Outside Micrometers - Page 43

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 118-129

The Mitutoyo 118 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001”, depending on the model, with a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 216RL-3

The Starrett 216RL series outside micrometer has a mechanical digit counter for ease of reading to 0.001”, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a black enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: iGaging Brand: iGaging

iGaging 3-4" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second! linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 3-4"/75-100mm Carbide tipped spindle Resolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble. SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2. Ball Attachment Included. Case included 2 Years warranty

Manufacturer: Starrett Brand: Starrett Model: 3732XFL-3

The Starrett 3732 Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The 3732 series includes a large, easy-to-read, high-contrast LCD digital readout for clear readings. With its automatic OFF functionality, smooth friction thimble for uniform pressure, and balanced frame design, Starrett products provide comfortable and accurate measuring Its no-glare satin chrome finish minimizes annoying surface glare under bright lights indoors.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-242-0

The Fowler 54-860 series digital outside micrometer has a blade-style anvil/spindle pair, a choice of measuring range, and an LCD with an inch/metric switchable resolution for measuring groove diameters of shafts and workpieces with narrow or recessed features. Carbide measuring faces provide wear resistance. A switchable resolution of 0.00005" and 0.001mm provides precise readings. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleBlade anvil/spindle pairMeasuring rangeVariesResolution0.00005"/0.001mmThimble styleFrictionBlade thickness0.030"Blade width0.256"Blade depth0.315"Data outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may ...

Manufacturer: Starrett Brand: Starrett Model: 222XRL-1/2

This Micrometer reach over the edge of sheet metal and take measurements away from the edge toward the center. Also for other gaging jobs where a deep throat micrometer is needed. Rounded anvil on 1" size gives a point contact for more accurate gaging; flat anvil is also available. The 1/2" micrometer is satin chrome frames; 1" micrometer frames have black wrinkle finish.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 03.10001

The Brown & Sharpe TESA precision outside digital micrometer has a mechanical digit counter for precise reading to 0.1mm, a vernier scale in metric units for taking precise outside diameter (OD) measurements, a friction drive thimble mechanism for uniform pressure during adjustment, and tungsten carbide faces for wear resistance.The vernier scale on the thimble and sleeve is graduated to 0.001mm, with slanted markings on the barrel to help reduce parallax errors when reading, and a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: ToolUSA Brand: ToolUSA

0-1" Micrometer That Is Divide To 0.025" Increment Meter On The Rod Or Even More Finely Divides 0.1" Into 25 With The Turning Knob (0.004"). This Item Is In Sae Only And Another Item In Metric Is Also Separately Available. * Measures From 0-1" * In Increments Of 0.025" * Adjustable By Turning Knob * Sae Only * Prescision Made For Accuracy BLACK FRIDAY Specials -Cyber Monday & Holiday Deal

Manufacturer: Scherr Tumico USA Brand: Scherr-Tumico Model: 01-0902-14

This is made by Scherr Tumico Model # 01-0902-14

Manufacturer: ezMachineTools Brand: ezMachineTools

This inside micrometer caliper type has a range of 0-1", accuracy of 0.001" and SR0.3mm tip.