Water Quality & Instrumentation - Page 414

Manufacturer: CANNON INSTRUMENT CO. Brand: CANNON Instrument Model: 9724-G56

The Cannon 9724-G56 BS/IP/RF U-tube reversed-flow viscometer has a 6.0 to 30 centistokes (cSt) viscosity measuring range and is suitable for the measurement of opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.03 centistokes per second (cSt/s) for calculating kinematic viscosity. The BS/IP/RF-series size 3 viscometer uses a 280mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This U-tube reversed flow viscometer meets the ASTM International D446 standard for reversed-flow viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet ...

Manufacturer: Technical Glass Products Brand: Technical Glass Products

Ubbelohde Viscometer Calibrated and certified. For kinematic viscosity measurement of transparent liquids described in ASTM Standard D-445. Minimum sample volume: 11mL. Requires liquid depth of 241mm. ASTM specifications. Standard D-446. ASTM size: OC. Viscosity range: 0.6G(3mm/second. Constant: 0.003. This listing is for Each _DELETE_

Manufacturer: YSY Brand: ANDY

CP-7A-35W Double Holder Optical Lens Hand Edger Manual Lens Grinder AC Motor Characteristics: *Single Wheel; Double holder; AC Motor *35W type grinding wheel: Width 35 mm, right rough grinding 16 mm, left fine grinding 19 mm Technical Parameters: Power Supply: AC 220 V/ 50 Hz; AC 110 V/ 60 Hz; 10 W Dimension: 350 x 220 x 210 mm Weight: 5.0 kg Headling time：4days you will receive it within 5-9 working days.

Manufacturer: YSI Brand: YSI Model: 251410LPY

This product is an accessory YSI pHotoFlex Colorimeter

Manufacturer: JYP

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Material: K9 Size:5*5*5MM Surface type: Lambda/4 Size Tolerance: +/-0.1MM Finish: 40-20 Wavelength:400-700NM Four incident surfaces with AR-coated film ,the slope with non-polarizing beam splitter Extinction Ratio: 1000: 1

Manufacturer: Oakton Brand: Oakton Model: WD-35630-54

These pH/conductivity/temperature probes were specially engineered with a slim design so you can use the pH/CON 10 meter to test ground water. Probes measure only 1.7" (4.3 cm) dia and easily fit into 2" (5.1 cm) well heads.

Manufacturer: Thomas Scientific Brand: Varsal Model: 406-323-Q20

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers.

Manufacturer: Racine Federated Brand: Hedland Model: H600A-010

Flow Meter For Petroleum Fluids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 0.876 S.G. Materials: 2024 - T351 Anodized aluminum body, piston and cone. COMMON PARTS are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: SAE 1070/1090 Carbon Steel, Retaining Spring: SAE 1070/1090 Carbon Steel, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Flowmeter,16-160Lhr 1/4"Npt

Manufacturer: Thomas Scientific Brand: Thomas Scientific Model: 9SOG10

Semi micro spectrophotometer cell of 0.9mL can be reduced by elevating the cell so long as the light beam does not strike the walls of the cell. If beam width of spectrophotometer approaches 4mm, a suitable self masking cell should be used. Nominal working volume. 334-2500nm spractal range. 10mm light path cell. Measures 12-1/2mm length by 12-1/2mm width by 46mm height.