|
|
-
4.6 of 5.0 with 39 Reviews
SALE PRICE: $198.00 1% OFF
Manufacturer: Oakton Instruments
Brand: Oakton Instruments
Manufacturer: Oakton Instruments
Brand: Oakton Instruments
You'll never loose the Oakton WD-35650-10 ORPTestr10 by dropping it into a tank or pond; the waterproof ORPTestr floats! IP67-rated housing protects the instrument from rugged field and plant environments. Push-button calibration lets standardize tester in calibration solutions, or making it agree with an established work standard|Replaceable sensor on the WD3565010 lets you reuse meter body many times without losing waterproof and dustproof protection. Large surface area platinum band sensor gives a faster, more stable response.
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $199.00
Manufacturer: Sper Scientific
Brand: Sper Scientific
Manufacturer: Sper Scientific
Brand: Sper Scientific
This is the *WORLD'S SMALLEST* Light Meter! This tiny light meter is less than ¾†thick, weighing only 4 oz. (120 g) and is easily carried in a shirt pocket. The controls, display and sensor are all neatly contained and protected within the folding case with directions printed right inside the cover. When open the sensor may be extended for remote use or snaps into a fixed position atop the case. Units features bar graph display, auto power off, and hold functions and indicates low battery and over range. Powered by 2 button cell batteries, (included). N.I.S.T. traceable certificate of calibration available
-
4.6 of 5.0 with 44 Reviews
SALE PRICE: $199.99 1% OFF
Manufacturer: UNICO
Brand: Unico
Manufacturer: UNICO
Brand: Unico
UNICO Square Cuvettes, Quartz, 2x5 Mm Window S-90-358Q
-
4.6 of 5.0 with 29 Reviews
SALE PRICE: $201.00
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32477-26
Manufacturer: Cole-Parmer
Brand: Cole-Parmer
Model: AO-32477-26
General-Purpose Acrylic Flowmeters are for liquids or air. Models for liquids have both English and metric direct-reading scales; models for air have English direct-reading scales only. Large-Body Flowmeters are for use with liquids and are direct reading, with PVC floats and 11/2'' NPT(M) PVC adapters. Flowmeters with High/Low Level Alarm are for use with liquids and feature an adjustable aluminum sensor bezel clamp with an enclosed one-watt reed switch. Two lead wires are included for hookup to your own electronics. Choose the high/low level alarm meters to monitor critical flow points. Units designed for in-line installation. General purpose liquid flowmeters feature easy-to-read dual scales (GPM/LPM). Polypropylene-reinforced fittings have aluminum stress rings for added strength. Machined high-quality acrylic rod stock, polished to a clear-as-glass finish. Flow ranges up to 50 GPM with model 32477-82.
-
4.6 of 5.0 with 28 Reviews
SALE PRICE: $201.39 1% OFF
Manufacturer: COLE-PARMER
Brand: Cole-Parmer
Manufacturer: COLE-PARMER
Brand: Cole-Parmer
The 01A meter is easy to handle and easy to use. You can mount this meter right at the nozzle for a quick read of the large 4-digit LCD Display. Use with gasoline (alcohol blends E15), diesel fuel (biodiesel blends B20) and kerosene.
1" Npt with adapters for use with 3/4" hoses
* Lightweight aluminum turbine meter.
* Flow range of 3 to 30 GPM (10 to 100 LPM).
* Powered by two AAA batteries that are easy to replace.
* Factory calibrated for fuel.
* Typical accuracy is ± 2.5% (accuracy can vary to ± 5%).
-
4.6 of 5.0 with 41 Reviews
SALE PRICE: $209.00
Manufacturer: Unico
Brand: Unico
Manufacturer: Unico
Brand: Unico
Micro-Cell Holder Kit for use with 10 mm microcuvettes. Includes adjustable x-y base and single cuvette holder for 10 mm square cuvette
-
4.6 of 5.0 with 22 Reviews
SALE PRICE: $210.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, DC Amps, LED, W96xH48mm, 3 1/2-Digit, 199.9A Full Scale, 1 Relay Output, 110 & 220 VAC
-
4.6 of 5.0 with 10 Reviews
SALE PRICE: $210.99 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
|
pH electrodes are commonly designed to produce and output signal equal to 0 mV when immersed in a solution with pH 7. But a constant output value at pH 7 occurs as a result of certain adverse events, such as: A broken bulb in the pH electrode, A short circuit in the cable or connector, or Magnetic force leakage in the cable or connector (for example, in case of excessive humidity).
In these situations, the instrument displays a false reading at pH 7 and the user may not be aware that corrective measures are necessary; particularly if the user is anticipating a pH neutral reading. To avoid this problem, HANNA® developed F.S.T. technology for HI 9813-6. With this special security system, a system failure will force a fixed value close to pH 4, rather than pH 7, and render the problem clearer to the user.
For added confidence in your measurements, the meter is equipped with two LEDs and a "CHECK" button. While pressing this button, upon immersing the electrode in the Cal-Check solution HI 50021P, one of the LEDs will light up to indicate the status of the meter. The green LED ("OK") indicates the probe is working correctly, while the red LED ("C&C" Clean & Cal) indicates the electrode needs attention.
-
4.6 of 5.0 with 32 Reviews
SALE PRICE: $211.85 12% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon MKVC-50 modified Koppers vacuum-calibrated viscometer has a 180 to 3,200 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. It has a two-piece design with sample reservoir and calibrated capillary. The MKVC-series size 50 viscometer uses a 178mm depth water bath (not included) for temperature-control testing, and a 300mm Hg vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet indus...
-
4.6 of 5.0 with 24 Reviews
SALE PRICE: $211.85 15% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon MKVC-200 modified Koppers vacuum-calibrated viscometer has a 9,600 to 200,000 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. It has a two-piece design with sample reservoir and calibrated capillary. The MKVC-series size 200 viscometer uses a 178mm depth water bath (not included) for temperature-control testing, and a 300mm Hg vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet...
|
|