|
|
-
4.7 of 5.0 with 47 Reviews
SALE PRICE: $195.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Hedland
Manufacturer: COLE-PARMER
Brand: Hedland
FEATURES Direct readings Install in any position 360&Deg; Rotatable Guard/Scale Easier to Read Linear Scale No Flow Straighteners or Special Piping Required Insensitive to Shock and Vibration Good Viscosity Stability Temperature up to 240&Deg;F Accuracy +/-2% Full Scale Repeatability +/-1% Special Scales Available
-
4.7 of 5.0 with 46 Reviews
SALE PRICE: $197.00
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32044-06
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32044-06
The product is correlated flowmeter, it features accuracy: 2 percent full-scale, material (fitting): aluminum, material (Float): 316 SS, material (housing): aluminum and material (flow tube): borosilicate glass.
-
4.7 of 5.0 with 35 Reviews
SALE PRICE: $199.00
Manufacturer: Baoshishan
Brand: Baoshishan
Manufacturer: Baoshishan
Brand: Baoshishan
Applications 1. Extract serum from blood            2. Extract the supernatant from a variety of samples 3. Rapid subsidence of samples           4. Separation of trace blood cells 5. Microbial sample processing          6. PCR experimental division centrifugal Note All products have been checked and packaged in good condition before shipping After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution. Please take a few seconds to leave a great feedback if you are satisfied with our product
-
4.7 of 5.0 with 3 Reviews
SALE PRICE: $199.95
Manufacturer: SunLight Plastics
Brand: Unknown
Manufacturer: SunLight Plastics
Brand: Unknown
An all around meter for constant monitoring of nutrients. It measures PPM, pH and Temperature. Its large illuminated green LCD display allows easy reading from a distance. Both pH and PPM are temperature compensated for accurate readings. The electrodes are replaceable. Calibration screws are conveniently located on the front for easy access. The chip is programmed to use the international water standard 500 PPM = 1 EC TDS measurement. It uses a standard 120 volt AC current to low voltage DC power supply. The 24-7 Nutrient MonitorTM comes with 4voz bottles of 1382 PPM, pH 4.0 and pH 7.0 calibration solutions.
-
4.7 of 5.0 with 1 Reviews
SALE PRICE: $201.99
Manufacturer: Oakton
Brand: Oakton
Manufacturer: Oakton
Brand: Oakton
Two important measurements in one instrument. The PCTestr tests conductivity and pH while the PTTestr tests EC and pH. They feature easy-to-read displays, push-button calibration, HOLD function, and error messages. Valox® housing and stainless steel electrodes offer good chemical compatibility and durability, and are designed to float,. All waterproof Testrs have replaceable sensors.
-
4.7 of 5.0 with 42 Reviews
SALE PRICE: $202.00
Manufacturer: COLE-PARMER
Brand: Cole-Parmer
Model: AO-05802-12
Manufacturer: COLE-PARMER
Brand: Cole-Parmer
Model: AO-05802-12
Automatic buffer recognition, absolute and relative ORP measurements, and automatic temperature compensation ensure measurement accuracy. AO-05802-12 pH/ORP 300 features two sets of programmable on/off relays for high/low control to activate an alarm, a pump, or another device. Cole-Parmer pH/ORP controller and transmitter offer features found in more expensive models. Backlight LCD for clear measurement display. Automatic buffer recognition of us and NIST buffers. Universal power supply input from 100 to 240VAC. Easy-to-install 1/8-din compact plastic casing economical option with two SPDT relays.
-
4.7 of 5.0 with 36 Reviews
SALE PRICE: $202.15
Manufacturer: Varsal, Inc.
Brand: Varsal
Model: 450-321-Q-1
Manufacturer: Varsal, Inc.
Brand: Varsal
Model: 450-321-Q-1
Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: >800 newton meters. Percentage transmission: >80%@2730 newton meters. Matching tolerance: within 0.3%@2730 newton meters
-
4.7 of 5.0 with 3 Reviews
SALE PRICE: $203.12 1% OFF
Manufacturer: GPI
Brand: GPI® The Proven Choice®
Model: 126300-202
Manufacturer: GPI
Brand: GPI® The Proven Choice®
Model: 126300-202
The GPI model 126300-202 is a MR 5-30-L8N Aviation MR 5-30 Series Mechanical Fuel Meter. This model is used with personal aircrafts. Its flow rate is 19 to 114 LPM, and its pressure rating is 50 PSI. It has NPT or BSPP fittings and its made of aluminum. Its display is 4-digits, Total: 8 Digits. Its unique features are that it has a large, easy to read display with turn knob reset. To use with Gasoline, Gasoline/Ethanol blends at levels designated as "gasohol" (E10 maximum), diesel, kerosene and aviation gasoline (AVGAS 100LL) and kerosene grade (JET A). It has field calibration and has a 1 in. mechanical connection.
-
4.7 of 5.0 with 45 Reviews
SALE PRICE: $204.26 5% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon BS/IP/RF-7 U-tube reversed-flow viscometer has a 600 to 3,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 3.0 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 7 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet indus...
-
4.7 of 5.0 with 15 Reviews
SALE PRICE: $205.00 1% OFF
Manufacturer: Racine Federated
Brand: Hedland
Model: H600A-002
Manufacturer: Racine Federated
Brand: Hedland
Model: H600A-002
Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.
|
|