know how their system is performing. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5" (including sensor) Fittings: Two 1/2" Tee Power source: 2 x 1.5V button cell batteries (included) Battery life: approx. 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.)
-
3.6 of 5.0 with 24 Reviews
SALE PRICE: $49.99 1% OFF
Manufacturer: BIPEE
Brand: BIPEE
Model: 3030
Manufacturer: BIPEE
Brand: BIPEE
Model: 3030
Description:This Pen style Waterproof Conductivity (EC) Meters is Waterproof and available for wide applications, such as aquarium, beverage, fish hatcheries, food processing, photography, laboratory, quality control, school & colleges, swimming pools, water conditions. Specification:Measuring Range: 0~1999us/cm Accuracy:+/-2%FS One point Calibration:1413us/cm Working temperature range:0~50 Celsius Degree 1.5V *4 Button cell battery; Dimension 188*38mm with Internal Electrode; Weight 82g
-
3.6 of 5.0 with 38 Reviews
SALE PRICE: $51.78 48% OFF
Manufacturer: Labwell
Brand: Labwell
Manufacturer: Labwell
Brand: Labwell
Specification: Measures electrical conductivity (EC) Measures total dissolved solids (TDS) Measures temperature. Waterproof housing. Switchable temperature scales (°C / °F) Large LCD with backlight IP65 waterproof (Resistant to splash water only) Automatic Temperature Compensation (ATC) : 0 - 50 °C (32 - 122 °F) Automatic Shutdown in 5 minutes for power saving Batteries: 4 x 1.5 V (AG-13) button cell battery (included) Dimensions: approx. 188 (L) x 38 (W) x 38 (D) mm (7.40' x 1.4' x 1.4' inch) Package included : 1 x EC & Temp Meter 4 x AG13 button cell batteries 1 x User's Manual
-
3.6 of 5.0 with 43 Reviews
SALE PRICE: $57.55 43% OFF
Manufacturer: iPower Distributor L&G
Brand: National Garden Wholesale
Model: 716010
Manufacturer: iPower Distributor L&G
Brand: National Garden Wholesale
Model: 716010
This revolutionary EC meter is powered by a magnet instead of a battery! A gentle shaking action generates the energy to power this simple, yet sophisticated meter. With just a few easy steps you will get a quick & accurate reading of the electrical conductivity (EC) of your nutrient solution. This patented meter will completely simplify your growing experience and success. Green LED display. No batteries required. Factory calibrated. Automatic temperature compensation. Automatic on/off function. Waterproof.
-
3.6 of 5.0 with 8 Reviews
SALE PRICE: $58.55 1% OFF
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Your METTLER TOLEDO product has been designed and manufactured for years of reliable service. For added peace of mind and budgetary control, add a 12 month Extended Warranty for your pH or conductivity meter. An Extended Warranty covers labor, parts and travel for failures due to defects in material and workmanship. Repairs are performed onsite whenever possible (Excludes failures due to misuse or abuse).
-
3.6 of 5.0 with 6 Reviews
SALE PRICE: $59.99
Manufacturer: FLIR Systems
Brand: Extech
Model: EC100
Manufacturer: FLIR Systems
Brand: Extech
Model: EC100
Conductivity/Temperature Meter. Waterproof meter with high-accuracy multi-ranging sensor. Features Auto Power off with disable.
-
3.6 of 5.0 with 18 Reviews
SALE PRICE: $60.41 89% OFF
Manufacturer: YSI
Brand: YSI
Manufacturer: YSI
Brand: YSI
Conductivity cell without built in temperature sensor. SI cell constant K equals to 1.0/cm. Cell constant 100/m. Made of pyrex 7740 material. Measures 25mm OD, 191mm length, 21mm chamber ID, 76mm chamber depth.
-
3.6 of 5.0 with 29 Reviews
SALE PRICE: $60.65 60% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
|
This Hanna mini controller has been specially designed for water conditioning and growing applications. Compact in size, it can be mounted in confined spaces or even right next to the vat or barrel containing the chemicals. This meter permits automatic control of installations previously checked manually. EC measurements are shown on the display and the multicolored LED continuously indicates if the mini controller is in measurement, dosing or alarm mode. BL 983313 measures in the 0 to 1999 microseconds/cm range. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need. The overtime control system advices users when the relay is active for too long, helping to prevent over dosage. This model is supplied with mounting brackets, transparent cover and instruction manual. Range: 0 - 1999 microseconds per centimeter. Resolution: 1 microsecond per centimeter. Accuracy: +/-2 percent F.S. Calibration manual with CAL trimmer. Setpoint adjustable from 0 to 1999 microsecond per centimeter. Overtime adjustable, typically from 5 to approx. 30 minutes. 115/230V Power supply. Measures 3-3/32" Length by 1-57/64" Width by 3-11/16" Height.
|
|