|
|
-
4.8 of 5.0 with 4 Reviews
SALE PRICE: $157.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, AC Volts, LCD, 1/32 DIN, 4-Digit, 0-250 Volt Input, Indication Only, 12-24 VDC
-
4.8 of 5.0 with 10 Reviews
SALE PRICE: $158.00
Manufacturer: Unico
Brand: Unico
Manufacturer: Unico
Brand: Unico
UNICO Quartz, 10x2 mm, 0.5ml, UV-Vis , each, S-90-354Q is a reliable and dependable addition to the UNICO Spectrophotometers family of products
-
4.8 of 5.0 with 11 Reviews
SALE PRICE: $159.00
Manufacturer: Unico
Brand: Unico
Manufacturer: Unico
Brand: Unico
Tired of sore legs and feet? We have an answer! Try our 1/2" thick Anti-Fatigue mats; you will be glad you did! Two sizes to fit your space requirements
-
4.8 of 5.0 with 37 Reviews
SALE PRICE: $160.85
Manufacturer: PAUL N. GARDNER CO. INC.
Brand: Gardco
Model: 2105
Manufacturer: PAUL N. GARDNER CO. INC.
Brand: Gardco
Model: 2105
|
The Gardco 2105 S90/Zahn-type viscosity cup has a 219 to 1,627 centistokes (cSt) viscosity range and is suitable for testing fluids such as cements and other adhesives. Efflux times range 10 to 60 seconds. It has a stainless steel body with a loop handle for hand-dipping into a liquid container and a finger-ring for maintaining a vertical position during use. The orifice diameter is calibrated against National Institute of Standards and Technology (NIST) for testing standard oils. This Number 5 Zahn-type viscosity cup meets ASTM International D4212 standard for measuring viscosity using dip-type cups. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National In...
-
4.8 of 5.0 with 12 Reviews
SALE PRICE: $161.84 84% OFF
Manufacturer: Plast-O-Matic
Brand: Plast-O-Matic
Model: GYWX800V-PV
Color: Dark Gray
Manufacturer: Plast-O-Matic
Brand: Plast-O-Matic
Model: GYWX800V-PV
Color: Dark Gray
|
Series GYW flow indicators utilize a double-wall construction and are used on flanged piping systems handling highly corrosive and ultra-pure liquids compatible with Pyrex glass. They cannot be used with hydrofluoric acid or sodium hydroxide as they will etch the Pyrex cylinder wall. Natural polypropylene ends are standard and are also the least expensive. FKM seals are standard. These indicators will fit 1-1/2" smooth face standard companion flanges as well as DIN (European standard) flanges. Two flange O-ring seals are supplied; therefore, other gasket materials are not required. An optional fluttering device is also offered. Flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system. For use with ultrapure liquids or chemicals compatible with acrylic. O-ring seals are used on indicators allowing them to seal at extremely low pressures as well as high pressures. Flow indicators are full ported, eliminating any possible flow resistance. Standard O-ring seals are Viton. Standard fasteners are stainless steel. The transparent outer cylinder wall is high impact strength acrylic. The inner wall (wetted) is Pyrex. Made of PVC.
-
4.8 of 5.0 with 21 Reviews
SALE PRICE: $163.16 10% OFF
Manufacturer: Markes International
Brand: Markes International
Model: C2-BXXX-5259
Manufacturer: Markes International
Brand: Markes International
Model: C2-BXXX-5259
Air Toxics (C2 - C14, TO-17), Glass 3.5" x 1/4" Thermal Desorption Tubes, pack of 10.
-
4.8 of 5.0 with 48 Reviews
SALE PRICE: $165.00
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32461-07
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32461-07
Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters’ inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialists for quotes on acrylic meters with special requirements. Meter with valve provides flow control through a highly durable meter body Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment.. Integrated precision valve allows precise manual flow across the full scale.. The flexible design allows for panel or bench mounting.
-
4.8 of 5.0 with 39 Reviews
SALE PRICE: $165.51
Manufacturer: YSI
Brand: YSI
Model: 251401LP1Y
Manufacturer: YSI
Brand: YSI
Model: 251401LP1Y
This product is an accessory for YSI pHotoFlex Colorimeters and 900 Chlorine Colorimeter
-
4.8 of 5.0 with 32 Reviews
SALE PRICE: $165.70
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0115
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0115
The flow cups offer a more precise vicosity measurement compared to a dip cup. A stand is used to hold the flow cup level and allows the operator to control the start measurment time. Jacketed stands or waterbath stands are available to control the sample temperature prior to and during the measurement. The flow cups have a sturdy design to prevent damage during handling and cleaning. The DIN Flow Cup holds 100 ml +/- 1 ml, and has an integrated orifice with a diameter of 4 mm +/- 0.02 mm.
-
4.8 of 5.0 with 23 Reviews
SALE PRICE: $167.40
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-83303-13
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-83303-13
Select a path Length to suit your analytical needs standard size cuvettes are the Type most often used for routine analytical needs (83301-02 to 83301-07). use skus 83303-02 to 83303-17 for fluorimeters.
|
|